Jump to content
SAU Community

Stagea Rebirth Thread


spudtatoe
 Share

Recommended Posts

Stagea Rebirth Thread

Hi all,

Probably don't really need to make a whole thread for the build. But I noticed that there were some grey kind of areas when I searched on how to do things. So I'm kind of just going to try and put everything into this one thread.
Keep in mind this is my first car and I had never really worked or touched a car before, so this was all so new to me.

If you do have any questions feel free to ask and i'll try answer them.

First of all,
27th of Jan (Crash day) 

Funnily enough I was doing my restricted license test, needless to say, I failed. 

This was a learning experience for me, so don't crash lol.
Damage wasn't too bad. It could have been so much worse, 

  • Bent subframe
  • Broken control arms
  • Bent in shock
  • Cracked rim
  • Smashed door
  • Smashed in wheel arch

Here are some photos of the crash. 

IMG_3001.thumb.JPG.7d16e4bc963b5a242eda2f7458dc54ee.JPGIMG_2998.thumb.JPG.aa4fa0fba8fad689bd1bf53935a3aeb2.JPGIMG_3019.thumb.JPG.1d12676131030dac7f9609ddca63918b.JPGIMG_3029.thumb.JPG.ee045f0a82aaf29ad51675ce68b4a89d.JPGIMG_3040.thumb.JPG.76ff0b608367f177e895f791913f190f.JPGIMG_3041.thumb.JPG.e77add10d5d6dc8ec1e6540bba8e255d.JPG

1st of Feb
This is where I kind of headed off task a bit and started doing some side jobs that I had listed to do in the future, and since I knew the car wasn't going to be moving for a while (Didn't end up moving for 2 months lol) I pulled off the fenders and front bumper etc, wanted to give all behind there a good wipedown. I managed to strip the last bolt holding on the RH fender so that didn't end up coming off for a fair while. I started trying to drill it out but gave up on that. So I just left it for the time being. 

IMG_3144.thumb.JPG.bbaa6fc0b4225509674eb89355c626fe.JPGIMG_3148.thumb.JPG.782d61bba508412bafcfbde0c4585dbd.JPGIMG_3178.thumb.JPG.6f4c5d3929c9388b74903ca1c290705e.JPGIMG_3179.thumb.JPG.d18710c4df4bd51334794ec6f38ec1ee.JPG

6th of Feb
Picked up the new parts from Liam (cheers bro) 
Got pretty much every part I needed from him, all went into the trusty Hilux. I even sat with the replacement door in the back lol

IMG_3202.thumb.JPG.f0707acb528ada249a752f33dccc80e4.JPGIMG_3205.thumb.JPG.707d7c68a7760c8d16e1136a282f33df.JPGIMG_3208.thumb.JPG.5895cf6b0f10bc7cb4e03011dc50435e.JPG

11th of Feb
A few weeks go by and we've done quite a bit of work I guess, all the old damaged stuff out and swapped over the diff, axels etc into the new subframe. This was a pretty long day and we worked pretty hard. I'm sure if we had done this before it would have been a lot faster.

IMG_3109.thumb.JPG.ee1243b503c4fae0ed771c8b876e50b8.JPGIMG_3110.thumb.JPG.29ee1fe2ea91f6ea354d3d9494f62ab8.JPGIMG_3114.thumb.JPG.73b4a2f4e405a9ed46a329b933607a14.JPGIMG_3119.thumb.JPG.bef7900671df675680901ff3c336941c.JPGIMG_3121.thumb.JPG.028a78c8c3209b9cdb19a1b78c2e84c1.JPGIMG_3242.thumb.JPG.01820b3e6507709f6591b9e8b7e08f4c.JPGIMG_3248.thumb.JPG.6c3b256a80cd5a89f93b06f2d6873eaa.JPGIMG_3253.thumb.JPG.53a308e6744edfb47e628b29d6498591.JPGIMG_3259.thumb.JPG.aa412a90f180a0a368d87c67e8eec4a7.JPGIMG_3261.thumb.JPG.0ef55a0832d7ed10bfcddff8d968d0c9.JPGIMG_3264.thumb.JPG.d64346d1990cde1d834f7d0f12ba067a.JPGIMG_3270.thumb.JPG.7fa8266e4777a1a32022524385ef7a64.JPGIMG_3275.thumb.JPG.d18f288cc66675a0ec4e505e663de734.JPGIMG_3282.thumb.JPG.91c41b41ec27b813046cf1363efac717.JPGIMG_3287.thumb.JPG.56b2787a19fe17dd5fe485a49182ef94.JPGIMG_3289.thumb.JPG.aada1818f6ef811a41733d9aba8ce523.JPGIMG_3299.thumb.JPG.7c943dcf26208309c4ac598a02f2f705.JPG

