Jump to content
SAU Community

Recommended Posts

Car has started making epic squealing noises, and after an initial panic that it was turbo related, it looks like it's now alternator. Hopefully that proves right when I pull the belt off and check, but some basic tests show that it's most likely, and probably explains some battery deaths and other electrical issues.

I couldn't find a part number on here - surely someone has replaced an alternator on an M35? Anyone rebuilt one? Seems like bearings so we're tossing up rebuilding it and replacing the bearings depending on costs etc.

Everything in an alternator search seems to be RB... no VQ love.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/
Share on other sites

Surely Scott isn't the only one that knows.

If 350Z belts are the same as NM35 belts, I guess that means the alternator is probably the same (well, it looks like the VQ35HRs had a different alternator to the VQ35DEs, bu you get my point).

Looks like 350Z units are available out of the US for $150-200, or high amp versions for $200+.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887839
Share on other sites

lol ok. He should have a couple.

Part number for VQ25DD and VQ35DE is 23100-CD010, Amayama have them for $507. Surely a VQ25DET would be the same as those two?

Fortunately it looks like its a standard Mitsubishi part, so bearings are available, part number 2312030R10 and 231200V017, Amayama flog them off for $25 or less per bearing (they want FIVE HUNDRED DORRAH for a complete alternator!).

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887868
Share on other sites

I have one here if you need it mate, otherwise rip it apart and check the bearing numbers, they should be available at the local bearing supplier...

I would be cleaning up the slip rings on a lathe and replacing the brushes if you can find them.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887900
Share on other sites

Cheers mate. Dad's got a lathe so that should be fine. Not sure about brushes, might have to get a sparky to do that bit.

Sounds like there are a few 350Z owners in the states putting higher amperage units in for stereos etc. Not sure if that's worth doing at the same time, but seems like pulling it apart is going to be cheapest, easiest and quickest.

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6887936
Share on other sites

Cheers Cam. First things first I'll rip it off and see if I can rebuild it with new bearings.

Funny thing is P/N 23100-AM610 can be found online from a bunch of places. Only two hits for 23100-AL31A, one being this page.

If it's the same as the V35 and Pathfinder, why wouldn't it be the same as 350Z different p/n, so must be different, maybe higher amperage?

Link to comment
https://www.sau.com.au/forums/topic/426890-m35-alternator/#findComment-6889394
Share on other sites

  • 2 years later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...