Jump to content
SAU Community

-Tom

Members
  • Posts

    209
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by -Tom

  1. R32 GTR air con compressor rebuild?

    G'day, looking for recommendations for an air con rebuild for an R32 GTR.

    Asked for a leak test before finally getting a regas, turns out it's leaking from the compressor. The shop says it won't touch imports though because the parts are going to be hard to find.

    Now I'm looking for a place to help me out.

    Any info would be appreciated.

    Thanks

  2. On 1/18/2017 at 10:19 PM, BoostedBarge said:

    Awesome thread! I just bought an R32 GTR and the aircon was only blowing the windscreen and was not cold at all. I discovered the aircon relay was dead (900 ohm across the coil). A friend gave me one from his GTR and it measured 60 ohm. Now I can hear the compressor kick in. I removed the mode selector motor and hooked it up to my bench top power supply. It moves, so I moved it to a position where it was shorting one of the "combs". Installed it back into the car and it works! The aircon is cold, but not icy cold. I think during the sun it will not be good enough.

    I ran the tests and get no fault codes. The temps as 32,32.5,25, 4-10. Is the refrigerant temp too low or is this normal? It was reading much higher before I fixed the relay.

    I haven't yet checked if my temp control door is working correctly, but I know for sure that is directs hot air at my feet if I set the temp to 32.

    Temperatures look okay.

    My aircon seems to be cold when it's below 25 degrees but when it hits 30+ it won't cool the cabin..Does anyone know if this is a sign of low refrigerant or if my compressor has just carked it?

  3. On 12/2/2016 at 9:29 PM, -Tom said:

    Could you link me where you ordered it from? I've been trying to revive old blend door motors to no avail and can't find the specific actuator either.

    I opened it up and re-soldered the pins on the actuator and it works again 

  4. On 11/26/2016 at 9:14 PM, SiR_RB said:

    Ah yep mad thanks for that

    seems like my values are fine but blend door motor isn't working so just ordered a new one from Nissan via japan

    should be here soon

    Could you link me where you ordered it from? I've been trying to revive old blend door motors to no avail and can't find the specific actuator either.

  5. ITEMS LOCATED IN EASTERN SUBURBS MELBOURNE

    ITEM: Custom dump and front pipes to suit RB26. These were taken off -5s so it should fit most applications.

    Bell mouth dump pipes into custom front pipe which measures 3" into a 3.5" Y-pipe into a 3" flange.

    These came off a 320kw GTR.

    CONDITION: As seen in photos.

    REASON FOR SALE: Bought these on a whim, never bothered to have them installed because I'm not making that much power anyhow.

    PRICE: $250 for both

    R32 front pipe - Copy.pngpost-1670-0-68576100-1374710144.jpg

    ITEM: Power FC L-Jetro (PFC GTR33L 020-0992) with hand controller

    CONDITION: Good; been bubblewrapped and stored away. Have not had it installed/tuned since I bought it.

    REASON FOR SALE: Not chasing any more power, not being used. Came off a 320kw R32.

    PRICE: $850

    14489047_10153885664442918_1490801873_o.jpg

    14424201_10153885664392918_1805748313_o.jpg

    14454022_10153885664397918_1185051153_o.jpg

    Please PM if interested. Thanks.

×
×
  • Create New...