Jump to content
SAU Community

Braking upgrade


Recommended Posts

On 27/06/2017 at 8:01 PM, Adz2332 said:

Think ill try the evo 9 brakes.

Will it work with standard rears? And standard master cylinder etc?

 

Ill send you an email. Sit tight on the evos for a few days. Ive been researching all about them and been in contact with the guy who did the original group buy.  There is a place in usa that does the front kit heaps cheaper.  Since your in adelaide we can combine postage and i might do a group buy.

From what ive been told its suggested that you upgrade master cylinder but a few guys with kit haven't done so....

  • Like 1
Link to comment
Share on other sites

I must be the 1%. I'm a tight arse so I've been using rda 324mm GTR sized rotors. Done about 5 track days so far and about 5k daily duties. On the 3rd set of pads and there is no warping, cracking or anything bad to speak of.

 

 

  • Like 1
Link to comment
Share on other sites

On 7/5/2017 at 10:24 AM, Adz2332 said:

wasnt there a group buy yonks back on RDA?

anyone know who ran it? see if they still have some hook ups

I got my RDA front rotors back in 2008 via the SAU group buy run by member rs73 - he hasn't been on SAU since May 2016.

cheers

Mike

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • I think the pic in the first post is another car, and post 7 is OP's car with standard arms and swaybar swaybar swaybar. I can't tell what brand the silver coilovers are, and even if I could I don't know whether the spring rate is OK, if you can find a brand on the shocks and numbers on the springs that might help. Also, if you can measure the ride height from centre of your wheel to the guard that will help with advice too as handling suffers if ride height is too low
    • sadly, pics no work. that car must have spent a lot of time in a cryo bubble
    • In the first photo you posted, the colour of the control arms are the signature colour for Ikeya. Same for the swaybar, signature colour for Whiteline.  I like Hardrace, they also do hardened rubber bushes if your car is mainly a street car.  I like GKTech as well, but they use a lot of rose joints in their stuff so might not be the best choice for everyone.  The system might have been good back in its day, but it's a prehistoric system now. I suspect that most people have removed the HICAS as they want the car to do what they want to do, not what the car wants to do. From what I also understand, it isn't consistent in it's behaviour on track so it's hard to trust the car/know where its absolute limits are for track use.  Having said that, I think the HICAS eliminator kit was the first thing I installed when I bought my car. I don't personally have any experience with the HICAS system on a race track.  
    • Thanks for the info. Didn’t know I had aftermarket control arms already? Will talk to my garage. What brand would u recommend if I want to play around with my camber more? I would think my camber is around stock level right now or more negative now due to lowering with coilovers. I will be lower her again 1.5 cm to get some more.    also why does everyone like to remove the hicas system? Is it because most don’t work properly anymore or ppl just don’t like them. Mine is functioning as it should be right now.    thanks for the good info 
    • It looks like you've got Ikeya control arms and an aftermarket sway bar, maybe whiteline?  Or am I just going crazy? lol Unfortunately it won't, but what it will do is look really pretty. That's about all unfortunately.  How much neg camber do you currently have? Generally lowing the car dials in quite a bit of neg camber as it is. If you do go down this path, your best bet is get adjustable arms, toe arms (or preferably a good HICAS elimination kit) and traction rods. With all 3 being adjustable, you'll be able to dial out any bump steer that is introduced by playing with the camber settings. 
×
×
  • Create New...