002-M-P
-
Posts
17 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by 002-M-P
-
-
Since I am still accumulating parts and have never actually run my motor, I do not know what vacuum the RB26 motor runs, so I don't know which spring to get for my Tial 50mm blow off valve. My first guess would be the 18-21 mmHg (-11psi) spring, but I'm not positive. Thanks.
-
They are the same.
Tested their resistance vs temp and both do the same thing.
Good old nissan.
Thanks alot sean...thats so crucial...Thanks Nissan!
-
The clip/connector part of my factory ait sensor snapped off, so I need to replace it, but can't figure out what part number (oem nissan or other) to replace it with. I took it out and the coolant temp sensor...they look identical, but don't know if one has better resolution than the other or something similar.
I have been searching this topic for a long time now and haven't found anything helpful, so any info would be greatly appreciated.
-
Any opposing cylinders in the firing order, between the head and the throttle body.
Based on the PFC FAQ, you should use cylinders 3 and 4 for this it seems, does this align with what most people use?
-
I just read over the Djetro faq and saw it said that the rb26 had to have correct placement of the vacuum port because of the multiple throttle bodies...but it does not say where this "magic spot" is. Any ideas?
-
After reading this thread a few weeks ago, then again today, I am still unsure of what to do for my application, so if someone wouldn't mind pointing me in the correct direction...
RB26, acl race bearings with calico coating, have not decided on pump yet (JUN if money allows, N1 if not). Anyways, the car is a daily driven street car but sees the cicuit time about once a month. Revs should stay below 8000rpm at all times (7500rpm shiftpoint, 7800rpm revlimit). Would you say that 1.25mm would be the best since it is in between the two applications or should you just go straight for the 1mm since it will see the track on a regular basis?
-
anything with a zero speed ignition cut should allow you to build boost. I know it works on my emanage ultimate
-
-
http://www.skylinesaustralia.com/forums/in...showtopic=93880
well that has all the results...
I realize this too (looked through that thread a bunch of times), but to be in there you need dyno results, which everyone might not have. Anyone elses experiences are always helpful too.
-
Depends what sort of power/aims/use of the car to be honest
I guess I may have worded that weird...I'm just more intested in what people are actually running, not really looking for recommendations for me.
-
I posted this on another forum to, but you guys generally know more, just not as many rb26 people it seems....anyway. Pretty simple thread, just curious as to what single turbo you run, is it ball bearing or journal bearing, and what A/R do you use on the turbine side...also is it split flange or not. Then if you wouldn't mind commenting on spool and how the car pulls to redline.
I know my TO4R on my stock ported rx7 had a .84 A/R and it spooled decently quick, but it def died out about 7300rpm and I rev'd to 8100rpm, I would hate for that to happen again on my RB, but also don't want to wait forever for boost to hit.
-
Thanks again disco....any chances that the GT4088R bb center section is compatable with the GT4088 journal bearing turbo's housings? (That would be a nice stepup program for me)
-
So any other experiences with spoolup time and journal bearing turbo's like these?
discopotato: Is that to make a T3 based TO4Z?...because my manifold will be T4 divided.
-
I posted this over at gtr.co.uk, but haven't got any responses really, maybe you guys can help me out...
I have been searching for info on this for a while now. I would truly like to buy a GT4088R and be done with it, but right now money is tight and I'm not sure I can afford a ball bearing turbo when the time comes.
So what I am looking for is anyone's input on spool time for decently sized journal bearing turbos on a stock displacement motor with stock heads. My goals are between 550-600 whp. I have a pretty good knowledge of turbos and choosing the right turbo, but some first hand RB26 specific info would be great. Specifically these are the turbos that I am looking at mostly...but if anyone has any other suggestions definitely don't hesitate to voice you're opinion. Some specs were hard to find.
Also I must state, that this will be in a LHD Z33 and I really do not want to deal with the hassle of twin turbos and downpipe routing around the steering shaft, so twins are pretty much out. My hp goals are in the 550-600 whp on pump gas. The motor has CP pistons and stock rods with arp rod bolts...fyi.
Garrett TO4R
compressor: TO4S
.70 a/r
66.5mm inducer
84 trim
flow: 75 lbs/min 960cfm
360* thrust bearing standard
turbine: T4
.96a/r divided
P trim wheel
flow: 75 lbs/min 960cfm
360* thrust bearing
wet center section
Garret GT4088
compressor
.72 A/R
88mm 54 trim
turbine: T4
1.06 A/R Divided
77mm 84 trim
PT66
Compressor:
66mm inducer
52 trim
Turbine: T4
.96 A/R Divided
P-Trim Wheel
76 Trim
360* Race bearing
-
bump
-
Hey all. I just recieved my RB26 motor yesterday and am now looking for a factory Crank Pulley (or aftermarket one if you have one) cause the one on the motor has a chip in it. Only catch....I need it shipped to me in the USA. Please let me know if you have one and if you can help me out.
Tial Bov Spring?
in Forced Induction Performance
Posted
hmmm, no dice?