shnaped_second
-
Posts
1,158 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by shnaped_second
-
-
Here is my result only running 8psi for run in tune. Motor is a 2630 forged bottom end, built head fully ported oversize valves ect. Running a forced performance super 94 with 1.14 exhaust housing on 6boost t4 twin scroll 4" exhaust also haltech plug-in pro on e85
-
2
-
-
Old thread but here is a super 94 on my 2630 build, only run in tune thats why its at 8psi. Not as laggy as i first thought
-
2
-
-
Hey guys just got my car tuned at horsepower solutions and wanted to share my results from this trigger kit. Brief description is its a r32 with fully built 2630 running a forced performance super 94 with all supporting mods. I used a ross balancer and trigger wheel with murrayis kit. Worked a treat with only thing to do is space it apart with shims. Below are some pics
-
R32 gtr radiator $50
R32 gtr fuel tank with fuel pump $250
R32 gtr air con compressor $50
R32 gtr fan $20
R32 front strut brace $50
3" straight through muffler $20
Universal radiator overflow $50
Universal power steering reservoir with an6 and an10 connections $50
Au thermo fans have been trimmed but too big for my use $50
Located upper coomer gold coast
-
-
-
I have a compressor but have thrown out everything else
-
As the tittle states im chasing r32 gtr fuel tank straps and wiring connections, anyone wrecking a gtr or know of one
Thanks
-
As the tittle states im after a r32 m spec front bumper, located gold coast
-
If you get something made up, remember it needs to have the missing teeth for reference, I have 280-290 missing from memory
Mine is a 36 - 2 wheel, also you need to make sure that the wheel is balanced and not too thick as it will foul on the front timing cover
I used 6mm but I put mine on an ATI balancer but measure your own
Are you using a Ross trigger kit? Ensure the wheel runs directly over the sensors, around 2 mm spacing mine is from memory.. Too close or too far and it will not work properly.
It's a big job man
Im running a platinum pro so i can only run 24 + 1, using a murrayis kit and the cam side is already fitted with 1gt101 just need to remove the balancer and fit a wheel, the ross wheel doesn't have a missing tooth And lots of kits people have made or used dont have them missing either... not to sure if there is any problem with that?
-
Spoke to ross already, $340 plus postage which made me fuxking lol, thought id check here before i got something made
Cheers
-
-
Hey guys what im after is the wheel that mounts to the back of the ross balancer, the balancer is about a year old and i have attached a picture. On the gold coast but will pay shipping.
Thanks
-
dont need a fuel pump but must have the pump assembly
Cheers
-
Hi Guys,
Sorry I've been a little busy of late.
The M7 Countersunk bolts are hard to fine however not impossible - If you cannot locate you can use a spring washer and normal M7 cap bolt in it's place which will hold it securely.
I have this kit running on my car so it works with no effort what so ever once you've plugged in the tooth and TDC offset into the ECU.
You will need to cut your cover or leave it off all together. I've had my cover off for year without any dramas.
Hi Cameron
Is there any difference in what the sensor reads with these two types of wheels? not being about 6 vs 12 points but in yours having it cut out compared to this chopper wheel having points, just wanting some ideas before I get something made up.
Cheers
-
As the topic states im chasing a r32 gtr plastic fuel tank, not after the steel tank as ive had 2 of them rust on me, interstate ok but wont pay ridiculous price, prefer local bris/gold coast.
Cheers
Brad
-
Anyone used the crank trigger mount with a ross balancer? I have a metal jacket so i was wondering if I could use the bracket with the ross balancer, they should sit roughly in the same position and i might get the chopper wheel made for it as ross wants $340 and i dont think it should be that much to have a piece of steel laser cut to the size i need.
-
-
Pm's replied, haltech sensor sold
-
Hks rail sold.
Still for sale
Hks shield $150
RB26 plenum with throttles $300
Aftermarket Industries mount $50
Z32 afm $200
Ghost auto filter $50
Haltech sensor $50
Will include postage
Cheers
-
-
044 sold
Here's a pic of the rail with all the fittings
-
-
Injectors and 1" filter sold
Forced Performance Hta Turbos
in Forced Induction Performance
Posted
Hey mate sorry dont come in here much anymore, haven't done anything with the car yet still sitting here had a few things come up, had a new born last week so sort of on the back burner atm