maxandmax

Thanks ! And by the way , I'm I need to hook up the pin 57 and 54 same if I now have a RB25DET ? The throttle body is different on the RB25 so ,, is it very important or I need to install a throttle body of RB20DET to make it work right ?

THANKS Paul!!!!!! SO just to be sure at 100% , that meen that I need to cut the 2 wires that come with the boost control harness to replace them with the pin 25 signal AND a 12V from anywhere and hook them up on the solenoid? Thats what we call a FAST answer !

I have a R32 GTS-t that I swapped for a RB25DET. I have in my possession a RB20DET AP engeenering edition Power FC with the commander. I installed the optional boost controller but I would like to know how to feed the the boost control kit. On the r32 gts there is no solonoid so how I hook up the wiring ,,,, Here is some thread about my probleme. I know that the R32 PFC has no pinout for the vtc but thats not a problem , I will install a RPM window switch to run the VTC. My problem is in the installation of the boost control kit on the R32 Powerfc. Does anybody could help a litle Canadian ? Here is some link: http://www.skylinesaustralia.com/forums/R3...l+kit&st=60 http://www.skylinesaustralia.com/forums/St...ost+control+kit http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#38 Here are some pics of my car and my project ( its the red r32 with gold gravity's rims ) http://forums.rhdquebec.com/showthread.php?t=2031&page=2