Jump to content
SAU Community

C33 Taxi Project


Recommended Posts

  • 6 months later...

Well its been ages since i posted!

well i was side tracked for a while as i bought an r32 sedan daily, had full cage, rb20det td06, gtr inj nistune etc was a blast, put some KFs on it and some minor changes did raleigh matsuri! only got 5 laps as i fried the ECU as wheel shorted 4 ecu wires under passenger guard but still got to drift my mates NA s13 and was a blast, got back and sold it and decided to finish my laurel! Some pics of 32 and matsuri

11251380_923003604386393_640517240721235

11188205_917692998250787_179905215858976

So i'm not really sure what i was up too last update, but ill just throw it all together!

Bought some goodies, bride zeta copy (will prob get a genuine seat in a couple months as it isnt as good as i thought) DBA T2 series rotas, Project Mu 800 pads, 20w/50 Royal purple oil, then 5 litres of Royal purple diff/gearbox oil, nismo thermostat and hks filter

11638017_938698672816886_37682633_n_zpss

Bought an eboost 2! Which i'm going to mount in the clock part in dash surround

eboost_zpsk6suw2gi.jpg

Got some defi bf series gauges + control box

11647413_938698056150281_813773631_n_zps

Some of my PBM catalogue! have toe/traction arms too

10425397_830025110350910_551609463780353

Gktech adjustable Tie rod ends, was either these or SPL but they were about 300 to my door and these were basically a 3rd of the price and are really good

10307242_831526366867451_684899192146000

Obviously because i have te PBM catalogue thought it would be different to paint the cradle gold too, just some xport gold paint, some break cleaner and wa la! Also put in Solid cradle mounts! So looks all fancy and shit even though no one will see it haha.

11638025_938698052816948_330989304_n_zps

While i painted the cradle gold and put all the arms in, i put in my r200 with a Nismo 4.11 2 way centre aswell. Couldn't really get a good pic of the under carrige but heres a photos i take

11349015_938698059483614_435799043_n_zps

11652228_938698062816947_1481612291_n_zp

Front PBM knuckles, PBM LCA/tension rod combo, PBM Tie rod, Gktech tie rod end, along with t2 DBA rotors and project mu pads in, progress and done!

11354785_938690552817698_1215015618_n_zp

11638127_938690559484364_267351228_n_zps

11651241_938690569484363_162954142_n_zps

11541154_938690549484365_1708486030_n_zp

Now since the engine going in and taking the rear out ages ago, it had been on jack stands for about 4 months i reckon. It was a good feeling it seeing it rolling around, even if there was postive camber here, toe here, etc was just nice to see it out of the garage! I saw the paint properly for the first time too, gave it a clean in the sun as when i got it back from paint, it went away and yeah was rad! Also got this Mario painted on my under bonnet! People say its rad and ask why, well massive fan of mario as a kid and thats it. Local graffiti guy did it, he owned a really clean hr31 gts he was a bit out their but the product is awesome!

11412224_933849803301773_997064197746714

11535825_935415099811910_146023407588566

Today i had the mates over helping me as i want things to happen, as i'm loosing my license for about a year and wouldn't mind to drive it. I've got Sam white ( Whiteys wiring ) coming out next week to finish off my battery relocation, wiring in my Walbro 460, wire my Eboost2 and defis in and also change the plugs on the injector loom to suit the Xspurt 1000cc! I will get him back to tuck loom etc once its all done, just to tidy up the engine bay. So today we finished off the front end, put all the interior back together, fuel pump in cradle, fuel reg on and vacum line done, radiator in, power steering/alternator on with Gates belts. Pulled the wiring out for sam as it was cluster f**ked... headlight plugs in, strut brace in etc. Doing another weekend on it next weekend and hopefully with the wiring done itll be ready for fab work and off to MDS/APC to be done!

11652022_938690509484369_774108629_n_zps

11652139_938690516151035_461172676_n_zps

11652173_938690502817703_1743993444_n_zp

I did buy some rare SSR meshies in 15x9+13 but however the tie rod fouls on the rim, so unless i run a 50mm bolt on there not possible for me to run anything smaller than a 17 id say, it sucks but ahwell!

