Jump to content
SAU Community

Nissan Altia Front Bumper Where To Find

josh2491

By josh2491,
in Cosmetic, Styling & Respray

 Share

Recommended Posts

darksky34 Mentor

darksky34

Posted
Posted

Looks like an aftermarket replica bar, because in the middle of the white lip (not the black lip that's been added on) a normal Altia bar would be black and have "skyline" imprinted on it, as per this picture.

skyline1.jpg
Camera
E4300
Focal Length
16.3mm
Aperture
f/4
Exposure
1/479.79999999999995s
ISO
100
Camera
E4300
Focal Length
16.3mm
Aperture
f/4
Exposure
1/479.79999999999995s
ISO
100
Camera
E4300
Focal Length
16.3mm
Aperture
f/4
Exposure
1/479.79999999999995s
ISO
100

as far as i can see, the pic you linked doesn't have that, and i've seen some replica Altia bars like that (without the black middle bit + skyline) before. Not to mention, the bar in your pic doesn't have the orange indicators.

  • Like 1
Link to comment
Share on other sites
josh2491 Contributor

josh2491

Posted
  • Author
Posted

hey thanks for the reply yer i asked the guy who owns this car, and he smoothed the Altia and added a BNR34 front lip on it, so i am currently trying to locate a replica or genuine used bar :D

Link to comment
Share on other sites
josh2491 Contributor

josh2491

Posted
  • Author
Posted

no i am in brisbane, so hard right now trying to find this bar. I tried vivagarage but they are out of stock need to wait 8 week, but you know our kind we want it now LOL. :P Slight work that's what he said and a new hole, should be pretty easy i assume LOL

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • portaz
      Walbro 460 in r32 gtr

      By portaz · Posted

      I disconnected before the fuel pump and restriction still there. Disconnected at turbosmart fpr and also after ethanol sensor and pressure dropped. No kinks in line but I found one spot above diff that I can hear the fuel flowing while running so I'm wondering if there is built up corrosion  from 10 years of sitting.  I had injectors cleaned and tested and one was dead but rest were fine. Was never an issue when I owned the car previously but I'll talk to jez about his thoughts on if they should be changed to newer tech. Thx guys at least I know the setup should work again. Pump is wired directly to relay and not using factory plug any  more 
    • robbo_rb180
      R32 Gts+t Daily/street

      By robbo_rb180 · Posted

      Nice work on the shroud/ducting.  
    • ELFGT350
      Newbies

      By ELFGT350 · Posted

      Hi and best of luck with your car. Its a bit hard to tell how low the car is all round from that pic or if its been lowered or not. 90mm is a bit low on the front apron but it depends on the shocks & springs condition & whether or not its been lowered. Going to 19” wheels will give you 15-20mm depending on rubber but you might need new shocks. Mine -2005 are weeping fluid slightly but have lasted 19years!!. So if yours are original they need replacing anyway if they havent been touched before.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Hi everyone, Recently got handed down a 2004 Skyline 350GT Coupe. I would like to change the wheels as the previous owner installed some weird ones. The current ones are 215/45ZR18, unsure of the offset, and sit pretty deep in. Would like to increase the ground clearance slightly as well as I need to get it roadworthy standard, currently sitting at 90mm. Was thinking that maybe I could kill 2 birds with 1 stone by getting new wheels.  Pictures of current wheels: https://imgur.com/bg1QMIu Any recommendations for the types of wheels I should be on the lookout for? Like the maximum and minimum offset, sidewall height, width, etc.  Sorry in advance if I'm noob, I do not know much about cars other than how to change the oil, a blown tyre and brakepads....
    • Lvonn1
      RB25DE Rebuild tolerances

      By Lvonn1 · Posted

      Hey MinKer, Where abouts did you get that table from ? 
×
×
  • Create New...