-
Posts
451 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by Chris32R
-
-
Rods sold. Throw me an offer on the rest. No longer have a GTR so parts must go!
-
-
sold pending payment
-
Sard Stack Display R32 GTR and GTST
Selling my brand new Sard Stack Display Meter to suit R32 GTR and GTST
It comes with the optional lap timer beacon and infrared receiver so that the display can read put lap times at any circuit.
Comes with mil spec wiring loom, analogue to digital speedo conversion, solid state sensors for fuel pressure, oil pressure, water temperature and oil temperature. Carbon fibre composite case and carbon fibre housing which firs perfectly without modification.
More info can be found here:
http://www.stackltd.com/st8100.html
RHDJapan pricing without lap timing kit, shipping and taxes:
https://www.rhdjapan.com/sard-stack-meter-st8100.htmlasking for 2000$ono delivered Aus wide.
Thanks -
-
Carrillo Pro H Rods with CARR bolts
Possibly the best rods you can buy before going titanium.
These are the Carrillo's Pro H, H beam rods with upgraded Carr bolts (leagues ahead of the ARP variant).
Carrillo rates these at 275hp per rod!!!
Made in the USA. ALl info can be found here:
http://www.cp-carrillo.com/pt-3508-rods.html
Price is $1700 posted AUS wide.
To suit standard stroke RB26
Thanks -
GtX2863R twin turbos
Selling my brand new Garrett GTX2863 turbos which have had plenty of work done to them to make them the best option for bolt on twin turbo options.
I've had 2860-5 turbo front housing covers professionally milled by GCG turbos to suit the GTX turbo front compressor wheel so that factory or bolt in aftermarket piping can be utilised with the GTX turbos.
Brand new 2860-5 rear housings were bought and ported to allow maximum airflow into the GTX turbine wheel. The port is a perfect matcgh for the 6boost twin turbo manifolds which I also have for sale.
Turbonetics dual port wastegate actuator was installed to help control high boost pressures while still allowing an external boost controller to have a wide range of adjustment in boost range.
The turbos are fitted with AN oil feed, drain and water fitting so braided lines can be used on the turbos if desired, otherwise they can be removed and used with stock lines if desired.
These turbos have been proven to make 700hp atw with a stock locking engine bay and great response as expected from twins with billet wheels
Price is 3000 posted australia wide. Thses cost me a fortune to have built and they are still brand new in the box. I can do a deal if you buy the 6 boost manifold with the turbos.
I also have numerous other new engine parts, PM me if you require anything.
Thanks -
Are you sure you connected up the dual ports on the turbonetics correctly?
They shouldn't leak if pressure is applied to both sides of the diaphragm as far as I'm aware
-
Hey,
Are these new or used?Cheers
-
3500$ for a spoiler! Don't think the roof would be any cheaper
-
Is the turbonetics actuator any better than the ones hks offer?Well I for one am very impressed. Thats a fantastic power curve.
Its a prick of a job, but i have done it on my hks2530s, turbonetics make an oem size dual port actuator (part is 30326) that fits the hks actuator bracket. Need 1/4 UNF 80mm actuator rods from gcg for it to fit, and a 4 port mac valve but its a good option to keep the gate shut.
Are your gates creeping open at high exhaust manifold pressures or are the turbines just falling over?
I guess at those flow rates your post-turbine exhaust pressure becomes quite significant.
-
This is the first time I've seen CP pistons and junk used in the same sentence.
Never heard of anyone having issues with them until now?
-
Sorry to hear bud. Hopefully karma gets the assholes.
I'm looking at getting my set enlarged soon too. Is there anyone other than efi hardware able o get this done for cheaper? Over $800 with postage each way send a bit steep.
-
Saw this turning off Marmion onto Karrinyup road on Friday, looks mint dude. The rims suit the car perfectly
-
Hey guys,
I'm selling a Tomei Titanium cat back exhaust system to suit R32 skyline.
The whole system is in mint condition and has very minimal use since being purchased about 12 months ago.Going custom so this is no longer required.
I'll try get pics up tomorrow, the system is the same as this one
http://www.kudosmotorsports.com/catalog/tomei-expreme-titanium-back-exhaust-system-440009-nissan-skyline-rb26dett-p-1203.html
Price is $1100 firm.located in Perth. Can post at buyer's expense.
Cheers -
-
You relay is melting internally, seen it many times.
The coil on large relays needs over 12V to hold the contacts in hard, the car is only supplying 8 or 9 volts sometimes.
Hmmm so that's why my 40 Amp Narva really never ticked over with the ecu signal but the OEM one did
-
Even that's pushing it
Ive made 400kW with id1000 injectors on E85 with -5s. I think there was a bit left in them too because the tuner didn't mention anything about them being maxed out
-
Out of interest, how did you wire it for it to fry itself?
A quick update to this thread, I ended up getting a Do-Luck DTMII and blew it up trying to wire in the throttle cable
Now I'm the market again for a g sensor. Is there any new products on the market? The Skylab looks interesting, anyone got one?
Is it PnP?
-
-
Hey guys,
Selling a complete set of R34 GTR candy apple red engine covers. These were bought brand new from Nissan a couple of years ago and have only been installed for about 2000kms. The cam gear cover is unused as I never ran the car with one and the spark plug cover has only been used for a few months for the same reason. The cam covers have mines baffles and plates installed to help prevent blow by. Speedflow -12 fittings have also been installed. They've been drilled and tapped in with a npt thread so that bonnet clearance is greater than normal, perfect for someone running an rb30. There's slight scratches on the back of the cam cover from slight rubbing with the loom.but this obviously can't be seen when installed. You can also see in the photo of the right cam.cover has a small mark where a slight spot of pain has come off. This is due to the greddy piping kit I had installed rubbing on it causing it to come off. Other than that these covers are in new condition as you'd expect.
Located in Perth but happy to post interstate or overseas if required.
Price is 600 firm.
Cheers
-
I've used both these companies with success
From Aus;
https://www.efihardware.com/products/c293/ConnectorsFrom USA::
-
-
Price drop $480
Brand New OEM R32 Skyline Parts
in For Sale (Private Car Parts and Accessories)
Posted
Selling a few brand new Nissan R32 Skyline parts that I have left over from a previous build.
1. Brand New Nissan R32 Skyline instrument cluster plastic. Part number 24813-05U00. Perfect for replacing your scratched, marked or less than perfect instrument cluster clear plastic. $300
2. New OEM Nissan RB26 cam cover gaskets including half moon seals and camshaft seals. $70
3. New OEM Nissan R32 Hardline Brake Lines. Part number 46245-05U01 and 46246-05U01. $100
4. OEM RB26 Rear Main Seal Retainer. Part number 12297-22J00. $50
5. Nissan OEM Fuel Filter. Part number 16400-53J10. - $20
6. Brand New RB26 cam cover bolts with good condition used cam cover washers. - $20.
Parts are located in Perth for pick up or can be posted Australia wide.
Thanks