Jump to content
SAU Community

Pedestrian Safety System triggered by a possum


Recommended Posts

Hi, last night a possum ran in front of me and smacked the bumper, triggering the Pedestrian Safety System which blew out the bonnet hinges.

I haven't contacted anybody for repairs yet, just wondering what the damage is from this system being activated.  I found some discussions regarding different models of Nissan, which suggest that it destroys the hinges and these need to be replaced.  Is this going to be a costly repair?

2010 370GT coupe, DBA-CKV36

 

Link to comment
Share on other sites

If you have insurance, I suggest using them for repairs. It can be costly and time consuming.

 

I do think someone here may have fixed it themselves once..  It could have been @The Max.. But I'm not to sure. I'm pretty sure the person had a white v36 pic.

 

There's a thread explaining it. 

Link to comment
Share on other sites

If you're going through the insurance, then for the bonnet pop-up issue in itself (I'm not factoring in damaged bumper, grille, bonnet, etc) that repair will entail:
1) Replacement rams (single use items)
2) Replacement hinges (single use items)
3) Replacement Bonnet Pop-Up control module (single use item living in the boot)

Now, for the third item, if they can't source a replacement, the EEPROM in the module can be cleared with an appropriate EEPROM programmer, which will extinguish the otherwise permanent display of the pop-up indicator light on your dash. I've explained in the thread how that's done. There is a process for clearing the pop-up indicator when it's in error but in my case, it was a legitimate hit from a motorcyclist thinking he was Casey Stoner, so the only way was with the EEPROM programmer.

While we're on the topic, does anyone know if there's a spacer or shim sandwiched between the hinge and bonnet? Mine is sunken by a couple of mm below the edge of the front guard near the windscreen and looking at the two hinges, I see that the driver's side has something like a little bit of sheet metal wedged in there while the other doesn't. I might have to fashion up one for the passenger side to sort that out. Yes, I'm a meticulous twat.

Link to comment
Share on other sites

  • 7 months later...

Sorry, I didn't post a follow-up after I had it fixed.  The parts came to $6500, and took 4 months to get here by boat, as COVID-19 disrupted direct freight.  No idea what the labor costs were to get it all installed.  Yay for good insurance.

I get very nervous now when I see a possum or rabbit on the road.  Gonna have to investigate disabling that mechanism I think.

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • swaybar swaybar swaybar swaybar swaybar anyway OP, what is currently in your car, are they factory shocks and sway bar? Any sign anything else has been changed under there over the years? And as Murray said....what are effect you looking to change
    • Congratulations on your find  Did you mean it has 6k miles or was that a typo? Firstly, keep in mind some movement of the shifter is normal...it is a long rod hanging out of a box bolted to the engine. Having said that there are 2 next places to look: 1. Transmission and engine mounts. If these are worn or broken the shifter will move around more. They are reasonably easy to source and replace on a hoist, and possible but uncomfortable to replace car stands 2. On the bottom of the shifter there is a nylon cup that sits over shifter's ball end. If this is worn or broken the shifter will move around more than it should (but will still shift OK). That is a cheap part and requires removal of centre console, rubber shifter hole covers and a circlip in the gearbox shifter hole to remove the shifter. Re maintenance, as with any new import you should change all the fluids including transmission when you get it; never trust the seller and previous owners to have done the right thing. I am pretty sure R34 GTT is the same as earlier big box transmissions, so use any good quality GL4 75w90 trans fluid if it is shifting well (if it is hard to shift due to synchro wear, redline shockproof lightweight will keep it alive a bit longer before rebuild is required)
    • Well considering I have the exact same problem with that as the original one I don't think that the ignitor is the problem. I would imagine that this being such an uncommon problem the possibility of getting a new ignitor that is bad in the same way as the old one has to be very slim. I'll definitely pull everything apart this weekend and check the turbo out. Got quite a bit of things to check out Saturday like fuel pressure and the pcv so I'll report back once I do that.  Thanks everyone for all the replies this is all really helpful  
    • Rb's have issues with bottom end starvation, not head starvation. Which either way, you probably wouldn't ever see on a dyno. Strange... What's pump gas for you? Octane rating?
×
×
  • Create New...