meth
-
Posts
30 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by meth
-
-
FYI Work Meisters are 18" - forgot to add in original post.
Price drops -
Turbos $1300ono each including postage.
Work Meisters - $3300.
Porsche GT3 Brake kit - $3250
Also have a HKS type 1 turbo timer - $100 + post.
-
Update on what is sold.
Ab-Flug strut bar - sold
Body Kit - Sold
Block and heads - sold
hicas bar - sold
zees mufflers - sold
polished water pipes - sold
illuminated rear panels and kick panels - sold
border 850cc injector kit - on hold
-
see last post for price drops
Location: Melbourne
Contact: [email protected]
Phone: 0402-383-944 (email me if you can)
Please do not PM me and ask questions, I am most likely going to get emails quicker as I can check them at work etc.
All of this is off a Z32 - 2 seater targa
What is on hold pending payment or a pending a decision I have noted next to the item.
What's for sale:
Stillen GTZR Body kit (Brand new) Includes Sold / On Hold
-Type III side skirts
-GTZR Front facia
-GTZR Rear valance
-Ducted nose panel
-Door fillers
$2000 (for the entire kit) firm on this one
Pics can be seen at www.ttzed.com etc.
UAS Porsche GT3 Brake kit (used) Includes
-365mm Rotors
-6 Piston (Brembo) Porsche GT3 calipers
-Custom hats
-Custom adapters
-Teflon coated braided brake lines
-Ferrado 3000 pads (about 10mm of pad on each one)
$3500 (for the entire kit) ono
Garrett GT28RS Turbos Brand new with 0.64 Exhaust housing (Two of these - will split)
$3200 ono
Work Meister S1 2 Piece Rims (Excellent condition)
-White with polished alloy outer dish
-New 245/45 tire on the front
-80% tread 275/35 tires on the rear
-9.5" rear x 8.5 fronts"
-+30mm offsets
$3500 firm
H&R Racing Hub-Centric 5mm Spacers (Brand new Magnesium alloy - These are not cheap CNC aircraft quality rubbish i.e. you get what you pay for)
$180 ono
Zees quad exit 4" mufflers on hold
-Re-built and re-designed internals in 2.5" Y'd to 2" stainless steel perforated tube I can confidently say these will outflow any muffler (noise is quiet) which you can purchase straight off the shelf and last forever.
$1500ono
850CC Border Injector Kit on hold (scratched from laying around and also the AN fittings have been damaged (scratched) because of some idiot at a workshop) The Injectors were recently flow tested and cleaned as they had been sitting around and got dirty.
$1500 ono
Custom Subwoofer boxes (suit 2 seater only)
-These were made by Brad (DUB) and will need to be re-upholstered in vinyl or leather or whatever you wish to cover them up in as the existing stuff has stretched and torn here and there. These are an enclosed design.
$600
OGURA Twin Plate clutch kit and lightened flywheel-on hold This is almost brand new, was on a car for a week or so.
$1250 ono
Davies Craig electric water pump and thermo fan Brand new
-Thermo Fan - $160 for thermo fan
-Electric water pump - $155 for pump or
$300 for both ono
Illuminated Rear Panel (Genuine Nissan) on hold/sold
$350
Illuminated Door Stills (Genuine Nissan) on hold/sold
$350
Optima Yellow top battery (Replacement just before the car went off the road so it?s virtually brand new)
$400
Polished water pipes
$150ono
Ab-Flug Strut Bar on hold / sold
$600
HOK (House of Kolor) Violet Ice Pearl 6 ounces (enough to do a Large car)
$500 ono
Genuine OEM 3rd Brake Light
$240
Engine Pre-Lube kit (Brand new) as seen here - http://www.aus300zx.com/forum/showthread.php?t=251889
$200 ono
HICAS Eliminator Kit (brand new) I think it's Top Speed or something like that sold / on hold
$100
Solid Sub-Frame bushes
-$100
BODY
What has been done:
Every single wire in the engine bay bar the EFI Harness and 2 or 3 other wires have been re-located to behind the dash and into the fender walls ? including the harness which runs behind the radiator support. Aircon, and HICAS has been fully removed from the car. The fuseable link box, PTU and Relay box have been re-located to the passenger side footwell.
