Jump to content
SAU Community

Recommended Posts

why wouldn't you weld a diff in a r32?   best mod i ever did!!! (not to mention cheapest)

1. they brake when doin ringies, then its time for a new diff.

2. its just unsafe drivin in the hills when its wet wif a locker,or any where at a speed higher than about 60.

3.there not legal.

4.why not just get an lsd,they dont brake,there safer and there legal

my 2 cents

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493562
Share on other sites

1. they brake when doin ringies, then its time for a new diff.

2. its just unsafe drivin in the hills when its wet wif a locker,or any where at a speed higher than about 60.

3.there not legal.

4.why not just get an lsd,they dont brake,there safer and there legal

my 2 cents

Compaired to a $1500 2 way? I dont mean to sound rude, but a locked diff is a locked diff, it doesnt matter how fancy the diff is, or whats in it. If its locked its that simple.

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493609
Share on other sites

1. they brake when doin ringies, then its time for a new diff.

2. its just unsafe drivin in the hills when its wet wif a locker,or any where at a speed higher than about 60.

3.there not legal.

4.why not just get an lsd,they dont brake,there safer and there legal

my 2 cents

1. LSD's need an overhaul from time to time (re-shim) adds more cost. A welded diff will need to be replaced. I've been drifting with my diff 3 nights a week for about 4-5 months now and it's holding up to the challenge no probs!

2. 2-way is just as safe/unsafe as it does the same thing!

3. 2-ways are also not legal!

4. 2-ways cost more, and require servicing/reshim's

Have you driven with a locked diff before? have you driven with a good 2-way?

a 2 way in good condition is just the same as welded, (however it will unlock with the clutch in).

imo, they are perfectly safe, people have this misconception that as soon as you go around a corner in the wet, you'll loose control.

This is not true, you just have to be a bit wary of how the car will react. A locked diff is far more predictable than a viscous lsd or an open wheeler, and if i was in the situation where i lost control in the wet, i'd rather have the confidence you get with a locker that i can put the power down all the time!

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493724
Share on other sites

If the diff is locked (welded), then it's locked. It will be a piglet to park the car. It will skip the inside tyre when doing U-turns. It will be a bigger piglet if you have to push the car around a corner.

A LSD is only "locked" when it needs to be, and that is usually only when the centre senses a loss of traction in 1 wheel and transfers drive to the opposite wheel.

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493822
Share on other sites

say for someone who is looking at doing track work (i.e. not drifting, but actually racing against cars/clocks etc) what would be the best sort of diff? 1 way LSD? or 1.5 way?

The way i see it, is if you're doing circuit work, you don't want the diff to be locked when you back off the throttle, otherwise its going to lift-off oversteer easier, or push understeer if you're already in the corner and it can't break traction, therefore, i would think that the 1 way would be best (for circuit anyway)?

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493934
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...