15th of Feb
Picked up some new V35 'premium' rims for $300, with 2 bold and 2 5mm tread, and a spare tyre with some tread. Decent deal if you ask me. Definitely should put em on this Golf though :P 

IMG_3330.thumb.JPG.97f00c875373a9fcab07ec6ab0e0c7c2.JPGIMG_3468.thumb.JPG.94e0c79bcf4a013eeb9d4910993afc63.JPG

19th of Feb
Bought a pair of vice grips and got that stupid stripped bolt out with ease, so now all the front end panels were off and I gave them a good clean down. This also means I could get off the side skirts. 

IMG_3494.thumb.JPG.b0a15a5c40d8594c7aae4b848ac09294.JPGIMG_3493.thumb.JPG.4dab2bf9dcbee4e6a9e20ae8f480ad9a.JPGIMG_3492.thumb.JPG.dd46726664224ee2cb1d5420e78e0dfa.JPGIMG_3495.thumb.JPG.a97fb26d24a35caa17a13b6edec75c79.JPGIMG_3497.thumb.JPG.75ab42029ce463885e594d19b8757c9e.JPG

25th of Feb
Now I started to sand back the side skirts for repainting as they were pretty shocking, I'd never done any sort of sanding or spray painting before so this was all so new to me. Apparently I sanded it back too far but oh well. I got one of the side skirts plasti dipped (yes, I know, plasti dip isn't really that good haha). Well, It didn't turn out the best, from me dropping my phone on it while it was still wet wasn't the best as that left a huge spot, along with bugs wanting to go and sit on it. I am still yet to paint the second side skirt and am putting it off till I man up lol.

IMG_3584.thumb.JPG.e95579e29b3edb0e5fd05f200ee901ca.JPGIMG_3591.thumb.JPG.ab09259ffe3318eeb0374a52aa1cf2d5.JPGIMG_3615.thumb.JPG.4e3e4520a611b0d03ea7f185ecaaf262.JPG

26th of Feb
We put in the replacement subframe, which was pretty much all we did that day. We had some issues with the new shocks, they didn't have bumpstops or the shock boot. So we went to swap them over onto the new shocks from the old ones but we couldn't get it over a little lip. My uncle took them away to get them sorted. I also test fitted the new wheels, and bloody hell lol.
They didn't sit flush. I sat there googling the specs for the bore and what not, it should all add up! 
So I made a post on the Facebook group (Join that if you haven't haha) and Jez, straight off the bat said to check for rings around the hub or the wheel, I took a look and couldn't see anything

97613F6E-7200-44DA-B783-21FA9982523C.thumb.jpg.98de9f687dc732d8877f090c9b9307b9.jpg687DF0FF-58AB-4EBD-8D15-580C94DE2002.thumb.jpg.8b504fdeb994437b104bda151d1ba6b9.jpg
About a half hour later and posting a close up of the hub someone pointed out that the non rusted ring was probably a spacer thing. Turns out it was. Stupid thing.

IMG_3634.thumb.JPG.d52c90969dd52a64f4bd7c5917fe4fe3.JPGIMG_3637.thumb.JPG.130eee94c17acb7089d029d0e70c5728.JPGIMG_2267.thumb.JPG.b8a1e71e3ff74019c97fb4faf2f316f7.JPG

 

4th March
Another off task thing I did, Stripped out the rear interior and decided I would give cleaning out the spare wheel well a go, as one of the previous owners apparently spilt some fluids in there and they ate away at the sound deadening material, which made the whole area sticky as hell. And everything I did to try and clean all the stickyness off just made it worse. I used like 10 cans of degreaser and yeah, that didn't work. Apparently dry ice works a charm, I tried to find where to get some and bosch sells it, but without being able to drive there that was a no go. I'm a pretty impatient guy so I didn't want to have it shipped lol. I ended up just using a heat gun and scraping it up. Should have just used a heat gun from the beginning because it was super effective, besides my terrible hand eye coordination and me burning my hand which has now left a hefty scar. 