The car has never been in an accident ? there is your usual small dints here and there. The rear spoiler has been removed and is ready to be welded up (which I can do). The stone guard on the sides of the car has been removed back to the black zinc coating. The mounts in the engine bay for the HICAS and Relay Box - I have lead filled these (almost done) so that it looks as though they were never there. Full trim, interior is in excellent condition. The heater core has been replaced with a magna core along with genuine OEM heater core pipes and tap. All of the open cell foam was also replaced.
I know there is no 'offers' on this forum but I really do not know how much this is worth so if someone could PM me or point me in the right direction as to how much a reasonable price would be for this then please do so, so that I can ask a price.
Includes headlights, etc - basically everything except for the engine.
Block sold
I am not going to part this block out. I am selling it AS IS with:
Brand new genuine OEM Nissan Bearings
ACL Main Studs
20thou oversized ACL Forged pistons and rings
Pistons skirts have been coated
Crower I Beam 4340c Conrods and Crower 2000 rod bolts
The rods have been balanced to within ~1g of each other and re-bushed then bored and honed to suit the ACL pins
Block was bored and honed with a torque plate that I had made up
Brand new Genuine OEM Harmonic Dampener
Everything was balanced to a 47% Overbalance (including the clutch)
Brand new Stainless Steel welsh plugs
All of the oil galleries have been ported out and radiused so that there are NO 90 degree bends in the entire system.
Main water passage has been fully ported out - you could almost fit a 20c piece right through the block.
Brand new genuine OEM oil pump - this has been stripped down and also had all of the 90 degree bends radiused.
All of the oil plugs were taken out / block was tapped and tapered plugs have been put into the block throughout.
Deck has been skimmed
I am not 100% sure on this price as I am still waiting for one last invoice but I will most likely be asking anything between - If someone makes me a reasonable offer between that amount then I will consider selling it now.
$4000-$5000 (not including the torque plate or the clutch)
Heads sold
These are not assembled yet (pulled apart again so I could do more work to the heads) except that the bronze valve guides have been pressed into the heads. Everything ran for about 1000kms so none of this is brand new. If I get good offers I will part the heads out.
Include
Fully ported and polished inlet and outlet runners (done by SGP Racing in the USA).
5 angle valve grind
Titanium retainers
JUN 264/9.5mm camshafts
JUN Cam gears (adjustable inlet and outlet ? these have been powder coated and chromed)
JUN heavy duty valve springs
Valves are all still within limits as they were pretty much all new before they went in.
I also have powder coated cam covers that match the cam gears and a balance tube.
Genuine OEM Full engine gasket kit.
$4500 ONO Disassembled No price on it assembled
I'm sure I have a lot more stuff sitting around but will post it up at a later date.
-
I don't have any pics of it out of the car yet, but here are some of it installed
-
I only have pics of it installed, haven't taken any of it out of the car. If you would like some just send me an email to h1p_h0p 'at' hotmail.com
Larger jets can be bought for about $5 and the kit has previously had 200hp jets in it. I think 300hp is the max for this kit.
The purge valve can be bought for about $100-120, but you can purge it with the car off before you run and it stays purged until you disconnect the bottle.
can you use larger jets?has this kit got a seperate solinoid so you can purge?
-
price drop - $700ono
Offered this to someone else but they couldn't get the funds so it's open to anyone else interested at that price.
Thanks
-
I am selling my setup.
Genuine 'nos' brand.
Kit has:
10lb bottle (empty now) - mat blue
2 x foggers (for twin throttles)
50rwhp jets
all braided lines required for install
'nos' bottle pressure gauge
mounting brackets for bottle
solenoids and relay
Ready to install which is quite easy.
You don't need a re-map as this is a wet kit and only runs a 50rwhp jet. I used it on the dyno and my AF was virtually unchanged, actually slightly richer from memory and gave me ~35rwkw gain.
