Jump to content
SAU Community

350stato

Members
  • Posts

    91
  • Joined

  • Last visited

  • Feedback

    100%

Posts posted by 350stato

  1. This may have (most likely) been covered before but I have not found any definitive answer's as yet,

    The RB25 R33 manual gearbox's obviously have a selector fork issue with the stock cast alloy item's, I know PPG do a billet item, but at $550 each fork, that's a little rough for most people's pocket,

    Does anyone actually know of some where that makes stronger/steel etc replacements? Surely there is more than one company that makes these for such a widespread common problem,

    Regards,

    Chris.

  2. Ok, Confused as hell right now, I have an RB25 that will be running a few track days, (drift/circuit) It has a Nitto oil pump, crank collar, 2 x 1mm restrictor's, So do I run the oil drain from the back of the head to the cold side, high on the sump above oil level, rocker cover breather's to a catch can, catch can drain back to sump aswell? do I put a breather on the catch can? (Also need the car to be street legal) Will this work? I'm about to pull the motor to fit the oil drain in the head, Would like it to stay there once I put it back in :)

  3. I have an A'pexi S-AFC 2 up for grabs, I bought it from a friend about 4 years ago, never used it, It was in R33 Skyline turbo auto making 276rwhp, I would imagine the tune is still good, It has never been used since being removed so that's the tune that will be in it now,

    Good condition, Will post anywhere in Australia for 220 inc registered post

    Best to call/text as I am not on here all that often,

    Located in Brisbane, Pick up available, 0481109712

  4. Autronic SMC ECU & 500R CDI, Was running on RB25DET, Comes with loom etc to suit, Electrionic boost controller, switch for high/low boost. Was running 10 & 20 psi
    Comes with loom for coil packs, Also has a loom for injectors, Unsure if needed but it's there, suit's 550c RX7 injector's, Perfect working condition, was removed from my R33, running different ECU with the new build, $1500 ono, Open to (serious) offer's, Alexandra Hills, Brisbane, Can post, 0481109712

    09rf.jpg

    kem0.jpg

    wdfl.jpg

    anef.jpg


×
×
  • Create New...