mdillonmining
-
Posts
31 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by mdillonmining
-
-
Thanks Rusty, I've already got that the mil light changes from a orange with black stripe I'm thinking it may turn into orange but that's going on S13 wiring n it could be any colour really I'll grab a test light on the weekend and post a pinout ... Also anyone know if the Speedo needs a AC wave like the S13 or if a square wave is fine
-
Hi, I've been searching with no luck around the web, I'm trying to find out pinouts on the f3 plug for an engine conversion
if anyone can have a look or trace the ecu plug to the f3 plug
just need vss speed/ revs/mil / dash temp and ignition might aswell put fuel pump for future reference for others
just doing a engine conversion sold the main engine loom with the engine
I am pretty sure yellow/green is speed and yellow/red is rpm not sure on mil light or temp any help would be wonderful thanks
-
-
Just a heads up for anyone Looking at doing the kingpins that Kudos have them for $85 / side
-
wish to buy a set of rb26 rods
-
-
Sorry forgot to add the specs
Duration Intake: 260
Lift Intake: 9.15mm
Part #: 143018 -
Brand new unopened Tomei type b intake camshaft poncam $330
Rb26dett solid lifters with shims $200
Pickup gold coast or can post auswide $20
-
-
pm sent would you take $100 for rb26 IAC valve with the air chamber ( part # 23781-05U11- and 14066-05U10-)
-
Would you take 320 for the intake can pickup today or anytime during the week
-
Would you take $70 for the tyres would need to freight them up to gold coast can organise that if you can tape or secure them together so there right for freight let me know regards matt
0431160814
can bank transfer or paypal and ehen suits for curiour to pickup?
-
Would you take $1000 for it can pickup next friday or on the weekend
-
For use as a blanking plate for a Craig Davies pump so going to cut the impeller out n weld it need one to fit an rb25 think there all the same on the gold coast either pickup or outpost bag it pm me thanx
-
HKS twin BOV for Skyline GTR off a r32 .. $140
Payment pending HKS GT-SS Twin Turbo's 5000km's old these are HKS not Garrett asking $1400 ono
Nissan GTR RB26DETT Stainless Steel Exhaust Mainfold Kit new $90...
GTR RB26DETT stainless double dump pipes new never used bought from 999 auto $150
RB30ET A8 Short engine from VL Turbo ... $200
twin 3" Dump pipe back Stainless Exhaust System R33 GTR catless straight though twin 3" ID with JUN mufflers asking $450
GTR intake Assembly Plenum, throttle bodies, linkages etc $350
GTR RB26 IAC, Cold start air reg and Vacuum Box $100
SOLD - GTR Piping set from AFM to plenum including hard pipes off turbos from a r32 $150
R32 GTR ECU has been socketed and currently has a tune for 555cc inj poncams, GT-SS/N1 Turbo's exhaust, inc fuel pressure also have a mines rom for stock inj $120
-
HKS twin BOV for Skyline GTR off a r32 .. $140
Payment pending HKS GT-SS Twin Turbo's 5000km's old these are HKS not Garrett asking $1400 ono
Nissan GTR RB26DETT Stainless Steel Exhaust Mainfold Kit new $90...
GTR RB26DETT stainless double dump pipes new never used bought from 999 auto $150
RB30ET A8 Short engine from VL Turbo ... $200
twin 3" Dump pipe back Stainless Exhaust System R33 GTR catless straight though twin 3" ID with JUN mufflers asking $450
GTR intake Assembly Plenum, throttle bodies, linkages etc $350
GTR RB26 IAC, Cold start air reg and Vacuum Box $100
SOLD - GTR Piping set from AFM to plenum including hard pipes off turbos from a r32 $150
R32 GTR ECU has been socketed and currently has a tune for 555cc inj poncams, GT-SS/N1 Turbo's exhaust, inc fuel pressure also have a mines rom for stock inj $120
-
-
the exhaust includes front pipes I do have dump pipes for sale aswell I'll take pics of the exhaust and upload them in the next hour or 2
-
Garage plean out selling parts not needed as going to a single turbo build instead.
Located on the Gold Coast, QLD will post Australia Wide. PM me.
HKS twin BOV for Skyline GTR off a r32 .. $140
HKS GT-SS Twin Turbo's 5000km's old these are HKS not Garrett asking $1400 ono
Nissan GTR RB26DETT Stainless Steel Exhaust Mainfold Kit new $90...
GTR RB26DETT stainless double dump pipes new never used bought from 999 auto $150
RB30ET A8 Short engine from VL Turbo ... $200
Have a twin 3" turbo back Stainless Exhaust R33 GTR exhaust system catless straigh though twin 3" ID I'll take some pics if anyone is intrested asking $450
GTR intake Assembly Plenum, throttle bodies, linkages etc $350
GTR RB26 IAC, Cold start air reg and Vacuum Box $100
GTR Piping set from AFM to plenum including hard pipes off turbos from a r32 $150
R32 GTR ECU has been socketed and currently has a tune for 555cc inj poncams, GT-SS/N1 Turbo's exhaust, inc fuel pressure also have a mines rom for stock inj $120
Any Questions PM me can post all the small stuff aus wide pretty easy the bigger stuff would prefer pickup or go to e-go.com.au to get a qoute for freight for engine or exhaust recommend depot to depot as is 1/3 of the price of door to door service and can drop it off at the depot no probs.
-
What size is the outlet have a full twin 3" system n looking for dumps to fit
-
already have the intake side are you willing to seperate them if so let me know a price
-
will you take $800 for the head without the coils looking at the pics need to resurface and machine the cam bearings which means a full rebuild and head straightening
-
hey zach sent you a text about the intake
thanx Matt
-
I'm chasing a speed sensor from either a R33 GTR or a Stagea(any)
also chasing gear rubber boot either skyline or silvia/200sx etc the big surround rubber boot with 4bolt metal bracket
R33 rear lower control arm length
in Suspension, braking and tyres
Posted
Hi just wondering if soneone could tell me the rear lca length from the ball joint to centre of front and back bushs for either an r33 s14 or s15 bad alignment need to reset lca beror setting bumb steer otherwise is anyone has hub to hub mesurementz for a r33 gtst