• Welcome to SAU Community

    Welcome to SAU Community, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of SAU Community by signing in or creating an account.

    • Start new topics and reply to others
    • Subscribe to topics and forums to get email updates
    • Get your own profile page, build reputation and make new friends
    • Send personal messages to other members.
    • See fewer ads!

    Consider joining our newsletter for the latest content updates

    Click here to register


Sign in to follow this  
Pr0x1mity

No injector 12v or Pulse?

Recommended Posts

Hey guys!

 

So I pulled out my DE to do a DE+T conversion (Not my first engine swap etc etc) but I've run into a weird issue with the electronics upon putting it back in.

 

First off, ECCS relay was missing - Didn't have consult plug for Nistune

Next the injectors weren't getting 12v, I ran a switched 12v from pin 24/ignition (where it normally comes from). For what ever reason, it doesn't have continuity on the standard line. OK what ever, just run another one and be done with it.

Now it appears the injectors aren't pulsing eiither.

 

Have:

  • Tested another CAS
  • Tested ECU grounds
  • Spark, ECU can see CAS

What should I do next? I'm thinking of cutting out the 12v injector switched line as its probably earthing out - but would this cause the injector driver to not pulse grounds to any of the cylinders?

 

I'd say the whole loom cant be damaged, I can't see any damage and I can't even find where the 12v is broken..

Share this post


Link to post
Share on other sites

What car? And what car did the new engine come out of? (Or are you adding a turbo to your engine?)

Share this post


Link to post
Share on other sites

R34 GT-V Sedan.

 

Engine was from this car. Only thing different is turbo, intake manifold (R33 style with all those bits) and R34 Nistune Ecu.

Just doesn't make sense. I need to test the ECU in another car. next.

Share this post


Link to post
Share on other sites

Are you running different injectors to what you previously had installed ? 

 

Im currently having the same issue but ive rb25 swapped my r32 i have pulse but no fire, need to rewire my injector loom

Share this post


Link to post
Share on other sites

Ecu tested in another car as working. Cas also tested in another car.

Next is to check continuity back to the ECU loom from the injector plugs.

 

Running different injectors yes, but they were in my R33 before hand.

Share this post


Link to post
Share on other sites

With the ignition ON and the CAS removed but still wired into the harness you should hear the injectors firing. Have you done this?

If the Injectors fire during this test the the CAS is not being driven by the shaft.

If the Injectors do not fire and the ECU is fine then there is no connection to the ECU or the +12V.

 

Michael.

Edited by msammut

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this