Jump to content
SAU Community

Recommended Posts

Hey guys,

need stock rims and exhaust for wednesday this week

willing to pay as i need to get this thing through and dont want the hassles.

its an r33 gtst

any help would be greatly appreciated.

you can contact me directly on 0404 092 041

luke

Hi WWWDOT,

I have a stock dump pipe, downpipe and cat all ready for immediate pickup. Not sure if you need all of them, let me know. I'm in the North East Suburbs.

thanks guys.

as i dont have much of a clue about whats legal etc, i went to import spares, and they are replaciong the parts for me for a few hundred dollars.

they have all the stock stuff, so they're replacing turbo, exhaust, wheels, bushes etc.

only thing he said is that my intercooler piping cuts through the chasis, but its nothing structural, and the engine is polished.

thankyou but all sorted.

i pulled out the turbo timer and the SAFc and then went to start it and its out of tune i reckon.

once it goes back in who should i get to tune the car?

does anyone know what the orange/blue wire out of the computer is for?

the safc plugged a female and male into it but im scared to plug them back together.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...