[Inlet plenum -gasket, glue or both?]

Thanks lads. Looks like cometic are the easiest to get hold of at a good price on an mls. Thoughts?
Then I'll just put a smear of sealer round the water ports only.

[Inlet plenum -gasket, glue or both?]

MLS or tomei then. Stock gasket is just paper. Presume that's why they used sealant?

[Inlet plenum -gasket, glue or both?]

One of them for an rb25 head and no sealant hey piggaz?

[Inlet plenum -gasket, glue or both?]

Hi all, replacing my Inlet plenum and found that my old one was held on with gasket sealant only.

I have a factory gasket but I was gonna just use sealant only again as my old one never leaked but thought I'd ask here. As I'm worried about sealant being squeezed into the Inlet ports when I do it up.

 

What do you guys do?

 

This is a big power build 800hp approx

[R33 rb30/25 hardline from head to block]

Yep all oiling mods done. Vct welded up.

[Rb25 Coolant Flow / Hose / Swirl Pot / Header Tank Setup]

Thanks heaps mate. Could you post a couple pics of your drift car set up?

[Rb25 Coolant Flow / Hose / Swirl Pot / Header Tank Setup]

Reviving an old thread as I need to understand how to plumb the hosing for my swirl pot on rb2530det. 

None of the pictures are working thanks to photobucket. 

Can someone please post some fresh pics of their set ups or just a plumbing diagram or photo?

thanks for any help. 

[Cam gear bolts]

Thanks so much everyone [emoji106]

[Cam gear bolts]

...and nowhere sells them.
Wanna sell yours? Lol

[Cam gear bolts]

Legend. They would be just a basic metric fine thread hey?

[Cam gear bolts]

Thanks so much for the info mate but 5mm is just too small. I'll try find what your saying but in an m7 or 7mm.

[Cam gear bolts]

[Cam gear bolts]

5mm is too small.

[Cam gear bolts]

6mm is too small and 8mm is too big. I thought M5 would be 5mm?

[Cam gear bolts]

M5? Thanks mate. Is that like 7 mm? What do you mean by 8.8 grade?

[Cam gear bolts]

Can anyone please tell me where to get some factory RB cam gear bolts?

Or bolts of there type? Think they are 7mm which is very rare.

[R33 rb30/25 hardline from head to block]

Oh sweet so if I have deleted vct I can delete the drain?

[R33 rb30/25 hardline from head to block]

I am also in this boat. I notice rb26's don't seem to have this drain and others have blocked it off. Is it really required with a sump breather?
I am also worried if I plumb it into my turbo drain it will restrict the flow too much. I have a precision 6870.

[1000hp + Build]

Is this a gee up?
That turbo would look better on a dozer.

[Rb30 oil pick up]

Legend [emoji106]

[Rb30 oil pick up]

Got one at the local wreckers but no O ring.
I suppose any square edge O ring that fits will do?
Or a part number? Googles not bringing anything up.

[Rb30 oil pick up]

Really? Thanks mate I'll google a part number.
Yeah I will need to extend mine.

[True Twin Scroll Turbo & Manifold Design Discussion]

Yep exhaust manifold design was not as good as it could of been for a big precision. (Was sweet with Garrett)
It's a progate 48mm wastegate.
Yeah would be difficult on a small exhaust housing.

[Rb30 oil pick up]

Can anyone recommend where to get oem or aftermarket rb30 oil pick ups from?

Have any of you modified your own pick up for your extended sumps? Any pics appreciated.

Cheers,

[True Twin Scroll Turbo & Manifold Design Discussion]

I was using single gate on twin pulse exhaust manifold and changed to single gate off the twin scroll exhaust housing.

Works perfect.

When I was talking to 6 boost they said it was the best way to run also.