Hey guys, I'm new here. Big question, have done a search. Found nothing.
Here goes, hopfully some one has a clue.
I'm trying to avoid posting a video..
So end of last year, I decided to go the waste spark set,
because I had given up with the awful underload/rev missfire.
After reading lots of love it or hate it.
As far a I know, i've wired it all up correct. power is getting to where it
needs to go.
First start after installed it turns over, idles and runs. No misfires or anything.
Now the fun.
Boost gauge reads in bar, so bear with me.
From 0 to .5 boost it runs clean through. Any more than .5
All hell breaks loose, it just cuts out like speed cut but worse.
(This is hard to explain)
It wont rev or come on any more boost, under load. i.e foot flat.
Now, in a 2nd gear pull, with light throttle it will rev all the way to rev cut
with no fuel/boost cut at all.
Quick summ.
Light load, 2nd gear, revs fine.
Under full load, .5 bar/4k RPM boost/fuel cut. wont rev or boost anymore.
Run Diagnostic, came back everything is ok.
Need help because I want to make sure it runs on waste spark before
I change it back to coil.
Thanks.
