Jump to content
SAU Community

Recommended Posts

Gday,

I have a mechanical diff of some sort and the oil has never been changed from Japan. I've been told you need to know the grade of oil that goes in.

I have no idea how to find this out other than hoping that there are markings on the diff somewhere that identify it.

Are there really grades of diff oils based on brands or will a certain grade of oil fit any mechanical?

Being diff, the first criteria is that the oil must be rated as API GL5. Secondly, being a mechanical diff, the fluid must be friction modified in order for the clutch packs to lock up properly without shudder etc. So the oil must say on the bottle it is suitable for mechanical differential applications. If it doesnt, don't use it. (for stock viscous coupling units, this is NOT an issue) For example, Motul Gear 300, Redline 75w90 NS and Castrol MTX are GL5 oils, but not diff oils. Castrol Syntrax, Redline 75W90 and Motul PA 90 on the other hand re. So take a look around at the performnce shops

Ahh thanks!!

And as long as it's for a mech diff it's all the same so any of those should be ok?

And I should be using Castrol Syntrax, Redline 75W90 and Motul PA 90 for the aftermarket mechanical diff?

Also how many litres do you usually need?

Yo man, Redline MT90 is a GL4 gearbox oil, not a diff oil! Hehe but Redline 75W90 Gear oil is the same price.

If I were you, i'd go for the Motul PA 90 or Castrol SAF-XA which is a full synthetic. (Sorry I said Syntrax before, thats not a diff oil, but a gearbox and non LSD diff oil). You can easily find SAF-XA in any auto store or Big W (its in a silver bottle). Alternatively you can use Castrol LSX 90 which is a mineral version of SAF-XA (white bottle).

Ahh thanks. Oops didn't realise it's gearbox oil haha I have found my gearbox oil atleast!

Thanks for that I will go for the motul PA90 - it's cheaper anyway and the redline they said I will need to bring my own container cos they dont have bottles of it.

How many litres will I need you think?

err thats meant to read "UAS said for the redline I'll have to bring my own container".

The guy said they only use it in the workshop and not sell it but happy to sell from the drum (or whatever) they got if I bring my own container.

Sweet I'll just get 1 bottle then. Is it worth cycling diff oil or no? I know it hasn't been changed for a very VERY long time and it's been (ab)used for a very VERY long/hard time :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...