IMG_3711.thumb.JPG.faae3c024c93a6540fbae568906ea8c8.JPGIMG_3714.thumb.JPG.7b9ab0796e21b20f50e2923c5c2a9e3c.JPGIMG_3723.thumb.JPG.07388ea90d185cd02a269cdd4acdfc27.JPGIMG_3724.thumb.JPG.d066e9a042040f8c458a37eaa9e068e4.JPGIMG_3725.thumb.JPG.505c10ffda4ac95c19a2b36d21688c07.JPGIMG_3731.thumb.JPG.b80c987b471d800fa411c61b247971c1.JPGIMG_3732.thumb.JPG.156b39889e1eca924cf631fa528ba516.JPGIMG_3751.thumb.JPG.6b0a2d76935ad7eefc1387e1144c20ac.JPGIMG_3754.thumb.JPG.1c5f1aea2d1542d4ce27abfdaca9e747.JPGIMG_3757.thumb.JPG.19877d1fe33ffa3e6c1a7d6a2a31e47d.JPG

7th March
Camo wrap arrives!!! I always wanted an invisible door. (thats all that happened today lol)

IMG_3780.thumb.JPG.d3e94c748430b1d5ce9b1c0155a25c98.JPG

12th March
Gave the spare wheel well a final clean before I put in the Dynamat. Dynamat edges are pretty sharp as i've learnt, and it does sting when you get cut. So that all went in pretty well, I used the 'Dynamat Extreme Wedge Pack' which is 18x32 in size. It seemed to cover the wheel well pretty good, covered more area than the factory stuff. 

IMG_3845.thumb.JPG.de318cae421d10df23d7cc94c1caac9b.JPGIMG_3848.thumb.JPG.e8a4e4cf2a78eec8cd4c26371f61fefb.JPGIMG_3849.thumb.JPG.c04610be279e81df7d009fa945e74a0b.JPG

18th March
Oh man, we did heaps, got everything back together, got the shocks installed, wheels on, and the car started for the first time in almost 2 months! Bleeding the ATTESA system was probably the hardest thing over all that we did today. I searched high and wide on threads for how to bleed the system, but I couldn't find one for the stagea which was annoying, so we went with what we could, we opened the black nipple and got all the air out of that, then proceeded onto doing the front nipple, we think we bled that one properly. The plug in the drivers side kick panel was weird.
First off with that, my plug didn't have the same colour plug hich confused us but we figured its the only plug that looks like it, so we went with that. We still didn't really know how to make the fluid come out the bleed nipple as when we unplugged the connector the pump started (or a pump) and fluid came out, and we kind of just unplugged and plugged back in quite a few times until it stopped coming out/was just fluid with no air. Not 100% sure if its actually bled lol. Definitely going to be wiring up a switch to that connector as its a pain to get down there. 

14EEBD81-C4CF-4A1D-8EC3-971AE2A10A5E.thumb.jpg.aa0ee5b953fdc1a15edc819cc3f3b700.jpgIMG_3898.thumb.JPG.9c696b4ab2406e931679c6fa7054c4d5.JPGIMG_3904.thumb.JPG.544c51f0fe2f69a54ec3e29d8c35537d.JPGIMG_3763.thumb.JPG.649d82cdfa32eca49d5e08084e90dd33.JPGIMG_3865.thumb.JPG.f9335107bfb759189a1140098d14ea0d.JPG

I then left the next morning at 5am to do a 3 day kayaking trip in Lake Tarawera, so bonus pic!

IMG_3934.thumb.JPG.c77e4259d9f9dc0c4265dc6e5d6f415d.JPG

22/23 of March
So when we put eveything back in on the 18th we forgot to put on the sway bar, so I had to install that, and faarrk. That was hard with the car up on jack stands as the lower control arms were angled downward from the suspension and weight of the wheels, so this made angling it hard. Along with the fact that I left half of the old swaybar bolt on the old subframe control arm. We got the swaybar installed. And I proceeded to put on all the front end panels and lights. I never got around to opening and cleaning the lights which is annoying but oh well, not that hard to take out. 

IMG_3990.thumb.JPG.2c627abcbb81886cc400fd2be406c881.JPGIMG_4009.thumb.JPG.05349faf179ace0465cdc324b57a4dde.JPGIMG_4012.thumb.JPG.c1fc4b827e3f91d834be6d5a3966ddc0.JPGIMG_4014.thumb.JPG.540efb099687c8882756e73f621ad08f.JPGIMG_4021.thumb.JPG.eb425fa63a2e4024734c8dd67c17d115.JPG


So now its up to date, i'll try update this thread when I do more things I guess. I need to take a trip to the tyre shop and get an alignment done as well as balance and change the tyres over to the new wheels. My rear also looks like it has a bit too much toe in. Oh, and I still need to install the camo wrap.

Thanks!

 

7AFF6927-7375-41DA-86C5-B1DF62ACC163.jpg

IMG_3678.JPG

IMG_3623.JPG

IMG_3511.JPG

IMG_3506.JPG

IMG_3243.JPG

IMG_3241.JPG

IMG_3220.JPG

IMG_3216.JPG

IMG_3719.JPG

IMG_3747.JPG

  • Like 4
Link to comment
Share on other sites

This is unreal! 

