Jump to content
SAU Community

Nissan Maaaart

Members
  • Posts

    85
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by Nissan Maaaart

  1. Hi mate - are you able to advise if you still have these - as i'm wanting to pickup, could you give me your number ?

    selling the stock wheels that came on the car, series 2 R33. Rims are in VGC, no marks or damage. Tyres are Federal somethings, will have a look tomorrow and post model/photos, but they have TONS of tread, i would say about 90%. Full set of four, all in similar cond. Located in Wilston area, just north of CBD Brisbane. Looking for $200 the lot ONO.

  2. Thanks buddy - but unfortunately didnt' help just this time :blush:

    Does anyone have a picture of where the lower timing mark is on for the Crankshaft Pully?

    Does anyone have any recommendations for Mobile Mechanics - or Decent shops on the Northside of Brisbane that know about these RB's or have further testing equipment.

    As I've wasted too much time in replacing and testing items, and I'm at the point where I need this vehicle going, or an evaluative messure on what is going wrong and how much it will cost to fix?

  3. Hi there Guys,

    Dont know what else i can do --

    I've replaced Fuel Pump, put new vaccum lines on everything, swapped AFM, CAS, Cleaned AAC, New Plugs, New Fuel Filter, New AirFilter. New Fuel Pressure Reg.

    ODB says the ECU has no Error codes.

    Car is still not firing.

    I did get it to fire for 10mins the other day by clamping the return line passed the one-way diafram mounted on the drivers side strut tower.

    The car didn't respond well to accelleraor actions stalling the motor.

    Any Ideas - I'm ready to blow it up.

    Righto -- Scrap that -- Car seems to have some timing issues- but unsure where the lower timing mark is - as the Timing belt casing is all munted up. ODB seems to say that the Defaut Timing is 20BTDC and then when the car had run will run okish at around 30BTDC which is 15deg out of standard - I have lined the top up and everything seems to be good - but when the timing light is on all the marks on the lower pully are all the way to the right (half way around is the first marking on the pully).

    Does anyone have detailed instructions on using ODB?

  4. Hi there Guys,

    Dont know what else i can do --

    I've replaced Fuel Pump, put new vaccum lines on everything, swapped AFM, CAS, Cleaned AAC, New Plugs, New Fuel Filter, New AirFilter. New Fuel Pressure Reg.

    ODB says the ECU has no Error codes.

    Car is still not firing.

    I did get it to fire for 10mins the other day by clamping the return line passed the one-way diafram mounted on the drivers side strut tower.

    The car didn't respond well to accelleraor actions stalling the motor.

    Any Ideas - I'm ready to blow it up.

  5. just unplug the AFM and see if it idles

    the engine will run with no AFM and should idle OK, but it wont drive very well and will rev cap at 2500RPM

    if the AFM is the culprit when you unplug it, it should run to normal idle

    if the AFM is NOT the culprit when you unplug it, the same problem will be present and it will stall

    Hi buddy,

    The vehicle wont even start - or run enough to test this theory.

    I'll try the fuel line thing shortly.

  6. Righto - Still Not anywhere -

    I've replaced - all clamps, enusres tight- checked Cooler for leaks - new fuel filter -

    And still no go - does anyone know how much New AFM's are and where to get them -- as I got a price from a crowd and it seemed a little steep at 780$ex out of Melb.

    Or does anyone on the Northside of Bris have a 3 pin (Pink Lable) AFM that is known good that i could try?

    Thanks.

  7. id go for fuel pump.

    They can throw up an array of symptoms but seem ok with prelim testing like you did.

    Otherwise vacuum leak...

    Thanks mate, I've checked all the Intake piping and there is no apparent air leaks - does anyone know what type of presure should be coming from the rail --

    I also did some further testing and with doing the following - blocking the Intake - and allowing a small vaccum of air into the AFM - the car would start with timing retarded - engine would fire on it's own for a moment - but if i removed my hand or made the vaccum less the engine would stall --

    The suction from cranking felt quiet faint - can anyone comment on this?

    Thanks.

  8. whats it like when its warm?

    is it on a stock ecu?

    if its always idling very low and is on a stock ecu, perhaps try to adjust the idle up a touch. theres also a mixture screw on the back of the ecu that you could fatten up a touch, that makes them run a little easier when their cold. But if you add fuel on base idle you will also want to up the idle screw.

    GL

    Hi mate,

    The car seems to be racing when warm - sitting just shy of 1000rpm - when spec say's 650+/- has a slight sputter every now and again.

    The ECU is a completely sealed unit with no trimpod for adjustment. I also checked for Dry-Solder in the AFM - and everything checks out there = ECU still giving Codee 55 = All Ok.

  9. Hi there Guys,

    It's been a while since i have posted a question and i have done some searching through the forums but i can't seem to find what i'm looking for.

    Problem -

    1995 Series 1.5 Skyline RB25DET

    * Issues started with low idle - and engine stalling when cold (By the way it's an automatic) Engine would stall if any load was put on it.