SSR%20mesh_zpstluuugzy.jpg

Still alot of little things to do, final check overs etc but the last 2 weeks has been full on and couldn't of done it without my mates! Keen to get more done and then do a few track days to sort out the steering etc and do raleigh last matsuri!

Link to comment
Share on other sites

  • 3 weeks later...

So i had a bet with some work mates that i wouldn't be able to fit my 15s, due to S14 turbo brakes 280mm rotor and bigish calipers so i took them up on the bet and said ill get them fitting (they didn't clarify wether i could use spacers or not haha) anyway, i got the rears on, fit nice with basically no camber. Its gonna have to be slammed for it to work and look good, but keen!
11692723_944170778936342_384167970595550

lowered the rear a little, still want to go lower and this is how it sits. Im going to get my fibreglasser to cut that little mud guard flap thingo off the rear bar addon as i don't really like it and it doesnt follow the body line of the car anyway, but with that their its about 20mm off the ground, and about 50mm from diff
11713495_946344685385618_2034688661_n_zp

Today i started to get the fronts working, i had a 20mm bolt on anyway because of KF's put the fronts on and it fould on the bottom of the LCA, as there is like a 2 step lip on the inside of the ssr's so i used slip on spacers to get it exactly to fit nice and an extra 5mm and its fine. I then discovered it fould on the shank of the Gktech tie rod end, i had S14 tie rod ends in a box so i went to put them on and they were too short. The spacers on the bottom of the tie rod are for bump steer, now having low correction PBM knuckles i wondered if i even needed the bump steer correction on the tie rod ends, so i messaged Gktech and they said no. So i'm taking the tie rod ends to work tomorrow to shorten the shank thread and ssr's will fit with no hassle than the poke ....
11719958_946344705385616_1539998782_n_zp
11721789_946358738717546_414762748_n_zps
11667118_946358735384213_682256739_n_zps

Got lock?
11720725_946344708718949_1874258952_n_zp[/url

As i said i had Sam from Whiteys wiring coming to do some work, he remade my injector loom with plugs to suit injectors, finished up the battery relocation job to the boot, Wired in Walbro 255 lift pump and my 044. I was going to go the 460 walbro but decided a surge setup would be something to consider aswell, So went down to local MSA on Saturday bought a 2ltr surge tank, 5 metres of push lock hose, MSA/Speedflow fittings, 044 pump bracket and a stainless fuel filter. We dropped the tank to replace the rubber lines under there aswell. Surge tank is bolted down with pump fittings on awaiting line, fuel rail has 90 deg bends with fittings to suit push lock, would of got it done but had to wait a week for the hose to come in. Will get that all finished up next weekend, so today i went and bought a battery as i wanted to see if all lights etc worked, and it put a smile on my face when everything worked! I haven't had power for over 1 1/2 years on this car, been awhile lol. All the power windows work, but for passenger back you can hear it so ill have a look at it sometime, probably something stopping it from going down as you can hear the motor

Here's the surge with MSA fittings and 044
11693829_941934332493320_808923986454237


Defi's and Eboost2
11693165_946344668718953_1014017345_n_zp

Fronts and fogs
11693036_946344655385621_1228282950_n_zp

Rear tail lights
11720539_946344662052287_1279257666_n_zp

another pic

11705082_944652295554857_519952317749582

So i'll get the tie rod ends sorted this week, get the wheels all fitted up, get it rolling half decent then come the weekend all the fuel lines will be done, tank bolted back up etc and should be ready to be sent off, pretty keen to see it do something other than sit in my shed lol

Edited by skyline32sup
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

so been a while, little update;

put the carpet back in the boot, wasnt a fan of just a surge and bear boot, wanted to keep it looking nice and clean. Bolted the surge and pump clamp and battery box to the floor and finished it all up
11774716_956956980991055_1601117221_n_zp

turbosmart fpr800 and stainless filter in the bay
11802061_956956984324388_1851115017_n_zp

had to do a whole lot of grinding (jack) to get the 15s to clear rear, threw a bolton on and it rolled!
11751273_950117495008337_478693068_n_zps
11787476_956957000991053_356602208_n_zps

