[Mongoose M80g Turbo Timer/boot Release]

I know this is a very old thread but just in case someone else needs it, to turn on/off the turbo timer for the m60 and I believe m80, you have to press both button 2 and button 3 simultaneously while the ignition is on.

Also, here are the programming instructions

(Note: this is from my m60 manual)

Drivers door must be open

Within 15 seconds of opening the door (note: Seems to really just be within de-arming the immobiliser), turn the ignition ON/Off the number of times for the programming feature (e.g. 3 times for remote code learning)

Siren will then chirp the same number of times as the programme number.

Press button one to turn the feature ON siren chirps once, lights flash once.

Press button two to turn feature OFF siren chirps twice, lights flash twice.

Leave system for 10 seconds system quickly chirps 3 times (lights flash 3 times) to show exit of programming mode

Ign on/off Feature Button one (on) Button Two (Off)

3 Remote code learning

4 Ignition Door Lock ON OFF

5 Siren Chirps ON OFF

6 Turbo Timer Each press = 1 minute

Siren chirps for minutes set, max 5 mins

7 Last Door Arming ON OFF

8 Door Diagnostics ON OFF

9 Engine Immobiliser ON OFF

10 Siren or Horn Siren Horn

11 CDL Pulse 0.8 Sec 3.5 Sec

12 NSW Siren Timing ON OFF

(CDL = Central locking)

Cheers

Vapo