@irborne

i did some tests and no power is going to the injectors. i might be missing a wire that feed power to the injectors.

Hi guys, i did a swap rb20det (silver top) into the s13, wiring seemed ok, except the injectors are not spraying. the motor runs if i spray some starting fluid into the intake manifold. it runs for a few seconds and stop. fuel lines are pressurized, registering at 40ish psi; the feed line and return line are connected correctly. can someone confirm with me which wire powers the injectors? (Mods: I'm not sure where this post should go, but I'll try here.) thanks, dan

for the RB20det: i'm replacing the stock turbo w/ a T3/T4 and I'm running a new AN-4 stainless steel braided feed line for the turbo; I need an adapter/fittings to bolt onto the block where formerly the turbo feed line banjo on connect to and accept the AN-4 line. any suggestion guys? thanks.