[Rb20 Turbo Upgrade, All Dyno Results]

R32 rb20 

Kkr430

Walbro fuel pump

Hdi intercooler

3inch turbo back

Apexi safc

Adjustable cam gears

12psi

Stock ecu

[Multipurpose R32 Gtst]

Nice looking car, u have done a good job with it.

[Kingy's 'monster Machine' - Pure Street Brawler Evo Viii]

That's beautiful, love the colour

[Spotted - QLD Skyline Owners]

Maroon r33 with the plates Tzu222

[R32 Gts+t Daily/street]

Yeah I went from a auto it heaps better now haha. How do you find the cushion button on the street.

[R32 Gts+t Daily/street]

Nice to see someone else that likes the doze i had mine doing it for nearly two years and never had a issue. Don't know why you had issues with the gearbox cross member the standard r33 manual one bolted straight up and was exactly the same as my auto one.

[Skid Pan Day At Slidewise Gympie - 18-04-15]

If it is not to late i am up for it, just need to know how far in advance payment is needed as i just busted my motor so have spent current saving.

[Aircon Back Into A 32 Gtst]

Forgot to mention the condenser, fan and something else i cant remember the name of but if you get onto a jap wreckers and just ask for all the engine bay components for the ac, you should get everything you need.

[Aircon Back Into A 32 Gtst]

It is up behind the dash but you should have two pipes with thread on them on the firewall beside the exhaust manifold if you still have it.

[Aircon Back Into A 32 Gtst]

Do you know wether or not you have the evaporater ? If so you just need the engine bay pipes and compressor.

[R32 Gts+t Daily/street]

Nice 4door, that boot lip gives it a nice touch.

[Eoi For Gympie Skidpan In 2015]

Depending on dates and finances, ill be up for it.

[Mattz 97 R33 Gtr Build]

After watching your last build I am keen to see what you do with this.

[Car "popping" And Occasional Backfire With Flames...]

When i noticed mine doing it i figured the larger exhaust would allow more air in it and once the standard cast manifold and dump pipe get hot just ignite any left over fuel.

[R33Keaton's R31 "build"]

For the motor loom if you unplug the ecu and two plugs up behind the dash more, that end should feed through behind the front passenger quater panel into engine bay, and the gearbox ones go to some plug just behind where the battery sits. Hope this helps

[R33Keaton's R31 "build"]

Looking forward to watching this build, I have a bit of a soft spot for 31s. If you remove the air on you don't need the condeser as long as the heater hoses are hooked up, the heater will still work. With the loom a auto sparky should be able to replace all plugs if not you should be able to just get a new loom.

[Amir's R33 Gts-T Build]

Mate that sucks, i hope they work out. It is reasons like these i pretty much stopped buying used. Looking forward to seeing more.

[Spotted - QLD Skyline Owners]

White r33 at Gympie Macdonald's, say sticker on drivers side

[Rb20Det Short Rad Hose Between Block And Metal Line]

the only way to do it properly would be to remove or at least loosen all the pipe bolts from the bottom of the manifold, trust me the time it will take to do that is nothing compared to keeping it all solid.

[R33 Gearbox Conversion]

You can use the auto ecu and loom and also cut down the brake pedal instead of a new one, and when you get the gear for it make sure the clutch bracket is not cracked.

[Rb20Det Into R33]

While you are at it, put a new clutch, throw out bearing, spigot bush and rear main. You probly already were going to just thought I would say it.

[Rb20Det Into R33]

I personally for the tail shaft would just get a custom one made,

[Mig Welder Machines, Whats Good?]

Uni mig a good welder and you can get them as a mig,tig,arc. Mine is a 210amp one but can get them smaller

[The Evolution Of "night Fury"]

Looks nice and clean, the wide guards realy add to it.

[17X8 Drift Teks For Sale]

where about are you located,