Jump to content
SAU Community

Recommended Posts

Just bought a gtst with 90k's on the clock the car is completely immaculate! Not one drip of oil under the good even all the original sticker arnt faded

The guy sold the car with a blown clutch so gonna put in a excedy heavy duty clutch

So my problem is the car is blowing white smoke all the time even when the car is heated up

The car does not over heat I haven't drove the car as its clutch is blown

Sorry if I sound stupid but it's my first car and have no idea if no one has any idea does anyone know a good skyline mechanic in northern suburbs of Melbourne?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/428225-help-1996-gtst/
Share on other sites

White smoke can be oil (will often have a blue tinge to it) or water. Check the water level in the radiator (when cold obviously) and the oil. If the water or oil look like a milkshake then you have a blown head gasket. If the water is fine, but oil is low then you have an oil leak (possibly because of worn piston rings, valves or the turbo is shot).

Either way, your immaculate skyline has a possibly serious issue, other than the blown clutch, which may be pointing towards it having a hard life.

Link to comment
https://www.sau.com.au/forums/topic/428225-help-1996-gtst/#findComment-6918579
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
    • I just quote the Rolling Stones. Paint it black.
×
×
  • Create New...