Kustom20

Hi All, New designed Custom CNC Billet - Nissan Skyline RB26 Engine Ornament Plate, extensive work with some cool looking Gold centre lettering, Anodized black with a nice polished outer contour. This ornament plate received the Blood Red inlay in the letter R, Sapphire Blue on the lower inner level base which makes the Gold and Black break up nicely this could be inlayed with any color. With the tool path showing through the Sapphire Blue provides a nice appearance where the light hits from all angles Inside edging is silver which reflects the Blue and Gold at a low angle, Black Abyss very lightly inside the Gold Letters, highlights the edges and fades towards the centre of the letters. Crystal Clear to the top of the ornament plate provide a glass finish and smooth across the very top of the plate - All Gold has been encapsulated in the crystal. Anyone interested let me know and we can go through some different color's Thanks

Just sent a PM to you

Hi All, Just wanted to update thread with some images of the new designed Carbon Black Effect - GT-T Boot/Guard Badge Anyone interested in the GT-T Badges let me know to get an order faster than normal as these will be getting cut in tomorrows production for current customers orders Thanks

Thanks Mick, Yeah they look pretty good - with the Carbon Effect I had a play the other day with some other designs - but I guess its personal preference on design I put the words NISSAN going across the top of the letter T underneath the Inlay where the carbon effect is, and then going downwards in the letter T I used the S in the word NISSAN and put the word SKYLINE - in the drawing it looked pretty cool I think with this wording slightly noticeable under the inlay would be a cool design. If I can get a sample of this I will post it up As for the other set in Red thats no probs we can run a couple of sets and have them sitting ready for what ever color needed. Again thanks for your interest and support Mick - much appreciated

Hi, Thanks for your interest - I will PM you the details Cheers

As requested by some members, See below - Custom CNC Machined Billet GT-T Emblem Color Inlay Red Green and Blue - Cross Carbon effect in Blue and Green - the Red only received the full flat finish with the mirror polish under inlay If I had to do green again - I would probably lay another coat to darken the edges makes the centre pop a lot more - or maybe a very light coat of Black in the cross lines under the green which would highlight the highs and lows much better. The green still looks amazing just a personal preference Thanks All - PM if you are interested and any color choice

Hi Mick, Just advising - We have the Red and Blue GT-T samples completed, also inlayed one green and will post images shortly.

Thanks Mick, Very much appreciated - I ran off some sample GT-T Badges for you to lay in some blue and red as requested. I will send the images when these are complete with our other production orders. Take care champ

Hi All, with some recent work over the last week or so - I just wanted to update this thread See below RB26 Engine Ornament Plate Mirror Polished Upper Surface and - Logo Font accents Some pretty awesome color inlays - with a Crystal Clear Over Also if anyone is interested in Custom CNC Machined Top Feed - RB25 and 26 Billet fuel rails - let me know we can provide the following options, also supplied with the accessories AN8 fittings, Spacers, O'rings etc - spacers and fittings also anodized to which ever color you want Anodized any color Machine Finish Custom logo or font work incorporated Polished accents Color inlay or a mixture of all of the above Cheers www.kustom20.com.au

Hi Mick, sent a PM again regarding your badges, they have been completed for a week now attached image of the badge after cure and post cure of the inlay This image was taken after a semi polish and inlay - awaiting the final mirror cut and sealing. You will see in the image some polish still on the base surface area GTT - Black Carbon Set Cheers

We have a customer visiting tomorrow with the Gram Lights to take some measurements Below are some design aspects - the most important part is the correct Outside dimension as most wheels have different centre hole dimensions - if we have this we can design them for you any design that you want incorporated Anodized any color - with various color inlay - mill finished, polished etc Cheers

Hi Bruce, Due to many variations and aspects of the machining - depths, curves, edges, contours etc - we design to what you want in every detail. After we have finalized the drawing we send our customers the final draft for approval before machining. We have multiple finish options available Mill Finished - straight off the machine Semi Polished Full Mirror Polish Anodized Multi Color anodized Color Inlay's with pretty much any color Crystal Clear filled above the color - which is designed to withstand high temps in engine bays and the harsh weather, UV's etc Expressive Tool Path Mixture of all of the above - whether you want full polish on certain area's, Anodized mixed with color inlay etc All products are coated with our own special seal protecting it from oxidation - when anodized obviously we dont get this issue but fresh billet needs protection from the elements. We also ensure to use high quality products and having our own special formula provides a mirror sheen for up to 2 years before needing to either polish or apply another protective coating. Many products out there will affect the mirror polish and they lose part of their shine when they apply the coating, or discolor yellowish, where as our blend does not affect it at all when we apply it. I will shoot through a PM and we can look to provide some design's with you to be able to advise an accurate costing. Thanks

Hi Anthony, Yeah the GT-R 35 style badge look pretty unique PM the details and will advise asap Cheers

Hi z00key, I will PM the costing to you regarding a set of the GTT - badges Thanks

Hi All, Just wanted to share a recent sample we done after supplying a customer with a polished only version. See below image Nissan Z-tune Badge Custom CNC Machined 6061 Billet - Anodized Black Upper Surface Full Polish By this friday we will have some pretty amazing pieces we can share when our customers receive the items.

Hi All, Just wanted to update post with a new customer RB26 Engine Ornament Plate CNC Billet 6061 - Mirror Polish finish Image captured with various reflections and light to ensure we could show the mirror finish for you all. Looks great Also working on some other products and should have them up soon. Thanks

Hi Mick, I will send you a PM - the sample badge looks great

We ship international, if you can advise a product you are looking to order we can calculate shipping costs. Just need a drawing, dimension or if there was an interest on a previous model you have seen that would be great. Cheers

PUNISHD - Custom Number Plate Upload of the previous images were the mill finish - this verison now has a mirrror polish Will be inlayed with DNA Black Abyss Candy on the base around the letters and the skulls before a Crytsal Diamond Clear Over Will upload pics when I have the final version. Anyone interested in Custom CNC - Just send a PM Thanks All

Custom CNC Billet - Number Plate Style for Burnout Entrant Vehicle Item will be inlayed with Black Candy and Full Polish on the Skull and Lettering - should look similar to a Black White style number plate but should pop some. Anyone interested in Custom Show plates CNC Billet with any color and finish - can be extruded type lettering or inverted type - letters or image incorporated Thanks All

Just updating with some variations of the Z-Tune Badge - CNC Billet 3mm Thick - this badge dimension is 138mm x 31.5mm but can be changed to whichever size needed Lower Base will be mill finished Upper Edges and contours will be full polish Any choice of color for the inlay Also either inverted lettering or extruded version

I was just about to PM you - your second set is almost cut running the last tool path now. Then they will be booked into the polish and final finish tomorrow. Anticipating a completion by this friday Thanks again Anthony

Thanks Ewan, Glad you like them Photo's dont do parts justice sometimes - getting light and shade reflection in the right places is hard I think out of about 200 photo's of some parts we manage to get the right lighting for the part and choose maybe 3 or 4 images to go with. Take a pic when you have them on the car as well

Here is a close up view

I have drafted a design with outer dimension of 68mm - depending on the brand make model of the rim will determine the dimensions. See below for VOLK - Style centre cap CNC Machined Billet - Polished or Flat - black shade, color inserts, possibly Carbon outer - designs and styles are endless with cnc machining.