Jump to content
SAU Community

Torana Lx Gtr Hatch, Lots Of Pictures


Recommended Posts

Yes before you all start i know there was no LX GTR but what if i made one but the GTR part was from a different car maker.

Now you're thinking what's this idiot on about, before you read on if you don't like to see torana's modified beyond the norm or skyline being cut

up, look away now.

So the idea is to take a LX hatch and a nissan R32 gtr skyline and mix them together. From the outside it will look like a LX hatch with flares

but underneath it will be the R32 AWD with a rb26/30. I've already run the idea past an engineer who has given the go ahead.

To start with i'm setting the running gear up in an old rusty shell before i start cutting up the hatch.

The R32 GTR shell i'm using for parts.

IMGP1622.jpg


Jig to relocate the rear suspension.

IMGP1654.jpg

Setting up the rear end.

IMGP1695.jpg
IMGP1694.jpg
Check (if you live in usa): Publix Weekly Ad, or Big W toy catalogue.
IMGP1680.jpg
IMGP1690.jpg

  • Like 1
Link to comment
Share on other sites

Started fitting the gear box and trans tunnel, this is the bit that worries me because of the amount of floor that needs to be cut out.


You can see how much needs to be cut out.

IMGP1786.jpg

Fitting the gtr floor, it follows the torana floor fairly closely.

IMGP1799.jpg

IMGP1803.jpg

IMGP1804.jpg

Link to comment
Share on other sites

Shortened the steering column and made up a shaft between the torana steering knuckle and the skyline one.

IMGP1810.jpg

Harvesting more parts. Looking at trying gtr R33 rear subframe instead of the R32.

IMGP1809.jpg

Link to comment
Share on other sites

Rear floor patched to allow the 50x50 angle for the rear subframe mount to sit against the floor and put the subfame in.

IMGP2062.jpg

Looks like i will be able to mount the coilovers on the original shocker mounts without cutting in the wheel arch.

IMGP2065.jpg

IMGP2066.jpg

Rear mounts welded and the rear coilovers sorted, using R32 BC racing coilovers with R33 lower mounts.


IMGP2071.jpg

IMGP2075.jpg

Link to comment
Share on other sites

I will be parting out the gts-4 when I have finished harvesting parts.

Making the fuel tank. Using a holley blue for the llift pump to the 4 litre surge tank then to a bosch 044 pump.

IMGP2069.jpg

IMGP2072.jpg

IMGP2143_resize_zpsef0cae7b.jpg

IMGP2140_resize_zps453224b5.jpg

IMGP2141_resize_zps6c8cbd37.jpg

IMGP2144_resize_zps84f852c0.jpg

IMGP2145_resize_zps0ffc6a4f.jpg

Link to comment
Share on other sites

Pulled the motor and gearbox out of the skyline and took the head off and sat it on the rb30 in the test mule.

Left the twin turbos on but will be running a single.

IMGP2184_resize_zps9c49b75c.jpg

IMGP2178_resize_zpsac7f8404.jpg

Will be using a modified torana brake booster with commodore master cylinder.

IMGP2176_resize_zps03bcd11c.jpg

Link to comment
Share on other sites

Making up the exhaust manifold, used the bracket i made to work out where i was mounting the turbo to make up a jig.

IMGP2224_resize_zps7f83fdbc.jpg

Started making the colector by cutting up 4 peices of 1.5" sch 40 pipe and welding 2 together.

IMGP2228_resize_zpsb0f4bee8.jpg

After they were welded together i cut the peak off and cut out the side so they merge to one point.

IMGP2230_resize_zps495cd82c.jpg

After that they are welded together and while still hot i hammered the sides flat to make more of a rectangular opening.

IMGP2232_resize_zps87ac6ba0.jpg

From there i started planning how i was running the pipes.

IMGP2233_resize_zpsb6c078d3.jpg

IMGP2251_resize_zps2eeff357.jpg

Manifold tacked up.

IMGP2256_resize_zpsb1f9c9ad.jpg

Braking out the runners to weld up each one.

IMGP2266_resize_zps8f346a01.jpg

Manifold welded up but going to change the angle of the turbo flange and need to work out where i'm pitting the wastegate.

IMGP2267_resize_zps9112dc00.jpg

IMGP2269_resize_zps3e02728b.jpg

IMGP2270_resize_zps4947c66f.jpg

IMGP2268_resize_zpsea5ed3b0.jpg

Edited by turbo76lx
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...