Jump to content
SAU Community

Recommended Posts

Selling my XXR 527 wheels. These are 18x9.75, offset of +22 and are 5x114.3 (5x100) multi stud. 

I bought these off a member here about a year ago with intentions on putting them on the Stagea owned at the time but ended up selling it before ever putting them on the car.

I believe the previous owner of these wheels didn't put much kms on them as they are in near perfect condition, just a little scratching around the stud holes (as pictured).

These wheels should be a great fit for GTR's and Evo's - Previous owner had these on a r32 GTR.

$880 - Pickup, Shipping can be arranged (wheels are boxed up and ready to go)

IMG-9427.JPG

IMG-9423.JPG

IMG-9430.JPG

IMG-9431.JPG

IMG-9432.JPG

IMG-9424.JPG

IMG-9425.JPG

IMG-9422.JPG

Link to comment
https://www.sau.com.au/forums/topic/472934-xxr-527-wheels-18x975-22-5x1143/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
On 1/14/2018 at 1:04 AM, Robzilla32 said:

Looks great on a GT-R. Price to send to VIC 3006

I'll do shipping for $200, alternatively below are the specs (weight and size) and you can arrange your own shipping quote.

CM 58x58x30

11.5kg per box

Shipped from NSW 2204

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, sort of blurring two different things together, aren't we? I just meant O2 feedback closed loop. I used to have a 0-1V LCD meter on my dash, wired directly to the O2 sensor signal. So you could easily see what it was doing. Normal running it would flick back and forth nicely. Slow down to an idle and it would keep flicking, as the ECU tried to servo to maintain stoich, but it would slow down as each swing happened until it would stay at one end of the scale. As I said above, the sensor heater is not enough to keep it hot enough when there is also little heat in the exhaust flow. Give it a blip and it would start swinging again, then peter out again. Meanwhile, idle speed control would run just fine, because unrelated.
    • It's not even O2 feedback, it's just simply when the ECU sees the closed TPS signal for whatever reason the idle will start steadily dropping until the engine dies. With the TPS adjusted to not trigger closed TPS it will idle at some ridiculously high RPM and something like 6 degrees of timing. In the absence of getting eyes on it personally and a lot of quality time doing diagnostics I couldn't tell you what the real problem was but it was interesting nonetheless
    • Oof. One of my mates has an R34 GT-R that he initially was a "I want to go twins for response and convenience" on his stock 2.6 with Kelford 272 cams, but his friends are pests and were always in his ear about their place being in the bin.   Eventually one of the 2860-5s decided to add it's own input and force his hand, so he conceded and went for a Pulsar 6262G ("G35 900") with T4 0.85 hotside.    Here's an overlay of the results, same cams, same stock bottom end, same boost, same fuel, just from a pretty tidy 2860-5 install to a Pulsar turbo on a 6boost maniifold on BP98.   Worth mentioning here, it may seem like a dead horse thing but the dyno plot doesn't tell the story of how much better it is to drive - transient response has completely changed the car, he used to have flat foot shifting to stop it having to wind up again on gear changes even at >7000rpm... now it builds boost faster than that even short shifting.   It's 100% transformed the car before you even consider how much better it holds on: Pulsar and Garrett aren't the same, but from our experience if you're just looking for a better drive and the ability to make the same or more power I think the divided G30 770 would probably be the smallest I'd go to.
    • Great work Duncan, any events local you will give it a test once all done? 
×
×
  • Create New...