Jump to content
SAU Community

Master Brake Clynder Leaking "pic Included"

vdub
 Share

Recommended Posts

Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

I hope you don't need to as it's not cheap....

But If you require a fully rebuilt and re-sleeved BMC (BM50 - ABS model for Sumitomo callipers) - PM me

I have one just done in may 2013. I have the invoice as evidence and will give you a good discount on what I paid :/

It has not been fitted and still in box.

Cost for new from Kudos http://www.kudosmotorsports.com/catalog/nissan-brake-master-cylinder-bm50-genuine-nissan-skyline-r32-gtr-rb26dett-sumitomo-calipers-with-abs-p-1166.html

Edited by Sinista32
GTSBoy Grand Master

GTSBoy

Posted
Posted

I think that little hex plug that is wet in your first photo and glubbed up with silicone in your second is just a plug. It might be a set screw for the prop valve, but I haven't actually dismantled one of these myself.

There is a rebuild thread about a LHD Z32 BM44 ( http://www.aus300zx.com/forum/showthread.php?t=311875 ) that shows a dismantled drawing that indicates that the screw in question is a stopper or limiter of some sort and has a seal/gasket under it.

It shouldn't leak. Mine is ever so slightly damp with brake fluid and has been forever, so maybe they have a slight tendency to weep out of there at the best of times. I reckon you can't do much to fix it where it is, so you'd probably be advised to take it off, take it to ABS or similar, and get it rebuilt with a stainless sleeve etc etc. At the very least, a quick visit to a brake shop would be worthwhile to find out if they can deal with it quickly and easily or not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      Shoota's R33 GT-R RB30/26

      By Lithium · Posted

      This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
×
×
  • Create New...