Ryan180
-
Posts
102 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by Ryan180
-
-
Great write up, i have just completed one side on my 180sx with an R33 rear end. I used this guide with a few little tricks of my own and i thought i might share them.
First of all, you will need a couple more tools doing this way
32mm socket
bearing press
bench vice
3 pronged pulley style puller
• 36mm socket
19mm – For 4x Bearing Bolts
• 17mm socket or spanner
• Breaker bar
• Jack and stands
• Leadlight
At this point, this is where the vice and a 32mm socket come into play. Place the hub assembly upside down resting the 4 bolt holes of the bearing on top of the vice jaws (studs pointing to the ground). Grab the 32mm socket and place inside of bearing and attach a1/2inch extender, now grab a decent sized hammer and bash the crap out of the socket. You will end up removing the bearing from the hub except for some of the inner casing. So you will still end up with a bearing looking like this.
<br style="mso-special-character:line-break"> <br style="mso-special-character:line-break">
And this is what the hub looks like, to remove the rest of the bearing casing I used a dremel being careful not to score the hub, then gave it a few love taps with a chisel which will cause the bearing to crack right though, then just lightly pry it off with a flathead
I then pressed in the new bearing using the same vice, the vice I have wasn’t quite big enough for the job but still did the job, when pressing the bearing on the shaft it would get really tight in some spots, at that point I would gently tap the bearingwhich would help slide the bearing further on the shaft, repeated this method to fully seat the bearing.
And you’re done, just need to put it back on the car.
Hope this saves you a few hours
-
Hey there,
Do you still have the diff out of your R33?? if so is it vlsd or aftermarket?
-
how much for the rear lcas to 2117??
please PM me
-
Do you still have the HICAS rear toe arms?
-
Do you still have the Hicas Unit??
-
PM Sent.
I've got first dibs if it's still for sale.
-
Received mine Phil.
Thanks once again, trader rating left
-
Yep received every ones fine
ETA is they will get sent out to me mid next week.
Wow thats great! are you still dealing with the same HEL guys in the UK. What a turn around!!! hahaha
Thanks for all the the trouble you have gone through to make these available to SAU at these crazy low prices.
Kudos go out to you buddy
-
Too late for 180sx SR20det Clutch line??
-
AE92 SX Twincam.....great little car that isn't completely gay
+1 FTW
-
standard BOV yes and it ok under load but will not idle had the motor replaced about two weeks ago could it be a vacume problem
Try raising the idle and setting the TPS
-
If you block it off, how will it be venting to atmosphere???
-
Time for a rebuild one would think
-
the engine builder needs a talking to
+1
What a bannana head
-
I just used AirRoadDirect to ship a striped down SR20 from Townsville to Sydney. I used 6 boxes to cut the handling weight down, Instead of 1x113kg box. Each box weighs roughly around 20kgs. The quote was $214 which is pretty competitive IMO.
I had a quote from Pack and Send for 4 of the boxes and it was well over $300.
I'll repost once i see the goods in Sydney. Hopefully not damaged
All Packages arrived safe and sound, right on que.... AirRoad get the thumbs up from me
-
Can i please change my username to Ryan180, thanks in advance
-
I just used AirRoadDirect to ship a striped down SR20 from Townsville to Sydney. I used 6 boxes to cut the handling weight down, Instead of 1x113kg box. Each box weighs roughly around 20kgs. The quote was $214 which is pretty competitive IMO.
I had a quote from Pack and Send for 4 of the boxes and it was well over $300.
I'll repost once i see the goods in Sydney. Hopefully not damaged
-
Thanks Phil, What a Champion
-
I'm willing to chip in for a ticket to send Phil to the UK HEL head office so he can punch them in the face!
+1 to that.
Can i go too???
-
GOOD NEWS!
THEY HAVE FINALLY BEEN SENT!!
Got the tracking number in an email today so now we just have to wait. Their ETA of 2-3 days with FedEX seems a bit out considering the tracking number says ETA 19th but meh, atleast they are finally coming! Now fingers crossed there is no problems in customs. I told them to send them in three seperate boxes so each one has a value under $1000 so we'll see what happens.
Oh that's awesome news.
Any chance we can all get the tracking number to keep an eye on our eagerly awaited items .
It would probably stop alot of us asking you where the shipment is at.
-
Any news on the shipment
-
What's the lastest?? and also wondering about the mounting blocks
-
Walbro 341 Fuel Pump - Used - No reserve - Bids Start at 99cents
Nissan 180SX Rear Wiper - Good Condition - No reserve - Bids Start at 99cents
Nissan Skyline R33 GTST LH Kick Panel (ECU Cover) - Good Condition - No reserve - Bids Start at 99cents
--- Listing on Ebay ending 13 Jun, 201020:25:34 AEST ---
Thanks for looking
Any questions please PM me or sms on 0432 643 531
-
-----GARAGE CLEANOUT - ALL PARTS ON EBAY-----
--- 1st Listing ---
S14a Silvia Standard Passenger Seat - Mint Condition - No reserve - Bids Start at 99cents
4x Super Advan 16" Wheels with rubber on 2 Wheels - Used - No reserve - Bids Start at 99cents
Nissan S13 180SX Type X Boot Lid - Good Condition - No reserve - Bids Start at 99cents
Nissan R32 GTR BMC BM50 ABS - Good Condition - No reserve - Bids Start at $50.00
--- 1st Listing on Ebay ending 09 Jun, 201014:27:48 AEST ---
--- 2nd Listing ---
Walbro 341 Fuel Pump - Used - No reserve - Bids Start at 99cents
Nissan Stagea RB25Neo T3 Turbo - Suit Rebiuld - Bids Start at 99cents
Nissan 180SX Rear Wiper - Good Condition - No reserve - Bids Start at 99cents
Nissan Skyline R33 GTST LH Kick Panel (ECU Cover) - Good Condition - No reserve - Bids Start at 99cents
--- 2nd Listing on Ebay ending 13 Jun, 201020:25:34 AEST ---
Thanks for looking
Any questions please PM me or sms on 0432 643 531
R33 Rear Wheel Bearing Replacement
in Tutorials / DIY / FAQ
Posted
I tired taking off the backing plate but soon realised you still need this to mount the handbrake shoes