    * Investigated timing and all timing marks line up for 15Deg

    * I've had fun by doing the following - re-Gapped sparkplugs; Got a 2nd hand CAS; Got a 2nd hand AFM; Brought new plugs

    I've just been playing with the car today and managed to get it firing by itself but i had to hold my hand over the AFM to restrict the flow Engine was able to idle for 3-5secs before stalling again - I repeated the process and when firing took my hand off and died -

    I'm thinking in my mind the following -=-

    Either I have a break in the pipe work (Intake) but when i had my hand over the AFM the pipe was sucking in and i couldn't hear any other air. Or the AFM is cactus.

    Does anyone have any other thoughts -

    Regards,

    Ashley Neal.

  10. Silhouette Skyline GTS Pictures

    Up for Sale is a Rare R31 1988 Skyline Silhouette GTS ( Series I )

    CAR IS AVAILIBLE TO BE INSPECTED

    Silhouette Skyline GTS Pictures

    Very Original Car - Bar some slight changes,

    Car is Located @ Moggill, (Western Brisbane)

    Currently Registered till the 2nd Month 2007

    White - Sedan

    Original 16" GTS Mags, have been re-powder coated

    Brand New C-Drives that have only Travelled 2000KMS

    Borg LSD Still Tight

    Replaced All Decals - With Replica Decal Set -- Thanks To a Nissan SVD Club - SA Member

    HeadLamp Protectors

    Tidy Up On Door Edging - Re-Sprayed MAT Black Finish

    Dash Mat

    Trip Computer

    Travelled 172555KMS - Speedo Just Stopped Last Week When Reseting Trip Meter -- (Suspect Trip Cog) 02/11/2006

    Suspension Firm Solid

    Tow Bar - Tow Ball & Tongue Not Connected

    Central Locking

    Cold Airconditioning

    Straight Body -

    Paint Condition -- Little Thin In 1 or 2 Places But As To Be Expected For A 18yr Old Car

    3¼" Exhaust System -

    Standard GTS Extractors

    JVC SD/CD Radio/Stereo

    4 New Pioneer Speakers

    5spd Manual

    Power Steering

    Momo Steering Wheel -- But Not Gen. SVD Momo Wheel

    Interior - Excellent Condition -- Slight Wear On Drivers Bucket Edge

    Will Pass RWC Easily

    If You Are Interested You Can Arrange To View Car Before Auction Ends -- Send Message To Arrange Time -- View After 6pm Most Nights And On Weekends.

    Contact Chris -- 0404-832-376

    Silhouette Skyline GTS Pictures

  11. Sounds good i'll take a burl over there 2morra - it's only 15mins away

    Thanks.

    I think one of the other guys got his replaced at Novus @ Burpengary if i remember correctly, I don't think they are the same as a R34 but I've talked to this guy and he tells me he can get a windscreen for a stagea, somewhere around $300 fitted, but don't don't quote me on that.

    Beastien.

  12. Hi there folks,

    I have had an incident with a large stone chip which has cracked the windshield on my 1996 Stagea,

    Could anyone please tell me who in brisbane will replace window, as i will be doing it through insurance ,

    I heard on the grapevine that these front windows are the same as R34 ?!? is this correct,

    If anyone can help please post details of places as i would like to get this done for this years window on my policy /?

    Regards,

    Ashley Neal.

  13. Can, Anyone tell me a place that does reasonable work on suspension for Stagea's and Skylines ?!?!

    As i need to get somethings replaced - ie ball joints, casters, shockies etc. And would like to find a place that works with the imports rather than finding a near enough close enough match..

    Regards,

    Ashley Neal.

  14. 1 Month Old -

    *Intel Pentium M 1.8GHz

    *512MB DDR Ram

    *40GB HDD

    *CDRW/DVD Combo Drive

    *Intel Wireless 802g/b

    *14.1 Super XGA TFT

    *56K Modem

    *10/100 Network

    *1.44 FDD Via USB Cable

    *Carry Case

    *All Disks

    *Windows XP Professional SP2 Loaded

    *2x Power Supplies

    *USB Support

    *Serial Port x 1

    Contact Ashley - 0413-491-847

    PAID $3500

    Selling For $3000

  15. Hi there Guys,

    Just an Expression of Interest, as i'm thinking about selling my Stagea -

    It's a C34 1996

    *Original 38,000kms

    *RB25DET

    *RS4

    *Dual Sunroof

    *40Chnl, UHF/Scanner

    *Car Kit For Nokia 51xx/61xx/63xx Series Phone

    *Maroon

    *Vel Interior

    *4spd Auto

    *Very Nice Car, and only reason to ask for the EOI is that looking at finance options.

    Just wanting to know what people would be looking at paying for this and the level of interest in the possible new year.

    Regards,

    Ashley Neal.

  16. Well I have my red beastie its great looking at doing a couple of things to it. it's a bit dicy on the fuel econ. :D

    I have seen a couple in brisbane and one silver one with a sheila driving it in Toowoomba

×
×
  • Create New...