Jump to content
SAU Community

Recommended Posts

Happy new years!

So I'm looking to sell my mostly loved but sometimes neglected 1989 R32 GTR. Just had it serviced and a full mechanics report done, nothing major and nothing outside of all the normal problems, oil leaks so on.

Recently I saw a similar condition car go for what was listed at 23k but not sure, its since gone. But would assume it went for >20k. Anyway. Looking for advice on the best way to sell it, not just for the most money for me, but to the benefit of SAU and the Skyline community who will treasure such a car. Or to not and where to go from here :)

General details:
Bought April? 2011, had 84kkm on it IIRC
109kkm now, was a daily for 3yrs, not used so much the last 4 hence relatively low ~4kkm/yr
Timing/water etc standard stuff done for the 100k service at about 96k IIRC. Bosch alternator with custom loom done then too, as well as all the main oil/water piping (blue in the pictures)
Literal only mods are pods, 4" exhaust, fuel pump (not sure what, not going to open up and see but it sounds Bosch definitely not stock), thermo fan not that that counts :P
Inverted U-shaped crack about the size of tissue box passenger side window at the bottom left, not a RWC issue AFAIK
Scrape/dent from stupid tiny Sydney carparks just forward of back left wheel-well, pizza box sized, quote was about $700 to fix and paint
Overall paint about a 1, few peelings around the place, and generally the last re-paint seems to have been not the best as some bubbles :(

Some pictures as it was 4yrs ago (the 2 dirty ones prior to a clean after a road trip), newer pictures to come but really looking for an experienced member in Sydney (north shore, St Leonards to be exact) to come have a look and advise. Willing to pay for the time for a physical, otherwise starting at least with some onlines advices :)

Cheers guys!

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

7.jpg

268089_148611045216929_6140211_n.jpg

269082_148610741883626_385803_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/473030-89-32-gtr-to-sell-options/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...