Jump to content
SAU Community

Recommended Posts

I've been offered a beautiful set of wheels and tyres at an unbeleivable price, but they couldn't supply the 18" package so offered me the 19"s at the same price. Is this a good idea as my suspension is pretty tight as it is. What are replacement tyres worth??

Any help appreciated.

Dave

Link to comment
https://www.sau.com.au/forums/topic/73500-19-wheels-good-or-bad/
Share on other sites

keep looken dave IMHO 19" look the goods but if your cars a daily driver forget it, not worth the hassels.

If the 19" do turn the ride right off, you are going to be stuck with them for a little while untill you can unload them & get some smaller wheels.

What size tyre are they going to give u in the package? I can do some checking & find out what a middle of the range set of performance tyres is worth, if you like????

Just PM me if so & I could also get you a better deal on wheels & tyres

Cheers Mike

I've had 19's for at least 2yrs now, and i found them to be pretty much hassle free. Basically, the rolling diametre is only 1" bigger than the 18" rims, thus the 19" rims have the same amount of rubber as the 18" rim. What i have discovered though, is that you use more fuel with the 19", about 50km less per tank. I would also only use; f:235 and R:255, depending on your rim width.

Go for it! I've had 19's for about a year and i haven't had any dramas and mines a daily driver, and as for the fuel mine is the same as it was with 17's! Hankooks 265 35 19's will set you back anywhere from 310 - 450 depending on if you can get a good deal or not. Stop stalling and get them now, not only will it look the goods you'll love them 2!

how could u use more fuel for having bigger rims? :    how does that work out..
Simple physics. Larger rolling diameter requires more force to start/stop rolling. Force=Power=More Fuel Consumption. And we haven't yet considered the extra unsprung weight of the rims and tyres. Personally I really couldn't give a f*** about fuel consumption, just thought I would advise you. I've never looked back!
Usually in a skyline you tend to go through a set of rears in about 12 months.. $800 every 12 months for 19" tyres? Kind of expensive habbit...
Well if you intend to burn your rubber, i suggest you stick with 17's. Also you could pick up a great set of 19", Hankook silica Ventus tyres, for about $290-$330 each tyre.

Most fuel is generally consumed when taking off. Also 19's are generally heavier, so more fuel is used. This is based on my experience from the last 2.5yrs and also my mate's report after using them for 2 months (my car was off the road).

Yes which would mean it would show that less km's were done per tank.
You point may be valid, but with my std rims, my speedo was was out, when i first put on my 19" i had a speed check done on a dyno from 50-120km/h, @ 10km/h intervals, and found my speedo had become more accurate.

ie: When the speedo showed 70 i was actually doing 69 and when the speedo showed 110 the dyno read 108. Needless to say i was pleased with the result :D.

Guy & Girls a word of wise to you

Becareful who u get to fit your wheels as some tyre & mechanical places are only there to sell you the wheel & will not tell you what "IS BEST".:stupid:

The tyre can have the right size on the side wall but @ the same time you also need to know the over all rolling size of the tyre. (different brands have different rolling size belive it or not, same size i.e. 245/40/18 but roll area is not)

Every inch you go up in rim size you MUST bring the tyre size down that much most people will know, also all you guys out there running around with 19" wheels what ever you do stay away from DOT's the catch you with the 19"'s on your line & they feel like being picky they will get you for it to be legal the rim can only be 2" larger than factory fitted so stocks are 16" so the biggest you can go & still be legal is 18" :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • Not ready yet, but maybe later in the year?
×
×
  • Create New...