Jump to content
SAU Community
  • Welcome to SAU Community

    Welcome to SAU Community, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of SAU Community by signing in or creating an account.

    • Start new topics and reply to others
    • Subscribe to topics and forums to get email updates
    • Get your own profile page, build reputation and make new friends
    • Send personal messages to other members.
    • See fewer ads!

    Consider joining our newsletter for the latest content updates

    Click here to register


denisgtr

R33 GTR mushy brakes

Recommended Posts

Hi all,

So ive deleted the abs off my r33 gtr whilst still using the factory brembos with hfm bm57 brake master cylinder (apparently little better than factory), The brakes before the abs delete were fine and were pulling up well but after deleting abs with nothing else adjusted the pedal got soft and doesn't pull up as good, with first roughly 50% depressing the brake pedal theres no braking what so ever and when brakes do start the pull up its very weak.

so far what ive done:

- new discs and pads

- brake bleed (several times)

- brand new slave cylinder

- braided lines

only thing i can think of i can do is adjust brake pedal rod from the booster.

has anyone had this sort of problem? and im i missing something?

also best way to adjust brake pedal cant seem to find the right info anywhere.

sorry if i worded my problem poorly.

Link to post
Share on other sites

I bought the same HFM BM57 copy master cylinder and my rear brakes didn't work (reverted back to standard BM50).

So yeah, see if you can put the standard master cylinder back on and test.

Link to post
Share on other sites

Also can tap the 2nd port for the fronts and it works fine as I have done it a few times.

Have tried using a HFM one in the past and could never get it working like a genuine Master Cylinder 2 brake shops had a go with adjusting rods and the pedal.

 

Link to post
Share on other sites

Have you looked into your brake booster? The unit is a diaphragm and could have a pin hole in it that could cause headaches. 

Just chiming in on my experience with my 32, I was chasing a similar problem for months. Car has Ferrari f40 Brembo's. Bled countless times, Bench bled the BMC, Replaced BMC twice finally using the  hfm bmf57 as well. Adjusted the pedal. Nothing. was borderline dangerous how spongy it was. 

Check the vacuum lines on the booster.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




  • Latest Posts

    • I forgot I did jump it with a 200 amp battery charger before I got a new battery. Is there wires that might have fried or like a immobilizer that could be causing the issue?
    • could cause lean. almost never fail in any meaningful way. My 25DET Neo will cruise at ~400°, pre-turbo. Literally in the turbine inlet. Max load is ~900°C.
    • Thanks for your reply  So for you it's not related to the fuel pump and fuel regulator  What temps should I see on the highway idling at 3k in 6th gear ?  So maybe the CAS is wrongly set, I will remove some advance to see thanks 
    • Hi SAU Team My son and I inherited a very unloved 2002 V35 with a VQ30D. Unfortunately there was a snapped rod in piston one and after stripping it down today the only good parts left are bolt on accessories crank and heads + 5 remaining pistons. Awesome hole in the side of the block. We just picked up a VQ35DE for a couple bucks that has 2 snapped rods but otherwise bottom and top end are good for rebuild but no harness or ecu. While i continue trawling thru the threads here i was wondering if anyone has tried any stoking or de-stroking VQ engines with DD/DE combos and had any experience with the direct injection systems?   Were not specifically building it for performance or throwing a spooly boy on it but rather the challenge:      
    • Hi All. Id like to introduce the project my son and i are building which is a V35. Ive built quite a few A,L,N and SRs over the years and we found a cheap V35 with 6 pots and decided to have a bit of fun with it. Look forward to learning from the knowledge base here and  hope to contribute where we can.  
×
×
  • Create New...