it was such a mission to get it to work, and i've decided im not gonna run 15s, it just doesnt work. If i wanted to run small wheels, id go back to 4 stud. Sooo brings on more wheels then....... anddddddd decided the 17' game is where its at. So i sold my Work VS KF 18x9.5-23 and bought some rare kfs in 17x9.5-0 in JP, i won them and they cost a f**k load but ahwell. They came on friday and they have a bent lip, which wasnt shown and in description on the JP add but ahwell they go off tomorrow to get fixed and they fit well, with a little camber and guard work will be mint
11787213_956956420991111_423395985_n_zps

went in to JDM garage to get a part for my mate and ez had a fat man seat and i decided it would work, a recaro. They modded the rail for me to suit my laurel, however it doesnt fit so ill be taking to work to mod up and reweld etc ( fabricator life ). The day before i was going to go in to get the seat they put up a Genuine Greddy plenem with Q45 and tps etc, i couldnt resist and i walked out of there the following day with both haha.
11778052_956956594324427_750834373_n_zps

the seat rail had be modded to fit a real tall flamin mongrel in it, and it sits so f**king low to the floor, like chinease hands will be needed to put the rear bolts in once i mod them, and heres a pic test fitted, its comfy and nice will do the job for now
11793247_956956557657764_1103424590_n_zp

greddy plenum in, had the biggest rookie error took it off and the new one went on and i needed to put the knock sensors on the block and well... i forgot.. ha ahwell APC will put them on for me when it gets tuned and fabbed as im just too lazy, Last thing to do is change the throttle cable out which i took the old one out and will put new one in tomorrow with lighting and slave cyclinder bolts and thats about it.
11798104_956956410991112_14159497_n_zpsq

So yeah, i've also found some clear headlight/corner lights which ill be buying, only set in Australia so that will be cool. Hopefully not long till it runs, maybe laurel curse will stop me, we will see :)

Link to comment
Share on other sites

  • 1 month later...

Put the S14 throttle cable in the following day and slave, after ordering one from Tog parts and them giving me a 26 slave, ended up just getting a nismo slave bled the f**k out of it, turns out master is f**ked ehh guess thats what happens when everything sits for about 2 years and does and goes no where lol. Went to local bolt shop and picked up 2 new bolts

11997436_977081532311933_1758685071_n_zp

Had a mate help me putting weather sheilds on, for 2 reasons they are rare as f**k and didnt want to break them, and those clips were the biggest aid controlling shitstorm ever, along with the 3m tape aswell, but we got their about an hour later, 1-2 clips arent on properly but ill fix that later

11997056_977081525645267_1673822054_n_zpc

cant really remember what happened next, i played around with more shit, and as i was moving house i needed to get the laurel ready for Autoworks so spent a day under/in/on top of it and was finally satisfied with it and decided it was time for it to roll out of the garage ... i still gotta find the missing earth when i get it back as lights are all playing up etc, how i felt....

11992432_977081542311932_933869501_n_zps

oh yeah thats right, rushed around to get tyres on my kfs 17x9.5-0 and they just poke too much for me to let it roll, then i thought hold up ill raise the coils. Well turns out their was about 8 threads left, PBM are f**king low and yeah if your wheels dont fit with these coils, it just wont work so threw on the evo stockies and would figure out later. really wanted to run a PBM rlca but they dont offer - in their adjustment and i went to reduce track, therefore i dont have to have bulk camber and wreck my quarters to make wheels fit, future issue 101. Anyhow, before the towie come i took a photo

12000093_977081522311934_1623920806_n_zp

on the way......11997503_977079398978813_1565461379_n_zp

As i said previous post i found some clear headlight/corner lights well turned out the guy didnt want to sell them in the end... which sucked but i spammed and spammed and found the 2nd set in australia and he happpen to be down the GC. As Low.co customs had my rear lip to be modified i picked up the clear headlights with the covers on them (missing a chrome strip) and the clear corners. So f**king stocked, can't wait to get these on will be rad

11998796_977079202312166_2023382341_n_zp

11997495_977079368978816_1047087734_n_zp

photo upon arrival, in some good hands their with the boys, keen as to see the outcome!

