a31ceff
-
Posts
15 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by a31ceff
-
-
-
that plug with just 2 wires left ive got a face lift ceff loom in my non face lift and was told i had to cut 4 of those wires up and join them with that plug but only 3 of them are the same colour ????
-
You need to earth the spark plug on the thread or the hex section otherwise it won't spark.
If you are unsure on how to perform basic diagnostics, it is probably better if you take the car to someone as it is too difficult to be able to explain more complicated testing methods.
yea tru that
-
How are you testing the spark?
And you are aware that if you don't earth the body of the plug, it will not spark either?
i just left the plug in the coil and put it on my rocker cover
-
just pulled out a plug today and found it has no spark but ther is power at the coil plug??? ive tryed a new ignighter but that didnt work ??? any idea's
-
-
You mean it keeps cranking over but doesn't start?
The CAS could be slightly out, rotate it a bit clockwise and try again. Most likely base timing is too far retarded. You got a test light?
yea its cracking the motor is out of another car whice was going sweet been puting it into my ceff ova the last 3-4 months so the timing shouldnt be out as it hasnt been touched
i hooked a pipe from the j pipe to the turbo 4 intercooler piping at the mo jst to get it started
any thing to check ???
-
just got me 30det all in my car and just got it started turned it on a it went for like 10 secondes and turned off but i had no intercooler piping hooked up and then i left it for about a month got a biger fuel pump ect and went to start it and it wont start
i put a test lite on the plugs that goes to the coils and there was power and there was fuel then i figured out the cas was unpluged pluged that in and it still wont start ??? n e help would be mint
-
just got me 30det all in my car and just got it started turned it on a it went for like 10 secondes and turned off but i had no intercooler piping hooked up and then i left it for about a month got a biger fuel pump ect and went to start it and it wont start
i put a test lite on the plugs that goes to the coils and there was power and there was fuel then i figured out the cas was unpluged pluged that in and it still wont start ??? n e help would be mint
-
You cannot use stock wiring. It drops volts
http://www.skylinesaustralia.com/forums/Fu...Rew-t91993.html
it will be sweet to run the pump that fills up the surge tho aye??
-
chur just woundering is there any diagrames or pics to show how to hook up a external fuel pump
ive hooked up all my surge tank and fuel pump just not to sure on how to wire it up the internal pump that feeds the surge tank is all on factory wiring
to hook the external up do i have to run a power wire from engine bay to fuel pump or can i just tap into 1 of the other power wires in the boot i brought sum wire and a relay think its a 30-30sumthing a and saw it had like 4or 5 maby 3 conectors and not to sure wat gets hooked up to wat ??? any help would be good bit lost aye
-
-
its a r32 gtr box
-
ive got a 30det and a gtr gearbox been converted to rwd in my ceff the other night i was hooking up the master cylinder a clave cylinder then went to bleed it and ther was nothing it wasnt pushing the clutch fork??? im using my factory cefiro clutch master cylinder do you have to use a gtr one ??? cozz wen i pump up the clutch it just blows heaps of bubbles in the master cylinder ???
Rb26 Gearbox Into Rb25 R32 Gtst
in Drivetrain and transmission
Posted
chur i put a r32 gtr box in my cefiro but i didnt cut the transfer case off so had to cut a hole in the gearbox tunnel for that the crossmember doesnt fit i got a custom made 1 and yea the slave is the same i used my 20de slave on mine abit of a tight fit but it does would of fit straight in if it wasnt for dat transfer case