Jump to content
SAU Community

Sau Timeslip Registry


BU5TER

Recommended Posts

15inch 255/60 ET Streets.

I was taking it easy, I trapped only 133mph at Motive Drag Battle but I know the car is faster. I just to took it out to crack 140mph.

Runs were:

11.6 139mph

11.5 141mph

11.4 144mph

All were 2.3/4 60's.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • 1 year later...

SETUP:

255 17" Hankook RS3

93 octane pumpgas (US = to RON98)

2.75L BC stroker

Ported head

Tomei poncam A

SS valves

Hypertune V2

BW 8374EFR IWG .92 divided

6 boost divided manifold

Nismo front LSD stock rear.

3176 lbs without me in it

 

NEW DATA:

93 octane (US) pumpgas (contains up to 10% ethanol)

60' = 1.772

330 = 4.837

1/8 mile = 7.363 @ 99.14

1/4 mile = 11.288 @ 126.26

 

 

 

OLDER DATA:

19 psi (20/sept/2016

Run 2 temp 72 degF

1.695 60'

[email protected] 1/8 mile

11.19@ 121.7 1/4 mile

 

 

 

 

 

Link to comment
Share on other sites

  • 3 months later...
  • 2 weeks later...

R33 gtst spec 2 auto.

hks mushroom intake

splitfire coilpacks

divorced wastegate turbo elbow

3" down pipe, de cat and cat back

gizmo ms ibc set to 1.03 bar

apexi safc-2 

r32 gtst trust uprated side mount intercooler

mv auto's stage two quick shift kit with large mocal trans cooler

mapped at 296hp @ the fly but told by my tuner to get an emanage gold.

Toyo proxes r888's 255/50/16 on standard rims (23 psi in the rears)

tein springs

no nitros 

Car seems to bog at the end of the strip suspected heat soak on my intercooler.

IMG_0617.JPG

IMG_0618.JPG

Edited by paulzy123
Forgot something
Link to comment
Share on other sites

  • 4 months later...

R32 GTR

Forged 2.6L

Garret -5's

HKS F-Con V

Tomei Cams Type B (Pon)

All the normal stuff - dump pipes/exhaust etc.

Suspected Leaking BOV as I can here something leaking.

11.9 @ 116mph with me hitting the rev limiter in 2nd (oops).

Time to replace BOV and run again!

 

 

 

 

 

Link to comment
Share on other sites

17 hours ago, Stixbnr32 said:

R32 GTR

Forged 2.6L

Garret -5's

HKS F-Con V

Tomei Cams Type B (Pon)

All the normal stuff - dump pipes/exhaust etc.

Suspected Leaking BOV as I can here something leaking.

11.9 @ 116mph with me hitting the rev limiter in 2nd (oops).

Time to replace BOV and run again!

 

 

 

 

 

What boost level and fuel?

 

Link to comment
Share on other sites

On ‎7‎/‎03‎/‎2017 at 8:55 AM, HarrisRacing said:

What boost level and fuel?

 

BP 98 and 21 PSI was 373KW atw.  But I can hear a leak so not sure what it was at the time - I think it is my BOV so looking to replace and run up on dyno again to make sure all is well.

Link to comment
Share on other sites

R33 GTST s2
ET:13.9
MPH:105
60':2.4 shocking start only got one run rained out
FUEL: caltex vortex 98
TYRES: triangle 235/45/17 very hard
Power: 210kw 16psi small mtq highflow turbo
Going back in afew weeks to better my et and 60ft
Fix std bov bleeding off over 1bar and upping to 18psi boost
Also gonna put on some mickey thompson et streets 255/50/16 i got on 300zx stockies

Link to comment
Share on other sites

  • 5 months later...

R33 GTST s2
Stock turbo
Stock ECU
Full 3 inch exhaust
FMIC
35 shot nitrous
Boostcontroller set to 10 psi
MT ET Streets 255/50/16

KoqKSk4.jpg

Edited by iTzTMG
Link to comment
Share on other sites

  • 3 months later...
  • 4 weeks later...

Z32 300ZX

1590kg race weight

E85

 

Stock turbos

Restrictive exhaust and intake setup

1000cc injectors

R32 GTR 4.11 diff

Intercoolers

Nistune

Blown rear shocks causing extreme tramp.

ET streets 255/60/15

300rwkw @ 15psi on unigroup dyno.

 

12.4 @ 116mph, 2.1 60ft.

 

Have coilovers in the rear now and a wizards of nos sb150i2 nitrous kit fitted so will go back to crack an 11.

 

 

 

 

Link to comment
Share on other sites

  • 1 month later...
  • 3 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • New R34 owned here (from the US) and found a gem, '98 GTT with ~6k miles, super clean & completely stock. When shifting there's no grinding, shifts smooth, etc. The concern I have are 2 things: 1) Only in 2nd and 3rd... when maintaining a slower speed (in traffic as an example) as I let off/on the gas, the shifter will slightly move and vibrate. If the clutch is engaged, none of this happens. It's not bad, but enough to feel like something isn't necessarily right. 2) This mainly happen in 4th or 5th... the shifter slightly bounces up and down, almost like it's riding on unbalanced tires (and I do think the tires are unbalanced as I get a little of that bounce feel at higher speeds, which is maybe why it only happens in 4th/5th). Lastly, and sorry for this noob question but I want to work on this car myself, can someone teach me some on these manual transmissions? Like servicing them, best products to use, etc.; would be greatly appreciated. Thanks!!
    • Coilovers aren't even the first step. Bushes, subframe position and alignment, HICAS elimination, adjustable upper arms and traction arms in order to dial out understeer. All these things need/deserve attention first. ARBs (There's no such thing as a swaybar. Please, everybody, stop calling them that) are useful if you want to limit spring stiffness. Otherwise you can control body roll with springs. Spring and damper rates are a function of road surface, speed and usage. There is no solution that works for all cases.
    • Define "nothing". Is the starter spinning but not the engine? Engine turning but not firing? If the engine is turning but not firing, then you are missing either fuel or spark. You need to find whichever has gone missing.
    • Shitbox Tiguan updates, got the APR OTS tune put back on (no charge for it to be removed/added back), didn't want to just come in just for that (not a fan of wasting people's time for nothing) so I purchased an APR dog bone insert. The boys at German Performance Garage said they would fit it for free too since they had 1x hoist free. Now that's service you don't normally get from most workshops. Anyhow, tune back on, snow grate pulled out, dog bone insert back in and not going to lie, a few smiles when I nailed it around the industrial area heading back onto the M7. Amayama also said 1 to 2.5 month wait for the RB25DE heater hose, yeah why not, car has been off the road for nearly 3, what's a other 2.5?
    • Hmm I'm going to approach this from the other side... What is the car doing that you don't like or what would you like the car to do that is currently isn't doing (handling wise that is)
×
×
  • Create New...