11992292_977079388978814_61973179_n_zps0

plazaman cooler fitted up and wastegate elbow welded on

11904676_1182353745124937_11658945452356

micks weld porn lobster bend

11911697_977078998978853_1345687255_n_zp

oil catch can spot, away from the turbo etc

11997165_977079062312180_1835967337_n_zp

rocker covers painted wrickle black, just to tidy it all up and some speedflow fittings welded on for catch can

11997113_977078692312217_1545683050_n_zp

I had to upgrade injectors too 2000cc as the previous 1000cc would be maxed out with the power output, decided on 14-20psi settings. Also installed haltech flex fuel sensor for all the e85!

3' exhaust and jaz, is running a exhaust shut off valve that is in the cabin to queit it down for the 5.0

11998170_977078705645549_761937359_n_zps

rear section

11995546_977078722312214_831914887_n_zps

Ordered the Gktech RLCA as it was on special, and got them to fit it up 15mm shorter as its getting a wheel allingment

11668020_977078992312187_1582691265_n_zp

More kfs 17x9.5+16 basically skidders

11988495_976981932321893_574011764533172

Picked up a 4' K&N filter aswell, here is the present engine bay, cooler all done, oil catch can etc, the pipes bottom left of 1 picture is the radiator hoses and the 4' blast pipes, 8' of noise should make a bit of noise :)

12007065_977079008978852_1741535500_n_zp

11179985_977079005645519_718302761_n_zps

11998558_977078972312189_779644534_n_zps

That's about it, pretty super keen to get it all back so i can finish off the little things and then ill be doing morning sessions/friday nights to tinker around with the car etc.

Link to comment
Share on other sites

  • 2 months later...

Ahhh been a while...

According to my fab guys its known as suicide setup, its proven it works theirs a whole bunch of numbers behind it but i have an intake temp sensor, it hasnt been fully tuned yet but its been on the dyno for 2 hours and hasnt seen over 70 degrees so yeah just gotta wait for it to be tuned. I just took my fab and mechanics/haltech word that it does work and has been done before.

Right, well Laurel had about 2 hours dyno time at the shop, then turner was unable to spend enough time on it so i pulled the pin, brought the car home to save some coin and send it elsewhere. It goes off to Hi-power racing tomorrow, the turner who worked on it works out of that shop and they should be able to sort the car, it was having boost creep problems, changed the wastegate spring and hasnt seen the dyno since so hopefully that fixes it. Thermos got mounted too.

12026537_10153178287238424_259501020_n_z

12021955_10153178287293424_1540090966_n_

12032330_10153174316543424_1137652263_n_

So yeah, brought the car home, i had the clear corner light covers to put on, at first i really didnt want to do it... I bought a 2nd pair and used them, got a few photos to go off how i did it. Had to heat them up, i didnt want to burn anything so they were coming out every 2-3 mins then i was cutting the glue with a knife and trying to pry into them. Being a mirror glass on the inside i didnt want to break/mark that either as you would see it with clear covers, after about 30 mins i got the first one done! Second one took about 5 mins haha...... and they look cool. ps; yes my oven is messy. Put the covers on, i was worried with the ammount of clear silicone i had but i dont want them to get water inside them so i tried to balance it out, turned out alright! Where the corners meet headlights you can see some, but their was no one around it. Closed them up with some tape and let them dry and yeah put on the next day. I tracked down a spare set of headlight covers, but needed the money so i sold them to another laurel owner locally! cant wait to see them on his.

12167598_992496570770429_149192797_n_zps

12168060_992496567437096_332827953_n_zps

12167750_992496564103763_408006318_n_zps

Put them on the car the following day, along with the headlight covers, unscrewed my spare headlight chrome trim and put that on the headlights with the clear covers and put them in! Look so f**king cool! Now im a big old school fan of the 90's laurel with 15s and etc, so i found a genuine Japanese automobile federation (JAF) badge and put it on the grille.