What caused the crash?

Mad props for getting stuck in, especially as you hadn't worked on a car before. This would be a very satisfying job to do I reckon.

Your rim copped it pretty hard eh? Yikes! The good news is that the V35 rims look freaking awesome and you got a sweet bargain there. 

Are you planning on straightening the sill around the wheel well/door frame? Or just leave it? 

  • Like 1
Link to comment
Share on other sites

No judgement on the crash cause btw. I ask because it looks like you were T-Boned but then the bent rim appears to have concrete grinds on it. 

We've all done dumb stuff. I got the tail out on my old 180SX as I left my work.... Did a 180 (no pun internded) and came to rest against a No Standing sign and the curb. :( Had to sit there while all my colleagues drove past. :( 

  • Like 1
Link to comment
Share on other sites

No judgement on the crash cause btw. I ask because it looks like you were T-Boned but then the bent rim appears to have concrete grinds on it. 
We've all done dumb stuff. I got the tail out on my old 180SX as I left my work.... Did a 180 (no pun internded) and came to rest against a No Standing sign and the curb. [emoji20] Had to sit there while all my colleagues drove past. [emoji20] 


Yeah the rim took a bloody beating haha! Wasn't doing anything stupid either, just pulled out and a car appeared. Thinking it possibly came out of a driveway or something.

I kind of got side swiped but on an angle. I'm planning on beating out the arch, but I got quoted $1200....

Meanwhile the Mazda 6 only had scratches and a cracked headlight....

All 4 of the old wheels had curbing on them. Previous owner(s) managed to do it over time I guess. Not sure how but they did haha.

I'd love to own a 180SX one day but they're so expensive in NZ haha
  • Like 1
Link to comment
Share on other sites

Today was pretty good, got the suspension top hat rubber bits turned 90 degrees so they sat on the spring nicely.

Drilled out the exhaust flange bolt that snapped about 4 months ago and put in a new bolt.

Also chucked some washers on the studs in the flange just after the cat, as repco gave me a stud with the unthreaded middle part of the stud being a different length.

Took it for a test drive and it's awesome, couldn't listen for knocks or odd sounding things as for some reason our hot mix road got replaced with stupid stone shit so now we hear every single bloody car that goes past.

I'm also on the search for some side skirt brackets as mine are all mangled and rusted n shit.

IMG_4049.JPG

Tomorrow I'll try and get a wheel alignment done and maybe the wrap put on.

IMG_4047.JPG
IMG_4054.JPG

  • Like 1
Link to comment
Share on other sites

Oh that's awesome. I didn't realise it was test drive time yet. 
Did you have any issues lining up bolts on the driver's side? Did the subframe go in ok?


Subframe went in perfectly,

We measured just to be sure and everything was equal, mostly the arm brackets took most of the hit.

Putting the subframe went pretty flawlessly thankfully, just the ATTESA bleeding was the long part,

Haven't gone for a decent drive yet, only gone around the block.

I'll see how I go for time tomorrow and hopefully I make my way to the tyre shop. Then when/if I get back from there I'll be taking apart the stupid DE to look at my coils as my misfire is just getting worse. It's like being in an earthquake, it's uncomfortable at all speeds haha

  • Like 1
Link to comment
Share on other sites

On 3/24/2017 at 10:28 AM, spudtatoe said:

The plug in the drivers side kick panel was weird.
First off with that, my plug didn't have the same colour plug hich confused us but we figured its the only plug that looks like it, so we went with that. We still didn't really know how to make the fluid come out the bleed nipple as when we unplugged the connector the pump started (or a pump) and fluid came out, and we kind of just unplugged and plugged back in quite a few times until it stopped coming out/was just fluid with no air. Not 100% sure if its actually bled lol. Definitely going to be wiring up a switch to that connector as its a pain to get down there. 

Switch wired through that plug will come in handy if you want to put it into 2wd.

Lots of good work there! Amazing effort!

  • Like 1
Link to comment
Share on other sites

Switch wired through that plug will come in handy if you want to put it into 2wd.
Lots of good work there! Amazing effort!


Thanks!

It's definitely on the list to do
Link to comment
Share on other sites

Okay today I got wayy more done than I would have expected.

Started off today taking apart the engine to find out what coil(s) are bad. I honestly hate the de neo, they make it so hard to get down there. I'd done this job once before when I changed out my spark plugs, I did this on december the 24th lol. So i've had the misfire for that long! and obviously the spark plugs didn't make any difference, although they did need changing. 

