Jump to content
SAU Community
  • Welcome to SAU Community

    Welcome to SAU Community, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of SAU Community by signing in or creating an account.

    • Start new topics and reply to others
    • Subscribe to topics and forums to get email updates
    • Get your own profile page, build reputation and make new friends
    • Send personal messages to other members.
    • See fewer ads!

    Consider joining our newsletter for the latest content updates

    Click here to register


Phillip Island Track day inc Come & Try July 3rd


acsplit
 Share

Recommended Posts

When : 03 July 2021

LocationPhillip Island Grand Prix Circuit

Pricing:
Affiliate Discount – $245.00  Affiliate Code: 8DN69YDB
Come & Try – $230.00

COME AND TRY GROUP - $230 - MAX 20 ENTRIES - INCLUDES MOTORSPORT AUSTRALIA LICENSE FEE

The WRX Club will be running a single come and try group at this event aimed at introducing new members to Motorsport. The come and try component is untimed, and only valid for those that do not currently hold a L2S license or haven't purchased a Level 1 come and try license in the past twelve months.

Motorsport Australia Level 1 Come and Try Licenses are included in the cost of the come and try group entry fee ($205 base fee + $25 license)

Due to the single group nature of this event, two come and try drivers can not share the same vehicle 

Full event details and sign up at the link below.

  • Like 2
Link to comment
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Did you also buy your car from Trust Kikaku?
    • Pretty much this ^ We run a 2000 and 2500 Elite in the R32s, they're mounted under the glovebox on an aluminium plate. We attach a piece of angle on the front side to pick up the 2 glovebox hinge bolts and a small 90 deg bracket on the rear which picks up a rear bolt, using 4mm nutserts as captive threads for the ECU fixing. Mounted like this has enough room for the plug and play harness to come out of the ECU, go over the kick panel and screw into your existing factory ECU harness. I've seen the kits that pick up the same points, which cost like $150+, but it only mounts the ECU ! You are better off mounting it on a made up plate as you can also mount your wideband controller to it too as we have done. For reference this is in the white 32: Definitely better off to make your own.  
    • The pressure should drop. Maybe not instantly, but it should. It doesn't just hold the pressure indefinitely when the engine is off and the fuel is not pumping. If it did, there would be no need to prime the fuel system... ever. If the pressure is dropping or being too high (or really, fluctuating) while the engine is running then there's an issue with the FPR. If you have two sets of stock injectors, and two stock FPR's and two fuel rails, I wouldn't be chasing the fuel side of the engine bay at this point for your problem. Personally I'd be re-checking that MAF (is it the same auto/manual/is it clean? did you actively clean it with MAF cleaner?) Alternatively, anything else custom in that circuit? You have spark, but do you know you have spark at the right time?. You've set timing to 15deg, but have you checked it with a timing light? Could it be out? Whats your CAS doing?
    • I had access to spare rail which included the injectors and FPR. That way if the issue was relating to a leaking injector or FPR issue it would be sorted.  However the fuel pressure it still not holding. iv changed the FPR as well and no luck.   note: old fuel rail setup has Since been reverted back We know that there is definitely a fuel pressure leak. fuel leak down test = failed (pressure drops instantly) The question is where is the leak occurring.. possible causes injectors = no leak from any while priming FPR = tried to pitch the short hose on the FPR while pump was priming and the pressure shot up to 100psi but after pumped stopped went back down to 0 In saying that iv tried another FPR with the same result. Either the 2 FPRs I have are faulty or something else is causing the Pressure drop.   Fuel tank lock ring  One other observation is that The lock ring where the fuel pump goes in the boot is split. fuel pressure might be escaping from there.     I’ll replace this first and see if that changes anything.  
×
×
  • Create New...