12282909_1009220005764752_1592149754_n_z

So with them installed, the only thing i wanted to do before i sent it to get tuned was put my rear VS KFs on. With my PBM coils being american those dream boats love being slammed i had to max them height wise (about 4mm of thread left) to put the KFs on as they arnt going to fit stock guards, just sick of them being in my garage. I have adjustable RLCA so i removed 10mm from the stock LCA, wind in my camber arms etc and now im left with what seems a slight positive rear end. Once the laurel gets back from tune ill sort it out, my mate jack has a laurel and runs Ikeya rear end and his camber arms with his RLCA shortened 10mm has heaps of room, where my camber arms are maxed. Ill first move the locking nut as its f**king huge and see if i can get like -1.5/2 of camber as thats what ill want, the less the better but ill have to do some guard work to make these fit and since the 9.5-0 cost me a fortune i want them to fit lol. So its pretty mexican atm, due to going for a tune i havent touched the height of the car as it barely gets on my mates truck atm ill sort it all out when i get it back.

_12_zpscyha3pri.jpgc

Complete engine bay pic feat Mario

12208698_1003270499693036_74651888393184

Trying to sort out why my lights arnt working, being a massive noob with wiring i just gave up and felt this was necessary

11988428_1006640236022729_86315206041070

Awaiting a rail from japan for my brix and once that arrives which should be tomorrow i can put it in.

So yeah, goes off to get tuned tomorrow and thats about it, this is how its looking atm. Yesterday marks 3 years ive owned this car, 2 in which its been a garage ornament so im super keen to get it all tuned sort out the minor issues, get another rear section made up for quietness and ill daily it for a bit come January when i get my license back! Also got a spot in QLD matsuri, got a shed too so am many keens for this! Although ive now figured out why having decent powered cars sucks for skidding as ill need like 20 brand new tyres.... but still keen as a bean!

12188668_1000085733344846_1051973426_n_z

Untill next time, keep on keepin on'

Link to comment
Share on other sites

i'm liking the progress :)

still do wonder how much cooler intake temps would be with the cooler in front of rad, as logically that would be drawing ambient air through the cooler, not warm, but i'ma be quiet :kiss:

woohoo skids to come! :banana:

Link to comment
Share on other sites

This is what was posted about my setup when it got some interesting comments;

"""" Just some thoughts on all this. Engine coolant temperature at engine outlet assume 110 degrees Temperature of coolant after radiator and entering engine assume 90 degrees Ambient temperature let's say 20 degrees. Temperature in vicinity of radiator must equal around 40 degrees. (ambient plus rejected heat)

If the inlet air temperature to turbo is 20 °C (293K) and the boost pressure is 1.1 Bar (pressure ratio = 2.1) the theoretical outlet temperature will be:

Theoretical outlet temp = 293 x (2.1)0.286

= 293 x 1.236
= 362K (89 °C)
This means that there is a temperature rise of 69 °C

However, this doesn't take into account that the compressor efficiency will be less than 100 per cent. If we assume a compressor efficiency of 70 per cent (typical for a good turbo):

69 / 0.7 = 98.6 °C
This is a temperature increase of 98.6 ° which when added to the ambient temp of 20° means that the actual outlet temp will be:

20 + 98.6 = 118.6 °(say 119 °C) . . Now heat moves hot to cold. Intercooler is hotter than surrounding air. Therefore Heat is rejected. The whole design of radiator and intercooler is to reject heat. So many other factors come into play. The ECUs like Haltech are tunable this allows us to compensate for the compromise that is designed into every engine. Intercooler temperature is just a part of the big picture. Yes heat does affect power it does not matter to the engine if the heat is in the form of coolant temp, oil temp, ambient temp, combustion chamber temp or inlet temp It all has to be accounted for. Let the real work testing begin. All of the above can be easily googled if you feel the need. """

Laurel went off today woo!

12278742_1009497722403647_33786353375943

12270519_1009558115730941_1135170107_n_z

Link to comment
Share on other sites

  • 4 weeks later...

So laurel went off to get tuned, the intercooler didn't work behind radiator, the intake temp was reaching 70 degrees when it should be around 40 ish. So sent it off to MDSfab to re-locate it to the front bar. When doing so we found some more mistakes that needed to be corrected. My oil cooler was in a bad spot anyway so that was something i wanted moved out of the way, the re-location of the filter to be moved too. Also discovered the previous shops had some the El' dodgy on my car doing work incomplete/incorrectly and charging me for it. Mixed oils etc was a whole bunch of shit which im sorting out with the shop atm to resolve this. I also got a new rear section with a muffler to 4' single as the twin pipes were just too loud for me atm ha.