IMG_4072.thumb.JPG.67858f1241edf8aa6835ddd3fef91260.JPG

and i've lost my 12mm socket at some point yesterday so I struggled to get off the intake/throttle bit (honestly no clue what its called lmfao)

Found the culprit, Mr #6, and of course it was the hardest one to get to with it having the metal bit floating there

IMG_4075.thumb.JPG.3f3d1323c12b275707c3f8d2a2bb9198.JPG

Jez mentioned that I should swap coil 5 and 6 around to see if the misfire follows coil #6, because if it stayed on that cylinder i guess it could be the coil harness or something else. 

IMG_4077.thumb.JPG.09de7ba36c1f087374d5e64beafd025a.JPG

IMG_4076.thumb.JPG.2201ade28a740e2b61c022f402d399cc.JPG

I will be collecting some second hand coils with 150,000kms on them for $50 on satuday, was contemplating buying a single Splitfire but thought against it. 

Next job, the camo wrap. I've never done any sort of wrapping before. There are a few bubbles and blemishes here and there, i'm gonna try and use a needle and poke holes in them and use a card to try and get them out. I'm pretty 'wrapped' with how it turned out ;)

IMG_4080.thumb.JPG.36945a8b451b8226d22e60d4b96d1d1f.JPGIMG_4082.thumb.JPG.ceedad383d5de4144342b3110c664179.JPGIMG_4084.thumb.JPG.f8948128e959c8583c18d90979777c3e.JPGIMG_4088.thumb.JPG.c86b015211b90fe4161513b6ef1bb23f.JPGIMG_4091.thumb.JPG.601e7085b10254ab75c4ce540e98c533.JPGIMG_4092.thumb.JPG.1e925302642349a7f41dc7b71f0bd07a.JPGIMG_4095.thumb.JPG.3ce35b8010a4c7e9510a28e9a8ef2054.JPG

 

I'm also going for a wheel alignment and tyre swap etc next saturday:D

Link to comment
Share on other sites

Yo spud, that camo is fully sick, is that gonna be a full wrap or just high lights, I've seen a few camo cars, n I must say put it on the right canvas n wheel set , it looks pretty heeeectic.
Dont ya just love those little bubbles, I hate the bastards, n that was just coverin me books at school let alone me pride n joy. All the best with that mate.

  • Like 1
Link to comment
Share on other sites

7 hours ago, Axi$ 350$ said:

Yo spud, that camo is fully sick, is that gonna be a full wrap or just high lights, I've seen a few camo cars, n I must say put it on the right canvas n wheel set , it looks pretty heeeectic.
Dont ya just love those little bubbles, I hate the bastards, n that was just coverin me books at school let alone me pride n joy. All the best with that mate.

Cheers bro, 

Not too sure about a full wrap for now. I'm pretty keen to find a replacement door, but looking on GTR-Registry tells me that only 774 cars were produced with my colourway (5S5) So that definitely will make it hard to find. Although I'm actually thinking about respraying the car later on in the future, but I would still like a door haha.

Bubbles are a pain in the ass, reminds me exactly of wrapping the books for school haha.

Link to comment
Share on other sites

I love the wrap! Creative way to get around spraying the door. A shit spray job will look a lot worse than a shit wrap application.
Did you use a heat gun on the wrap?


The wrap is definitely different and stands out, don't know if I like that yet haha.

I didn't use a heat gun, I probably should have. But just got a few helping hands to hold the wrap while I use a card and a towel to stick it down, it's a bit rough and I still need to go and pop the bubbles haha
Link to comment
Share on other sites

1 hour ago, PranK said:

Just grab a hair dryer and warm it up when you work with it as it will become more malleable. 

 

Think I should just be able to pop out all the bubbles with a pin :P

Link to comment
Share on other sites

Today I got my faulty coil replaced and had a wheel alignment done.

Too bad my f*kn fuel gauge isn't working now. Can never win.

I feel like it broke when I got a flat battery. Don't wanna buy a new sensor and it be the dash, vice versa.

IMG_0024.JPG

I also got ahold of some brand new carpet for free! No longer have to look at my stained boot

IMG_0027.JPGIMG_0028.JPGIMG_0032.JPGIMG_0033.JPGIMG_0034.JPGIMG_0037.JPGIMG_0038.JPGIMG_0039.JPGIMG_0046.JPG

It's starting to look awesome!

IMG_0047.JPGIMG_0023.JPG

Also is anyone here in Auckland a panel beater? Or knows of a good one that's reasonably priced. Looking at this smashed in arch is driving me bananas

IMG_0025.JPG

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




×
×
  • Create New...