[Hicas Light On / Heavy Steering When Consult Connected]

EROR

I didnt get the speed reading either
but i do now with the ecutalk cable

[Hicas Light On / Heavy Steering When Consult Connected]

My ecutalk cable just arrived and worked a charm

cheers for the help guys
all solved now

[Hicas Light On / Heavy Steering When Consult Connected]

sounds like the cable now
ive just swapped the hicas ecu because of a few other issues and tested it with the same result
i may buy an ecu talk cable now to test it then rather than the cheap ebay one I had purchased

[Hicas Light On / Heavy Steering When Consult Connected]

Hey guys

I've checked a bunch of forums and haven't found a problem similar to mine.

I am driving a 94 gtr r32 and am having some hicas issues.

My particular issue is when I connect my consult cable and hook it up to my computer (it doesnt matter what software I use) my hicas light comes on and my power steering gets heavy.

I noticed the actual change for the power steering occurs when the solenoid drops from 1.05 when I normally drive to 0.25 using nissan datascan to monitor. When this occurs I believe it stops the possibility of 4 wheel steering occurring as the hicas solenoid stayed on 0.

I have run hicas diagnostics without using consult and I get error 5, faulty speed sensor. I am currently in the middle of sorting that out. When I check the self diagnostics through datascan, I get no codes which makes me question datascan a little.

My fluid levels are optimal in the front and back.

I get no error codes in the ecu either.

My g force sensor isnt broken.

I believe my car uses the super hicas in the late model r32's

Anyone have any tips?

I would like to keep hicas.

Cheers!

[Help With R32 Gtr Amplifier Install]

Cheers guys this thread is a huge help.

I was reading up another one which showed the hole unlike like mine and the picture by dean20 which had the plastic cover in the way.

Will follow these instructions tomorrow however my splash guard plastic screws are stripped and I need to get them out somehow :\

[R32 Wiring From Battery To Drivers Side]

Ahh thanks man
I found the foam piece you're talking about

Although with the black circular plastic piece with the tube sticking out stuck there its going to be quite a task to get it though. :\

[R32 Wiring From Battery To Drivers Side]

Hey boys!

Im looking for some help getting a wire from under the hood to inside the car.

Im wanting to do an amp install and everything else I have planned for and will be a breeze.

However I cannot find an opening anywhere.

I found a little rubber opening where the wire to open the hood leads however I couldnt find where it leads under the hood.

Any help?

I'm running a '94 GTR R32.

Cheers guys.