Intercooler moved

12395287_1020037264683026_1303833055_n_z

New rear section

12388041_1020037331349686_1435910988_n_z

Chillin out front'

12395644_1020037251349694_647604663_n_zp

I don't have the pics of re-location of oil cooler etc but ill update it at a later date!

Continuing on, All the fab work got all sorted car went back to Hi power to get tuned... ANDDDDD... more problems. Wastegate vacuum lines were blocked, eboost wiring got melted on dump so had to be re-wired. It then hit the Dyno on 98 pump and was all good made 400hp on 18psi! Then i got a call saying my fuel pump had died. So rang Brisbane fuel injection services and got another replacement 044 the same day, which was awesome so dropped it back at the shop for them to finish the following day. I then got another call the following day that the wiring harness had caught on fire.... at this point i was getting over it and this " laurel curse " was setting in, whole dash passenger side had to be pulled out etc, all other plugs swapped over etc which took them hours and hours and cost me $$$ but had to be done. It then hit the dyno 2-3 days later and was fully tuned! Made 480hp on 23 psi, and 425hp on 20 psi both on 98. I didn't end up going E85 had a long chat with Ivan and it wasn't beneficial for me atm to be running it, but at any time i can as I've got flex sensor etc all setup. I'm stocked with the tune, I've gotta see how it goes in January when i get it regod to see how the tune actually goes and if anything needs touching up Hi power said they will sort me out! I got the car home today and will put it all back together, get my KFs fitting and get it ready for rego next month along with my license. Itll be receiving a full cage too and a tonne of mod plates, I've got a busy time over Christmas holidays.

Leaving Hi power.

12380488_1020037248016361_608989573_n_zp

Big shout out to all my mates that have helped me, Hi power and MDSfab! Not long and ill finally be happy with it and have the perfect street car,

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...
So i got the car home, the following day i drove it out onto my front lawn and noticed it had a massive power steering leak from the high pressure line, so put it back into the garage pulled the old lines out and replaced with speedflow/braid and new rubber hose from rack pretty much deleted the factory pressure line from rack.


$300 dollars later and ready to rumble!

12540058_1036463116373774_1469851782_n_z


Pump


12606945_1036447013042051_374403139_n_zp


Resivor

laurel_zpsxupdjvcv.jpg


Rack

12606981_1036447029708716_175588092_n_zp


Well, sorted that and is mint!


I had no headlights, my blinkers were on and indicators where on but no blinking etc was really weird, went over all the fuses and what not, i checked earths etc. Anyway i couldn't sort it so a mates mate come around who is an auto leccy and one of my earths werent working properly and changed a plug and now all my lights work, which is mint!


I got mod plate for seat/cage and a El dodgy RWC. Changed the rear KFs over to my smaller ones and set LCA to stock length as it was -10. Still have a bit of toe but wheel alignment will sorted that!

12570823_1036463106373775_2073068348_n_z


Then it all went to shit....... tried to start it wouldnt start, thought my battery was shit as its getting power drained somewhere so i charged it and nothing happened. At this point i was super pist, this car keeps breaking and driving me up the wall! I just got my license back so i've been busting to drive it .. legally lol. Anyway had a mate come over, and we went down to JDM GARAGE saw ezza and the boys and he let me borrow a CAS to test, we checked fuel pressure at rail and had heaps, then took the cas of and tried the one we borrrowed and was the same. So then checked coilpacks for spark and had none.... tested coilpack plugs and had fire! It just seemed off that all my coilpacks would have spark to the plug but not to the coilpacks themselves, anyway headed back to JDM GARAGE and had a talk to ez and he agreed, and let me borrow some coilpacks. Got home tried them and yep nothing, only thing we could think of was Ignition module in the Haltech wasnt letting it fire.... which is not what i wanted. Borrowed my mates stock ECU for his R33 plugged it in and BOOM had spark. Dropped my ECU down to HI power and they were gonna save the file and send it off to haltech. Hopefully its just the fuse, ehh getting so over it! Anyway took a photo of my HKS cam gears as i never took photos of my engine when i put in the cams/cam gears


so basically this is how i feel

12584153_1036447069708712_785258476_n_zp


12576308_1036447049708714_594269493_n_zp


So yeah guess ill wait till Hi power get back to me about my ECU hopefully it doesn't cost me an arm and a leg, but we will see. I also bought a 6 point cusco full cage too! ordered a 7 row oil cooler as i have a 12 row and its making my cooler piping sit to low so hopefully with the smaller cooler my cooler piping can be modded and it wont be on the ground


back to being an ornament

12562653_1036463103040442_902722054_o_zp

Link to comment
Share on other sites

  • 9 months later...

