32rrr
-
Posts
146 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by 32rrr
-
-
Location Might help as i'm either going blind or suck at mind reading.
No Seats & no door trims --- when and why did they go elsewhere....
Are you willing to go over the car with a fine tooth comb and a camera for me to check all the usual signs of rust...
Is the Chassie bent in any places?
-
-
-
Located in Darwin so prices include Freight Australia wide.
-
Due to upgrades i have for sale 2 crank angle sensors with modified trigger discs these work really well with Aftermarket ecu's and allow a much more stable crank trigger much cheaper options compared to the Ross trigger kit and other options out there.
1x R34 Crank angle sensor with a 24+1 Trigger disc - $300 - 24+1 Config for Haltech PS2000
1x R32/33 Crank angle sensor with 6+1 Trigger disc - $300 - Full cycle config for Haltech PS2000
Both crank angle sensors are in perfect working order - Located in Darwin so prices include Freight Australia wide.
-
If the turbo is internally gated, check that you havent wound to much preload onto the actuator causing it not being able to open far enough to bleed boost off.
-
No. Wont make a difference.
-
and most of them leak due to using a porous alloy
All alloy is porous..
-
How much for a nice oil catch/washer bottle combo for a r32 gtr rb26dett?
Only just saw this as i've moved interstate, will work it out and send you a message. sorry for the delay i'm now located in Darwin.
Interested in a catch can to sit in front of the battery of my 32 gtr.
Question, are yours baffled?
Also interested in awd sump. 8-9l baffled
Yes i baffle the catch cans, and Can no longer do the sumps on exchange basis as i dont have any spares. will pm you aswell.
-
Nah wasn't me it was probably a bloke called David lol.
My car is off the road at the moment getting a new turbo upgrade so hopefully will be out and about again soon. One of your catch cans would finish it off nicely I reckon
If you're serious about a catch can PM me, I've just moved up to darwin and have a little bit of time to do small fab jobs. Also check my thread in the fabrication section if you want to see previous work i've done.
-
Am i reading that correctly? You want 450 for the power steering pump? I paid $80+freight for the last one i got. If you decide to be a bit more reasonable on the pump send me a message. can always do with a spare.
-
-
Need these gone!! Pm serious offers.
-
Looking at them does cut it if its just popped a hose...
-
Works been extremely slow for me down and i'm running out of stuff to make and do to keep myself occupied as i just finished up a massive build for a mate of mine. If anyone wants little things like Catch cans, Overflow bottles, Washer bottles, Power steering reservoirs and custom surge tanks made up, Radiator header tanks. Rb26 RWD and 4wd extended sumps(can do sumps on exchange basis if urgent as i do have a spare standard rb26 sumps)
To save the question being asked about bringing the car to me, I'm located in cairns so just send me a message and i'll see what i can do to help out. I have access to a 32 and 33 and s13 and possibly a r34 gtt & S15 for mounting points and what not.
Obviously due to every car being different i can't do exhausts or intercooler piping as everyone has different ways and positions of mounting there coolers and that screws shit up bigtime.
I do however have spare heads/blocks for dummie up and making or modifying turbo manifolds and can quite easily do a Balance pipe mod for rb26 low mount manifolds if you're having that nasty turbo shuffle problem.
And no i am not a business and don't intend on turning this into one. I'm not expecting this to get a huge response. Just simply a few small cash jobs to help cure my boredom while work is quiet.
split pulse t04z rb26 manifold - Cant find completed pics.
power steer reservoir were charcoal cainster use to be.
undercar r32 gtr surge tank.
Catch can/radiator breather setup
Sump extension and Balance piping a set of tomei expreme manifolds(will add finished picture this arvo)
-
Looks good, try stepping up to 3mm for items like these, makes life a hell of alot easier and you dont need to worry about a foot pedal for the tig, I'm a boily by trade who does way to much tig and i f**king hate foot pedals. If you're having lots of problems with heat soaking the material my advice is to Tack it how you want, than put a solid tack on each outside corner were the 3 pieces of material come together than its simple a case of welding from one tack to the other and blowing the material offf with an air gun inbetween runs aswell as dropping the amperage a a touch after the first few. If you feel its getting to hot Let it sit there for 10-15 minutes inbetween runs.. Take your time and be patient.
-
1
-
-
I really shouldnt, but can always do with a spare, i'll take the crank angle sensor. Pm'd you.
-
-
Trade for r33 Gtr wheels and bit
Of cash. Pm me if interested
sell to dude below than pm me.
Im looking for r33 gtr wheels pm me if any for sale
pm him if you want 33 gtr wheels, i'm not after swaps.
-
It does, the 2 hoses on the bottom can be a prick to get to.
-
I have a few of them laying around if you want a replacement.
-
-
-
Yep spot on Terry!
And still for sale so bump!
Wts Urgent R32 Gtr $16k Nsw
in For Sale (Private Whole cars only)
Posted
Photos of damage.. before and after repairing prefered!