Jump to content
SAU Community

roz85

Members
 View Profile  See their activity

  • Posts

    75

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Posts posted by roz85

    Master Power Turbos Any Good

    in Forced Induction Performance

    Posted

    Saw this thread late last year but didnt have anything to add then. Ill be testing a few of these turbos to see how they go (on a 3rz hilux) so will post back results when it happens.

    Thought id let you guys know that a mate is doing a group buy at the moment for the master power turbos (hes the sole distributor in AUS). Any turbo in the range for $900. Might save yourself a few dollars if your looking for a new turbo at the moment. Heres the link http://www.expressparts.com.au/proddetail.asp?prod=MPGB

    Gtr Injector - Have 2 Different Ones

    in Forced Induction Performance

    Posted

    My hilux runs gtr injectors and yesterday i found one to be leaking from the body. I found 4 x gtr injectors, and chucked one in, to find that it doesnt work, and im thinking that the different models are not interchangeable.

    Can anyone shed some light on this matter. Are the r32/33/34 injectors different? The ones currently in my car have no: 0J50 - 0604N, replacement injectors have 0A50 - 0707D

    Can anyone help out? Need to get my car running asap.

    Cheers

    Anthony

    XTR GT3040 Max Power 206kw??????

    in Forced Induction Performance

    Posted

    sorry to hijack, but whilst we are on the conversation of large turbos i need a little help. When my 2.6 astron was dyno'd last time, the boost controller we were using had problems, and boost couldnt be increased any more than 14psi. The turbo is a hi-flowed t04 with a 1.06 a/r exhaust housing, sierra rear wheel etc. Power was 303hp atw approx 225kw atw. If what im reading is correct, large turbo's like this wont reach their efficiency till after 20psi depending on the specifics (i have no idea about the flow charts of this turbo etc)? So i should expect something around the 350hp atw mark and upwards with the turbo boosted to around 20psi?

    Turbo Selection - 4cyl - 300rwhp?

    in Forced Induction Performance

    Posted

    The engine (4g54) is currently making 303rwhp @14psi using a hiflowed to4 (1.06a/r exhaust, .60a/r comp). Fullboost is somewhere around 4500rpm, and am looking to change for something that makes similar power but which has usable power lower down in the rev range. Is it possible? Perhaps go for something a little newer/BB - GT range?

    Is it possible to make similar power, having usable power down low or are my expectations too high? :D Suggestions?

    Need clutch install - Brisbane

    in Queensland

    Posted

    Its a little difficult reading your post what you actually are asking!

    If you want to know who to goto with regards to ripping the g/box out, removing the old clutch and throwing in the new one, then email me at [email protected] !!!!! I have a good mechanic i have used for 2 clutch installs and they are very good. BUT he is over the southside, so may not be appropriate for you.

×
×
  • Create New...