well this has been ages and not sure if people even read these anyway

 

ahh where we left off..... thats right my ECU f**ked out, the ignition module and some internal fuses f**ked out due to battery being dead and Haltech fixed it for nothing. It had to get retuned and ran even better making 475 HP on 19 PSI pump fuel.

 

I got the cage installed, gauges sensors put in by JDM garage and a wheel allingment @ Fulcrum capalaba. When i was leaking fulcrum my rack exploded so i drove home with no fluid and now have a semi noisey power steering pump, im sure itll give up sometime just eh. 

 

Then i went through 3 steering racks, redid that pressure line 4 times as it kept getting burnt, rack seals f**ked out and about 5-6 months of doing nothing it finally works!

 

In the time since jan ive bought a C32 S1 laurel rolling shell that is in storage for 2k18 project, also bought a RB25de neo c33 laurel for a daily, was basically on stockos now sits on southernway mesh 15x8-8, s club lip, autech skirts, cusco arms etc and its kept me streeting/drifting while black laurel has had the curse! So here they both are!

14812933_1229160413770709_95027358_o.jpg

im waiting on a set of weathersheilds for it and the new rear bar and its complete daily!

14876247_1229170840436333_990067369_o.jpg

 

black laurel current still has issues but its running and driving, its currently on stands as im playing around with suspension setup to try make my 9.5-0 kfs poke less ive got -2 camber on the rear and really don't wanna go more ( it looks like -0 ) something is still draining the battery, dash background doesnt work, high beams dont work and no wipers, think thats about it i just need to get some $$ together and it should be done soon! It scares the shit out of me lol plus ive had the cops come to my house so yeah not fun...

Got my cooler pipe modified and a new rear seaction made up thanks to my boy micheal MDSfab! If you need any fab in QLD let me know and he will sort you out!

14800068_1229160373770713_2060076998_o.jpg

Last weekend sitting out front of my place

14808748_1229160397104044_1511522285_o.jpg

 

so yeah im aiming for it to be 100% after christmas and get into some Matsuris in 2k17 and what not! Its been a long 3 year build, alot of sweat tears and whatever else lol but its nearly coming to an end lol!

  • Like 1
Link to comment
Share on other sites

  • 3 months later...

Hey mate,

Not sure if you're still keeping up to date with this thread but your R32 and C33s are sick. What happened to the R32? How do you find the C33 compared to the R32 when drifting? And what did you end up doing with the rack in the C33 when the seals blew? I've had about 3 or 4 busted racks in my R32 and I'm sick of it. Always leaking from the seals.

Keep it up.

Link to comment
Share on other sites

  • 2 weeks later...

I keep forgetting about my build thread haha. 

 

Thanks bud! R32 shortened out @ Raleigh matsuri and ecu friend and i decided to sell it to put more money into my C33. Honestly mostly the same, due to body and weight transfer the setups felt similar, i haven't drifted my black laurel yet but my other one felt similar to my 32. Rebuilt the rack! Best thing to do, don't waste your time getting 2nd hack racks haha, didn't cost me much from memory.

 

(Y) 

Link to comment
Share on other sites

  • 1 year later...

Yep 2k18 bump, Build was continued on another forum which is no longer so ima just post some recent info and a quick wrap from 2017 to now, random order too

New paint
More kfs
More wheels
Bought te37sl
Sold te37sl
Both QLD matsuris - Cooler piping issues first one, blew my turbo second one
Rebuilt garrett gtx3076
OG Nismo gauges collecting
Omori gauges collected
Rego
Lower
Custom plates
Did some skid racing
Gold vskf centre caps
Ran the wall at archerfield drift track
Fixed car and paint
New roof spoiler
Non cracked dash
Working lights
New bearings 
New tune with e85!
Alot more money spended
Acquired my old R32 sedan back aswell rightt okay so we've caught up!

