Flavel

last night I took the crank sensor out and gave it a clean unfortunately this only made it worse but its a good sign that's the problem, hopefully my new ones in tomorrow and shes cured

that's all good, and will do cheers

thanks for your help scotty, good to know its nothing major well fingers crossed anyway. you wouldn't happen to know if the part number for this is 23731-AL606? also are you still making the dump and front pipes? its been a while since I asked about these cheers

hey all so yesterday while I was driving the stagea doing low speed around a corner it shut off on me, then when I started it again the hicas light came on and also the engine light. when I got home I checked the codes and it put out 0335 which I believe to be crankshaft position sensor a circuit malfunction. now when I start the car the hicas light is gone but after about 10mins the car will loose all power for a couple of seconds and the hicas light will come back on. im guessing that at low speed the car would just shutdown again. ive done a little bit of research on this and a lot of you have had simular symptoms, but I haven't been able to find anything on this same code, has anyone had this same code and if so what was the drama?? also I have the little silver stickers on the strut tower that I believe means the cam sensors were replaced, does this also mean the crank sensor was replaced? this week im going to put it over the pit and give the sensors a clean hopefully that will do it I really want to get this sorted any help would be much appreciated

And no every thing sounds fine, it's got me stuffed

Thanks for the reply, iv checked all the lines that I find and follow they all appear to be fine, it's due for its 100000km service soon so hopefully they will pick up on what it is, and won't charge to much

Thanks for the reply, iv checked all the lines that I find and follow they all appear to be fine, it's due for its 100000km service soon so hopefully they will pick up on what it is, and won't charge to much

Thanks for the reply, iv checked all the lines that I find and follow they all appear to be fine, it's due for its 100000km service soon so hopefully they will pick up on what it is, and won't charge to much

Thanks for the reply, iv checked all the lines that I find and follow they all appear to be fine, it's due for its 100000km service soon so hopefully they will pick up on what it is, and won't charge to much

Ok my engine warning light has come on again , the code is 0171 (system too lean) iv had this code come up before so I check it all out and turned one of my hoses come off the air intake, assuming that's what it was I fixed it cleared the code but now it's back, anyone with any help ideas to what it could be would be much appreciated, also I have rechecked all hoses and clamps all seem to be fine so now I'm lost

Does anyone know if they have published these workshop manuals yet considering that they only wanted 100 request before they would publish and the request are now up to 178 for the m35, just curious because this book would really come in handy

Hey guys I'm after a m35 cargo net, let me know what you have and the price, also if anyone knows of a site you can buy them off that would be great Cheers