[Pull Type Clutch Won't Disengage]

Refloating this topic because i got the same issue and im getting crazy like hell, how you finally solved it? what was the problem??

[Parting Out Nissan Skyline R34 Gt-T 2 Door Coupe Bonnet Lights Shell Etc]

May you have the vct solenoid if its a neo engine?

[Wrecking R34 Gtt Coupe]

Looking for the vct solenoid, send me a PM or email to [email protected]

[25Det Vct,cas,z32,r32 Duck Tail]

You got a PM

[25Det Vct,cas,z32,r32 Duck Tail]

Green connector is coolant sensor champ vct is the black one to the left of it

i know it, i was making reference to the connector on the loom for this type of solenoid that its green and different from others simple 2 pin connector

you got this one?

[25Det Vct,cas,z32,r32 Duck Tail]

Repeated, sorry

[25Det Vct,cas,z32,r32 Duck Tail]

I'll take the s2 vtc solenoid, im from Spain i'll pay thq postage don't worry just let me see some pics of the solenoid, i need the one with the green connector on the loom, like the attached pic, let me know if its that one please

[Arp Headbolts On Rb25Det Neo From R34 Gtt]

I'm 99.99 percent sure there is no difference between neo and non neo head bolts \ studs.

Looking at the 2 part numbers, the one ending in 9 has a slightly higher torque specified.

I would buy what ever is cheaper.

But I wouldn't. I reused my head bolts for my rb2530 with 295rwkw, so do whatever.

Thanks dude for such a good reply, that's so useful for me

[Arp Headbolts On Rb25Det Neo From R34 Gtt]

Yuh, don't open the engine unless you have to. 300+ rwkW on an unopened Neo is easily doable.

Thanks for the replies, my rb its at this moment at 397hp on the flywheel and im looking for more, i'm gonna upload the dyno graphic when i get home for share it

i'll appreciate all your replies but none is helping me, can we focus on the arp headstuds issue? The head is out and being on the machine workshop at this moment so the replies telling me not to change the hg not to open the engine are useless anyway as i said i'll appreciate your replies

[Arp Headbolts On Rb25Det Neo From R34 Gtt]

Are you just chasing sizing on the bolts to confirm they are for neo?

If thats the case, im suprised that ARP cant tell you. Perhaps getting in contact with an engine builder who does alot of RB engines can help

Otherwise you could probably just dummy fit the head with 2 studs in and see how they fit and make sure the nut has enough thread to clamp the head to the block

Also with the link G4, if you have a 2.5bar map sensor then it maxes out at 1.5bar of boost. Not sure if its an issue but keep in mind that the 2.5 bar is absolute pressure not gauge pressure

Didn't bought any studs yet, just asking arp for wich its the correct application for the neo, they told me to fill that measurements sheet and send back as the two kits are different length and not interchangeable, im surprised too that arp needs this measurements to tell me wich its the correct application and i can't take because my knowledge doesn't reach that level and i don't have the necessary precision tools to make this measurements

Your idea may work but buying the two kits like a dummy to see wich its the correct ones doesn't seems good for me not talking about the money waste

Just wanted to know if someone here has mounted arp headstuds in his neo engine to know wich ones has bought and if they worked fine

I know the map sensor its 2.5 absolute pressure and i just can boost to 1.5 as the map can't read more of that, im doing this because i was boosting 1.2 with stock headgasket and if im not wrong the limit on the stock headgasket its 1.2 and my idea its get it to 1.4

Thanks for answering and for your help

[Arp Headbolts On Rb25Det Neo From R34 Gtt]

Hi there guys, I'm from Spain and i got an Euro S13 swapped with an rb25det neo coming from an skyline r34 gtt sinister with around 12.000 miles on it

The engine is a bit modded with an hybrid gt30 turbo with t25 housings spooling really fast, got a Freddy front face intake manifold rewelded with tig welder and Q45 throttle body, running a LINKecu G4 Plug-In as an electronic management system with 2.5bar map sensor and IAT, intake...exhaust...brakes...wheels...and other things that hasn't so much importance on this thread

The head and the bottom end are stock but im changing the timing belt with a full set of gates racing and i profit to get the head out and get fully checked and mounting a metallic 3 layer headgasket as im boosting at the limit of the stock headgasket 1.2bar and arp headstuds

Got an issue with the arp headstuds as the website show two kits for the rb25det, 202-4301 and 202-4309, emailed arp and they can't tell me what is the correct application for the rb25det neo and gaved me a calculator sheet like that to fill, my knowledge doesn't go too far to get this measurements and anyway i don't think that this will be necessary as many people run arps on his neo and dont think all those people has do this

Somebody can give me some light on this?

Thanks, cheers and sorry if my english isn't enough good

[R34 Rb25 Neo Work Shop Manual]

Hi there at the other side of the pool from Spain, i just requested it and some of my friends did it too but anyway i think the same as Rolls, i can't found so much technical info about the engine, head and his tolerances on the NEO engine