So yes i recently did QLD Spring matsuri couple weekends ago, the laurel was a super rush to get done! My old man was flying up from tassie, as i moved up to QLD from tassie 8 years ago and he came up last year and loved drifting. So yes was a massive rush, 1 month prior my tuner said my motor had done bearings, so i had to get bearings done, my panel dmg fixed from running the wall at archy and a quick over to make sure it was all done! I picked up my laurel 7pm Friday night, the following day was matsuri. I didn't go to bed untill 4am prepping small things, cage, lights etc. So heres a few photos;
9.thumb.jpg.e178c85af785bd4586f04ec9645afc3d.jpg
12.thumb.jpg.4807d41170d15cab3bca948fdfa3db96.jpg
22429380_1582109195142494_1609283102_o.thumb.jpg.41fd773210acec85f550751df58ff70d.jpg
1088852443_matsuri20182.thumb.jpg.558d39ce8bec565212af01b19f11b133.jpg
2058643071_matsuri20187.thumb.jpg.9fa1b09ee9017c54c423ebf2abb0aeab.jpg
418339577_matsuri20188.thumb.jpg.95d039b62f68842192b1d5535f581c5a.jpg
268875446_matsuri201810.thumb.jpg.6666a5b73ba4f7b836e1d4362d32f944.jpg
793184756_matsuri2018.thumb.jpg.5b19adaa87b75b8f2a94fa17565cbf4f.jpg

Here's the pic of the damage and the irony of the shirt i was wearing. I basically hadn't done reverse track at archerfield drift track, and i was driving pretty well so i just sent it and was going to quick and yeah was about half a metre away from hitting a concrete barrier and that would of been super shit.
37659039_1886003774753033_7301748504064425984_n.jpg.7deb66d349fae9ab9e18b91ef1d75bca.jpg

I could ramble on but i'm tired and yeah. Laurel ran sweet all weekend at Matsuri which is a first normally something breaks, nothing broke...... it made 475HP on 17 psi too. 

I am currently waiting on some bronze te37 17's to rock up aslong as spare s2 tail lights, Omori gauges and another OG nismo gauge. When i get them all together i'll get some photos, i wanna rock the 90's style of laurel for a bit. I had some ssr forumla mesh lined up off the last laurel i sold but he backed up so i'll find some eventually! 

So yeah that's my laurel thread summed up! I'm going for a drive tomorrow in it hopefully cops leave me alone.

Since i mentioned my R32 sedan, the reason i'm gonna change wheels up on my laurel is my R32 is rocking some rare asf Shadow chrome 17' vskfs and although i love them i don't want 2 cars with kfs haha. I bought it back in February this year, not running etc quiet a steal tbh only reason why i bought it back. I told myself i would't spend any money on it till my laurel is 100% which will be next month when i get my new gauges wired in and some wiring done, but i did buy things for my 32;
Bride brixs
Nardi
Rear seats
Rear interior
Working window regs
AC setup
Dash vent
GTR wing
GTR bonnet lip
S2 tail lights
etc

I'll be hooking into that in the new year, i'ts now running but i'm waiting on some moneys to buy some 1000cc injectors/fpr and 450 in tank pump aswell as new exhuast + hot and side cold and i'll get the e85 tune now. Here's some photos of it. I'll probably just make a thread for that next year away.
44977555_1919657344769089_7121620225665007616_n.thumb.jpg.bcaec0da9928ec952c02153266ec4faa.jpg
44998597_1876748459088801_5146206015653412864_n.thumb.jpg.204731c9a3219c22b5a5d37e7f91780d.jpg
44963691_276357706325110_1237072030038228992_n.thumb.jpg.386db03e9962affb87927ae5cd73b8b5.jpg
43753661_333805674079187_5991108236911050752_n.thumb.jpg.10b3a89ff9293ca6e5d860f8a881a729.jpg
45000711_351137602315243_517524854585425920_n.thumb.jpg.cfacc0ec46432e7bec237e08f9a9cdd5.jpg

Hope you all guys enjoy, laters.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




×
×
  • Create New...