Jump to content
SAU Community

theponyremark

Members
 View Profile  See their activity

  • Posts

    429

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Posts posted by theponyremark

    V35 Gt250 Electrical System

    in VQ Series - V35, V36 & Infiniti

    Posted

    It could be the the fuses found in the IPDM relay box behind the battery, the 100A fuses found on the positive cable/terminal of the battery or your BCM being fried. Try checking IPDM fuses and the relays, then check the fuses on the positive cable/terminal. BCM is about $400 delivered via Amayama (plus $100 labour for Nissan Ferntree Gully to install and program the BCM to your keys).

    Servicing Your V35 - List Of Whats Needed

    in VQ Series - V35, V36 & Infiniti

    Posted

    To help fellow owners of the JDM 2001-2003 Nissan Skyline V35 250GT Sedan's. These parts should be interchangeable for the coupes and higher makes of the V35 series. I was surprised that some of these parts are interchangeable with the current R35 GTR e.g. fuel lock lid actuator, tensioners, etc. I have completely DIY the following (complete with part numbers and prices that I paid in $AUD from Nissan Japan - get the parts of Amayama). To perform the timing chain replacement and all the jazz in between, you are not required to drop or remove the engine. Remove the front-end objects such as: radiator, hoses, clutch fan, air-intake, intake manifold etc.

    • Oil Filter (Nissan Pitworks)
      • ​AY100-NS004, $11.49
    • Cabin Filter (Denso)
      • ​01453-50930, $26.16
    • Spark Plug - Set of 6 (Nissan NGK)
      • ​22401-AL815, $86.76
    • Timing Chain Tensioner - Left/Passenger Side (Nissan)
      • 13070-EY00A, $30.67
    • ​Timing Chain Tensioner - Right/Driver's Side (Nissan)
      • 13070-JK21C, $30.71
    • Timing Chain Tensioner - Right/Driver's Side (Nissan)
      • ​13070-JK21B, $30.61
    • ​Cam Timing Chain Guide/Slipper (Nissan)
      • ​13085-JK20A, $12.00
    • ​Timing Chain Guide - Slack Side (Nissan)
      • ​13091-JK20A, $28.94
    • ​Timing Chain Guide - Tension Side (Nissan)
      • 13085-AL511, $5.97
    • Main/Front Timing Chain (Nissan)
      • ​13028-JK00A, $93.28
    • Cam/Camshaft Timing Chain - Set of 2 (Nissan)
      • ​13028-JK20B, $74.46
    • ​Water Pump Set - Includes 2x Coolant/Water & Oil Seals (O-Rings) (Nissan)
      • ​B1010-AL50B, $68.60
    • ​Fuel Filter (Nissan)
      • ​16400-2Y505, $68.11
    • Fuel Pump Outlet Seal - O-Ring (Nissan)
      • 17049-4M400, $3.32

    V35 Bcm - Finding The Part Was The Easy Bit

    in VQ Series - V35, V36 & Infiniti

    Posted · Edited by theponyremark

    Hello Citizens of SAU,

    After learning that my rear demister/defoggers and door triggered map lights weren't working, I have concluded that the BCM was damaged and required replacing. I initially thought the difficult bit was to source a brand new BCM from Nissan Japan (like-for-like, thanks to amayama.com @ $300 AUD) and that the easy bit was the programming by the bountifulness of Melbourne automotive locksmiths.

    I was wrong.

    Not many locksmiths knew what I was talking about, and mentioning 9 out of 10 times "CONSULTII/III protocol or tool" gave locksmiths an opportunity on the phone to say "sorry, no can do". Replacing BCM in the V35 is only held in by two top tabular clips and a screw bolt on the bottom - easy as pie. Despite this, Nissan Australia (Hoppers Crossing) did not want to have anything to do with this car. Even when I mentioned that I have a brand new BCM at hand.

    I have a 5-digit PIN code (numeric) on a small metal bit that came with my keys when I bought the car. If it helps, my car is a 2003 Nissan Skyline V35 Sedan 250GT-"M"), complete with two factory key fobs. Also attached below is the old BCM currently in my car and the new BCM I have received this week (like-for-like).

    Is there anyone in Melbourne competent enough to complete this task?

