Jump to content
SAU Community
  • Welcome to SAU Community

    Welcome to SAU Community, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of SAU Community by signing in or creating an account.

    • Start new topics and reply to others
    • Subscribe to topics and forums to get email updates
    • Get your own profile page, build reputation and make new friends
    • Send personal messages to other members.
    • See fewer ads!

    Consider joining our newsletter for the latest content updates

    Click here to register


nsw/act  M35 bits and pieces


Recommended Posts

Garage clearout of vq25 parts left over from engine swap.

Please make an offer on the following parts if you are interested. 

Power steering pump

Alternator 

A/C condensor

Stock injectors with rail and harness

Various sensors

Stock engine ecu and auto ecu and bcm

Front diff

Belt tensioners

Radiator hoses

Torque converter and flex plate

Brand new set of springs for bc coilovers

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Nope, my car is from global auto
    • Bike is back drom Sy's and it runs like a boss There was a new update for the Maximus tuner and then some road testing, it pulls like a train from idle I was assuming I was going to lose some power down low from the short shots exhaust, which I wasn't to fussed about, #becausenotaracebike, but in reality it makes noticeably more power everywhere, which is nice I also attempted a better job on the wrinkle paint for the air filter cover, it's better, but has 2 small blemishes from a little spatter from the nozzle on the spray can, meh, good enough, because of its shape, trying to get a even heavy coat, without any runs, that gets some heatgun action to wrinkle up, is tricky (the oven is off limits due to Jackie working from home, damnit...) The black alloy ebay mesh is on the way for the opening, I'm looking at using a very thin bead of black stikaflex to hold the mesh on Also, if anyone has a T400 laying around can I have it, please, cheap would be good, free would be better...I want to take my time and attempt to build a stout auto that can handle #moreboost, the current power has the "fully built" 4L60e at its "comfortable" max limit Fun little job for the car tomorrow, chuck this on and do 5k km service, it's a new design, as in, the hole in the thing is much bigger than the older ones I've used before
    • Did you also buy your car from Trust Kikaku?
    • Pretty much this ^ We run a 2000 and 2500 Elite in the R32s, they're mounted under the glovebox on an aluminium plate. We attach a piece of angle on the front side to pick up the 2 glovebox hinge bolts and a small 90 deg bracket on the rear which picks up a rear bolt, using 4mm nutserts as captive threads for the ECU fixing. Mounted like this has enough room for the plug and play harness to come out of the ECU, go over the kick panel and screw into your existing factory ECU harness. I've seen the kits that pick up the same points, which cost like $150+, but it only mounts the ECU ! You are better off mounting it on a made up plate as you can also mount your wideband controller to it too as we have done. For reference this is in the white 32: Definitely better off to make your own.  
×
×
  • Create New...