Jump to content
SAU Community
  • Welcome to SAU Community

    Welcome to SAU Community, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of SAU Community by signing in or creating an account.

    • Start new topics and reply to others
    • Subscribe to topics and forums to get email updates
    • Get your own profile page, build reputation and make new friends
    • Send personal messages to other members.
    • See fewer ads!

    Consider joining our newsletter for the latest content updates

    Click here to register


YE34AH

R34 GT NA - RB26 swap

Recommended Posts

Posted (edited)

Hi,

Currently I have a  rb26dett swapped in my R34 GT NA 

And can't get my head around the wiring side. 

Has anyone done this swap successfully I term's of everything working in the car ? 

Yes it has the sumitomo brakes, rb25 big box etc. 

I also have a rb26dett moded to r34 gtt loom but I have been searching and noticed that there are many differences between r34 gt - gtt and the white plug that runs off the main loom to inside the passenger foot area where the ecu is mounted 

Cheers 🤔

 

Edited by YE34AH
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Topics

  • Latest Posts

    • I also think it would be wrong to say that RB's are weak or inherently flawed. Their oil control issues and block strength aren't a design flaw, they did exactly what they were designed to do when being used for what they were designed to do. Really it's the fact that they are quite a solid base that we are discovering their limits, because people are trying to push them to 600-700-800+ horsepower. Go and try that with a Toyota 2ZZ, the crank starts walking around at 500hp and you can't stop it. There's plenty of motors that legitimately can't handle it at all, the RBs sort of can but you're asking a lot of them.   At the end of the day, there's just no guarantees either way. You might build a 600hp engine and have it last 15 years, it might last 2 months - there's no way to guarantee it. So you're playing an odds game, you're rolling the dice. And if you aren't comfortable rolling the dice with the amount of money that it costs to play the game, then the best advice anyone can give is to not do it. Don't go to the casino and put all your money on Red if it will hurt too much when you land on Black.   Just ask Laine@bcozican, he's the sort of man that stands with his back to the table and barely even checks what colour the last throw landed on before rolling again 🤣🤣🤣❤
    • Nismo R35 GT3 Brembo Racing Caliper 2 sets front calipers, new and unused Suit high performance modification to any GTR Skyline with limited modifications for adaptors etc. Perfect application for 'Time Attack' build Item location is UK, worldwide shipping available and as part of purchase cost. Price for 1 x pair ( LHF + RHF ) GPB£3250 - AUS$5850 Happy to discuss further with technical support, information and pictures +447552494484
    • Ahh I see, I thought you were saying you were going back to a 2.6L. Just misunderstood what you meant by based.    Carry on then!
    • But the simple way is just go to the R33 GTS page at GTRRegistry and all the details same as FAST are there.
    • This is the factory procedure; 13.Crank Pulley A: REMOVAL 1) Remove the V-belts. <Ref. to ME(H4SO)-36, REMOVAL, V-belt.> 2) Remove the crank pulley bolt. To lock the crankshaft, use Shop Tool 499977100 CRANK PULLEY WRENCH 3) Remove the crank pulley.   B: INSTALLATION 1) Install the crank pulley. 2) Install the pulley bolt. To lock the crankshaft, use Shop Tool 499977100 CRANK PULLEY WRENCH (1) Clean the crankshaft thread using compressed air. (2) Apply engine oil to the crank pulley bolt seat and thread. (3) Tighten the bolts temporarily with tightening torque of 44 N·m  or   33 ft-lb). (4) Tighten the crank pulley bolts. Tightening torque: 180 N·m   or  132.8 ft-lb)   3) Check that the tightening angle of the clamp pulley bolt is a minimum of 65°,  Perform the following procedures when less than 65°. (1) Replace the crank pulley bolts and clean them. Crank pulley bolt: 12369AA011 (2) Clean the crankshaft thread using compressed air. (3) Apply engine oil to the crank pulley bolt seat and thread. (4) Tighten the bolts temporarily with a tightening torque of 44 N·m (4.5 kgf-m, 33 ft-lb). (5) Tighten the crank pulley bolt an additional 65° to 75°.  
×
×
  • Create New...