Selling because I am probably going with a dry kit after my rebuild is complete and run in.
This kit sells online delivered for $995 anywhere in australia and I am asking $800.
Kit has general wear and tear from being put on and off several times.
Located in Melbourne
pm or sms me 0402383944
-
I have to clear out some stuff from the garage so I have:
"Box of 6" Eagle One Ultra Glaze Polish as seen here:
$25 per box if picked up - Melbourne.
$35 delivered australia wide.
I have about 10 boxes with 6 bottles in each.
48 piece air tool kits - chrome vanadium bits and all tools are alloy. Not sure where they are made but warnings are in italian and spanish - all are brand new! - 20 available
Each kit contains
1x 1/2" Air impact wrench
1x 6" D.A.Sander
1x 6mm Air die grinder
1x 150 Air hammer
1x 3/8" Air drill(rev)
1x 4mm Hex key wrench
1x Oill pot
10x 1/2" Sockets 9 - 27mm
1x 1/2" Dr5" extension bar
1x 6" Pad\
2x Hand Wrenchs
5x 6mm Mounted grinding stones
5x 3mm Mounted grinding stones
1x Collet chuck
1x Collet retainer
4x 125mm Round shank chisels
1x Chuck key
2x 50mm Bits 4,6
2x 50mm Bits 2,3
5x Nipple
1x Blow mold case
$125 pickup from Melbourne
$150 delivered.
or call paul on 0402383944 for any info.
-
This isn't the cheap 'e' series amp.
The amp is virtually brand new, I used it for only a few weeks and then pulled my engine. It was never powered past half gain to run it in during that time.
Am asking $400 as the condition of it is still perfect.
Located: Melbourne
Ph: 0402-383-944
Thanks
meth.
-
***SOLD***
Just worked out what I am doing so the plug IS included.Thanks
-
Just worked out what I am doing so the plug IS included.
Thanks
At this stage it comes with no plug, I am not sure if i am going to connect up a dummy afm yet.Thanks
-
At this stage it comes with no plug, I am not sure if i am going to connect up a dummy afm yet.
Thanks
does it come with plug ? -
Located in melb
Working in perfect condition - selling as I no longer will need it (microtech ECU)
$300
pm or call 0402-383-944 if interested
Thanks
Paul
-
They came off a porsche and were going onto my new rims but were about 10mm to wide for the rim and I didn't want to squash them on so I left the 275's on my rims.
What did they come off. -
I don't have a digi cam sorry
I am in Balwyn
-
drop $350 ono
Need to get rid of them because I am moving out in 2 weeks.
-
(Use this as a guide for new threads. Delete and/or copy the fields as needed - dont forget to add your location in the description field above. Delete this message)
Item: 2 x Pirelli P-Zero Asimmetricos 295/30/18
Location: Melbourne
Item Condition:80% tread - 1 had a tiny nail go through it but was repaired professionally.
Reason for Selling: To wide
Price and Payment Conditions: $400ono the pair. Pick up or I can deliver if it's not in the sticks, I believe they were ~$600 each new
Extra Info: Tyres are N3 rated
Contact Details: pm
-
mate ill take them
please give me your number
pm sent
-
would you be willing to send to QLD ?
Any Idea what postage would be?
-
4 tyres
About 10 minutes from city
-
Dunlop sp sport 9000's
about 80% tread remaining.
$100 each
Melbourne, VIC
-
-
$2500 ono
offers are welcome as long as they arn't silly.
Price? -
Work Meister S1 2 piece 17" forged rims
NO gutter marks or damage to any dishes at all.
8" +25 offset front (has 245's on front)
9" +25 offset rears (had 265's on rear, now has 255's on rear) 'Should' be able to fit 275s
Currently have them on my Z32 300zx but the offset was for a GTR from memory so they will fit most other cars.
Pic of rims off the car
$2500 ono
Selling Everything To Date *price Drops In Last Post*
in For Sale (Private Car Parts and Accessories)
Posted
** Price drops **
Turbos $1200 posted each
18" Work meisters $3000
GT3 kit $3000