    Cheers,

    Michael

    post-70239-0-44000600-1435192339_thumb.jpg

    post-70239-0-85317300-1435192344_thumb.jpg

    2003 V35 250gt-m Sedan

    in VQ Series - V35, V36 & Infiniti

    Posted

    Thanks scotty nm35. Thankfully for me, the BCM and combination meter are a-okay. I have found verified on the G35 forums that the V35's and G35's have an intermittent issue with the "ticker" / "buzzer" unit inside the combination meter (speedometer). Sometimes the combination meter doesn't receive "full" signal from BCM. Following the steps below, I have remediated that ticking noise to emulate a turn signal indicator relay:

    1. Turn off engine
    2. Take key out
    3. Open drivers door
    4. Put on either left or right indicator
    5. Put key back in and let it chime
    6. Turn turn key to "ON" without igniting the car

    At step number 6, the indicator sounds as per usual. I have also read from the G35 forums, if you reach step 6 and find that it doesn't work, while the engine is running:

    1. Put the indicator on (doesn't matter left or right)
    2. Pull-off the drivers kick-panel fuse cover
    3. Pull out the 10 Amp fuse that control the turn signal indicators (http://g35driver.com/forums/attachments/audio-video-electronics/79204d1194026302-installed-invisicord-blown-fuse-miles-reset-green-blinker-dash-lights-clock-dead-homelink-fuse.jpg)
    4. Put the 10 Amp fuse back in

    2003 V35 250gt-m Sedan

    in VQ Series - V35, V36 & Infiniti

    Posted · Edited by theponyremark

    Also, everything else in the car works, except for the side indicator ticking/sound. The indicators work as per usual, with no sound. I know it's not the BCM as the indicator lights are working. The key warning chime works and also leaving the headlights on chimes. Nissan Data Scan gives me a generic U1000 "CAN" error. Any ideas? Chris Rogers?

    2003 V35 250gt-m Sedan

    in VQ Series - V35, V36 & Infiniti

    Posted · Edited by theponyremark

    I recently purchased a base model V35. It's got navigation/TV and a single DIN head unit. I'm 95% through installing an alarm system, wired up everything except the door lock and unlock. I can't seem to find anything on the web with a 4 plug BCM with pin ID and functionality. All the references I have found refer to BCMs of non-premium and premium models. I opened the drivers door and tried to track it back but can't seem to find it inside the car. Anyone out there with a workshop manual for the base model?

    post-70239-0-42003400-1427022185_thumb.jpg

    post-70239-0-75370400-1427022232_thumb.jpg

    post-70239-0-44721500-1427022278_thumb.jpg

    R34 Usb Consult Cable (compatible For Nissan's With Consult Port)

    in For Sale (Private Car Parts and Accessories)

    Posted

    Hi Guys,

    Due to a complete incident and write-off, I have available an R34 USB consult cable for grabs. I used this to see error codes, and to see an overall view of the car's health (using ECUTalk). I even used it to reset error codes (e.g. engine light using Nissan Data Scan) after replacing an O2 sensor. This cable has served my R34 GT-t very well over it's lifetime. Thanks to the idiot who rear-ended me, I'd like to pass this cable on to help other Nissan's out there.

    I'm asking for $55, including postage from Sunshine West.

    Thanks,

    Michael

    R34 Factory Triple Gauge (complete With Housing, New Led's & Screws)

    in For Sale (Private Whole cars only)

    Posted · Edited by theponyremark

    Hi SAU,

    As per topic title, I've got an R34 Factory Triple Gauge Complete with Housing, new White LED's & Screws.

    I think $200 is a fair price for pick-up. An additional $20 for postage and postal insurance in Australia. I won't post this internationally.

    I'm located in Sunshine, Victoria and can be reached on 0432 518 129.

    Thanks,

    Michael

    NlVmjJa.jpg

    What's This Window Trim Called?

    in Cosmetic, Styling & Respray

    Posted

    Thanks guys for your input. Very valuable information :)

    I tried both Megiuar's products which did not change from it's original state. I think I need to wet sand it back with fine grit paper and then spray paint and re-clear coat them. $366 is still too steep for a bit of trim and hopefully the DIY job would only cost me a few days of manual labour. Looks like I will need to buy couple of extra 3M edge masking tape.

    Thanks for the offer mungy. I will definitely buy it off you if this goes wrong :)

    R34 Gt/gtt Parts

    in For Sale (Private Car Parts and Accessories)

    Posted · Edited by theponyremark

    JJR Nissan R34 GTT "GTR Style" Front Lip, brand new. Also fits R34 GT: $120.00

    99GTT--NS--FBL.jpg

    -------------------

    1. SOLD Genuine factory triple gauge plastic cover (current paint job on it is fubar, thus requires quick sand back, prime and respray or carbon vinyl wrap): $20.00 plus postage
    2. Fibreglass Bomex rear bumper bar (good condition, currently has gel coating, requires fitting, quick sand and spray): $140.00 plus postage
    3. Genuine factory R34 GT snorkel and airbox (in good condition, excludes air filter, this is for non-turbo): $50.00 plus postage
    4. Genuine factory R34 GTT BOV (in great condition, off R34 GTT at 65,000KMs, does not include piping, no gasket - reuse your own): $50 plus postage
    5. SOLD 2x Licence plate bolts for GT/GTT (brand new): $3 postage inclusive
×
×
  • Create New...