Gav_21
-
Posts
5 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by Gav_21
-
-
Haven't tried powering it up with a 12v source yet. I've tried 2 ECUs, both to be known working (one for the Silvertop and one that came with the ceffy motor). Will power up the ECU tomorrow and see what happens. Cheers
-
1
-
-
Hi all, having an issue with my HR31. Bought it a while ago and the previous owner had chucked a Silvertop rb20 in it. Wiring is pretty dodgy but it worked so I just left it. Motor ended up having low comp, so bought a rb20 from a ceffy. Dropped it in lost interest in it but now back working on it after a year or so. Connected everything up tried to start it and I have no spark, went over the whole car and found that my ECU isn't getting any power. Now the plug that sits near the power steering reservoir is plugged in and that connection is getting power, but LED isn't coming on, on the ECU. Here's the fun part, I have a lot of plugs down by the ECU that are getting power but they don't lead anywhere. Pictures below are of the plugs near the ECU, any help is much appreciated. Hopefully I've just missed something small or it's a fuse somewhere ect. Cheers
-
Txt 0406065628 for quick reply
-
Rb20 starter motor $50
Rb20 BOV $30
Rb20 CAS $100
Rb20 inlet plenum $10
Rb20 turbo an manifold $200
Rb20 intercooler $10
Rb20 dump pipe $10
chrome sideskirts $20
15" alloys with tyres 4 stud 4x100 $80
hr31 passage window control unit (broken button still works) $30
rb20 valley cover $20
rb20 coil packs x 10 with mounting brackets unknown condition $40
RB20 AFM unknown condition $5
R31 S3 grill in black $10
Wastegate spring 38mm 3-4psi $5
HR31 wheels studs
in Drivetrain and transmission
Posted
Hi all replacing the wheel studs in my HR31, did a lot of research to find out if they where the same at ausdel 31s. From my research I found out they where, picked up 16 new ones and they just don't want to go in. They are the S457, the knurl is 12.9mm but I measured one that I pulled out and it's 12.6mm. Also the splines look different and the S457 has a few more than the ones I pulled out. I did read that they are very tight getting them in, anyone else had this problem?
Car is a HR31 passage and this is the front hubs, haven't attempted the rears yet. Cheers