lead foot
-
Posts
27 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by lead foot
-
-
so after about two years of sitting i fired up the old girl and she idles for a while then just shuts off, starts again then just stops again,. she has near new plugs, new coils and new fuel pump. any ideas?
cheers Rob
-
hi guys,
Just need a couple of points cleared up please. Replacing a walbro gss294 with a walbro gss342
1- do I need to cut the bottom off the cradle and attach using a hose clamp?
2- do I bother with the foam sleeve?
3- The old pump had wire with "spade" connectors on which clipped to + and - of the pump will this be fine to use instead of the supplied clip and then soldering the wires together?
cheers Rob
-
Hi guys, just bought a wallbro gs342 to replace my wallbro gss294 and need clarification on a couple of points.
1- as the bottoms of the pumps are different do I just cut off the bottom of the cradle and hose clamp the pump in place?
2- the old pump didn't use the supplied wire and clip it just has fittings on the end of the wires attached to the cradle, this will be ok to use?
3- do you bother with the foam sleeve provided?
cheers Rob
-
Thanks mate, I will be in contact.
-
sorry dude, thought you knew of a particular shop! Thanks for your help though as I have never heard of google!
-
thanks guys, I will look them up
-
thanks, where from?
-
Where do people go to get the car tuned in the Brisbane area? I have an r32 with a power fc but no hand controller! Any help appreciated.
Thanks Rob
-
Hi guys,
Does anyone know where to get coil packs from to suit a 92 r32 rb20det? I prefer to buy over the counter but I only want cheaper ones I don't want to spend $5-600 on splitfire and the like. I'm in Brisbane and online purchase is ok to
Thanks Rob
-
sounds like afm to me, try a set that you know work and then can rule in or out.
-
-
yeh hit it up - long story short you need a hicas lock bar and need to plug your power steering lines
i did it on my 32 with a mate in about an hour - its just a broad minded person undoing some of the nuts, but pretty simple really
you'll need a wheel alignment after however
where do you get a hicas lock bar? and how much was it?
-
Have you done a forum search? Could yield some useful info...
not yet, but will
-
hey, my r32 gtst has wobble in the rear end on the highway. It feels like the rear steering is free. Can I lock hicas? and how to do it?Can I buy a Kit? any help or thoughts?
-
Tuners
in Queensland
Vonny at Dyno Tunz - Browns Plains..Unit 4 79 Eastern RD,
Browns Plains, QLD 4118
(07) 3800 4940
He's tuned my 34, My Ex's s13 and Lots of other cars and have never heard a bad report..
My ex used to go to Charlies, And Vonny is the only one he'll take his car too
Thanks, sound promising!
-
Sounds silly but are the plugs running to hot. Had the same issue and changed to cooler plugs, problem solved.
-
Hey guys,
just wondering if anyone knows of an exhurst shop thats open on sundays, changed my dump over yesterday, broke a bolt and have a leak or 2...
Thanks
right price exhausts are open sundays at underwood
-
hey I have a intermitent dry bearing noise in my 32 gtst. it is hard to pin point and doesn't do it all the time. it doesn't matter if it's cold or hot it only does it some times. It is a daily driver and may not do all week but then does it for one trip then its fine again. The car drives normal and doesn't use any oil or water, any thoughts? as I can't take it to a machanic as it doesn't do it all the time.
-
Tuners
in Queensland
hey does anyone know what happened to charlies motors and is there a tuner in brisbane who knows anything about skylines and power fc,s. my 32 needs a serious tune any help?
-
Does anyone know what happened to charlies motors in east brisbane? where can i get my rb20 tuned by somone who knows what there on about.
-
No, thats your radiator coolant doing its job - being hot.
If your head gaskets were gone your water and oil would be mixing and your car wouldnt be running (you'll see white spots in your oil).
Nothing to stress about man.
thanks, thats a load off
-
They are a piece of piss! Simply take of the caliper and they just about fall off. Have a look and a play, there is nothing to it. If you can change the pads you can change the rotors
-
Hey, i have some very small bubbles in the radiator water when my r32 is running . is this a blown head gasket or could it be something else? and ideas on what it is and how to fix would be great. Also are ther any good mechanics in brisbane for this type of car?
-
Same broblem years ago. Air flow meter. Try the wreckers to see if they will let you try one
R33 Problems Wont Start Cas (crank/cam Angle Sensor
in Forced Induction Performance
Posted
hey boostn, any luck ? mine is doing it too but havent found the cause yet.