mickr33
-
Posts
318 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by mickr33
-
-
I'm going to go with Computer. In my very similar experience I had the exact same issues and was told get a programmable ecu and a tune. Fixed?
-
Yeah centreline=SHIT. Rolled my guards without asking me first and cracked the paint on both sides
-
Well here we go...
Very well known suspension specialist lets just say in Thomastown was where I had complete suspension replaced. Business has been there for around 20-25 years so I'm thinking yeah should be top knotch as many others have raved about this place in the past. Went there so they could inspect the vehicle on the hoist and quote. All good, needs this that and the other, no problem. So booked the car in for two weeks time. Arrive at 8 am sharp as requested. Will only be 1 day. So no phone call by 4 so I call. Um coilovers haven't arrived yet so it should be tomorrow. Ok I can live with that, these things happen. So turned up after work next day to pick the car up. Yeah all good he says and we lowered it the 15mm extra you wanted. Great I'm thinking UNTIL the words oh yeah I had to roll the front guards so it wouldn't rub. I said you what? Rolled the front guards. At this point I'm thinking OMG. So at this stage I've gone to inspect the car and gone straight for the guards. Oh low and behold the paint has cracked. I turn to him and ask the very simple question. Before you felt the need to take it apon yourself to roll the guards why, WHY on earth did you not call me first. Blank faced he says I thought I was doing the right thing. Not even a sorry came from his mouth. So he says what do you want me to do. Um I'd like it fixed thanks. He says I don't know any panel beaters. I said we'll in the 20 odd years you've been here you don't know any panel shops? So having said that I left the car and walked approx 5 k in hail to the train station without even an offer of a lift or anything by the workshop. 7 days later picked the car up and I was on my way. Even after there boasting of how good they are at alignments and hardly anyone can do a good alignment how come the cars steering wheel is way of in a straight position and pulls to the left? Even one of the items on the receipt that said was fixed has not been touched. I honestly wanted a good experience from this place and I'm appalled. Did I pay top dollar for my experience. You bet I did. Wouldn't have fazed me if I had received the service to go with the price. So now I have to find another place to get a correct wheel alignment done. I was a little paranoid leaving my car with anyone, but now I'm just super paranoid. Thanks for reading......
-
Thank you for the tyres and good customer service. But can you please update your prices on here. Thanks
-
Met Barry while getting tune done by Chian. Barry was nice to speak to and Chian's tune is absolutely awesome and this was 3 years ago. Been to a few big names for tunes but in my book Chian's tune is much better than any other I've had.
-
PM replied.
-
Hi guys. As the title says I'm after one obviously working and in good nick. Let me know if you have one. Thanks. Regards Michael
-
The only safety Mat is the right foot control and ears if it starts pinning!
-
Hi Mat. I've tried quite a few different manual controllers and I must say when these turbotech products came along, tried one and was amazed. I've currently whacked the original version back on for now so hopefully the V2 is even better. As for going the cheap I don't believe going cheap on the skyline it's just a bonus it's that price. They could of charged triple the price and I would still buy it.
-
Hi Glyn. What level of boost are you running through the V2.
-
Turns out it was the EBC. After initially receiving a dodgy solinoid when I first bought the Gizzmo and now this, I have ordered a V2 turbotech. You've had two chances Gizzmo, now you can get stuffed.
-
Good idea Daniel. I'll give it a crack. Thanks
-
Is it an internal or external gate setup? it could be running gate pressure if the EBC isn't working? Mine does that when it plays up....
It's running internal gate setup. I did think that the ebc may not be working but I can still hear the solenoid working its little heart out, so I assumed it should be working but I could be wrong.
-
Does the car feel the same? As in, does it feel slower than it used to?
Yes it does feel slower like you've turned down the boost.
-
Hey guys. I'm looking for some help on this please. The car usually runs around the 23 psi mark with no problems. It's like one day it was fine then took it out again and now it runs at a perfect 16 psi. Nothing unusual happened while driving either. The car still runs fine but at 16 instead of 23. Nothing was touched on the car or adjusted. I have taken it out a few more times since then and every time the same thing, 16 psi? Boost is controlled via a gizzmo ebc. The only thing I have tried is that I checked and re checked all joiners and clamps. I even changed a couple of silicone joiners that I felt may be suspect but still the same. Any help would be appreciated. Thanks.
-
Check out stec-motorsports. Could be an option for you.
-
Thanks for the heads up mate.
-
Car : R33 GTST owned for the past 8 years with 140rwkw stock standard. Now running 299.7rwkw
Mods: Excedy heavy duty cushion button clutch
Yellow jacket coil packs
Bosch 040 fuel pump
Nismo fuel reg
Nismo 550cc injectors
FMIC
Garrett 3076 with .82 rear
Custom 3 inch intake running to standard air box with K&N panel filter
S-tec low mount manifold
Adjustable cam gear
Apexi power FC with H/C
3 inch exhaust running to a very hi-flow cat, then GTR system from cat back (twin pipes) unsure of size
Greddy turbo timer
Pedders springs and shocks
Nissan 350z 18X8 wheels running 265/35/18 Hankook RS2 on the rear
RDA slotted front and rear discs with QFM HPX pads
-
Been going there for 2 years and always happy with there work.
-
Hi there. Im currently running a 3076 with 0.82 rear. This was initially on the stock manifold which basically would not go past 290kw. The tuner even tried going up to 23psi which resulted in no power increase. So left it on 19psi. The only change since then has been the install of a S-tec manifold which is still low mount and the end result was 18psi at 300kw. Not sure what this manifold would be restricted at but from what i've researched they are said to be good for around 340kw ish. My tuner did not even try for more as he said for a stock motor that's all he want's to push it to. So for me the S-tec low mount manifold is perfect. It is 321 stainless, fit perfectly and was finished off very well. It has been on the car for around 6 months now with no dramas and cost $450 delivered from Japan.
www.stec-motorsports.com
-
Hi,
My wife works for a finance company and used to work for a car finance broker for years, so can give you some basic advice. So i will now hand over the keyboard.
Hi guys. Most finance companies dont like imported vehicles for various reasons, however you may find some lenders who will consider an application depending on your profile. eg. some have the following conditions: Must be a homebuyer, contribute large deposit ie. 30% and a shorter loan term of say 36 months. If you go down the broker track bare in mind that you will be charged a brokerage which for some brokers can be anywhere up to $1000. There is an option of an unsecured personal loan through a bank but then that also depends on variables such as how active your credit file is, stability in residence and employment, and whether you have conducted your account well eg. have not overdrawn it in the last 3 mths.
Just something to think about....
-
I will post up results, before and after install dyno results and if there were any problems with install etc.
-
Just get one of the Stec manifolds that you have mentioned on here previously. Mine arrived yesterday and is very good quality. I purchased the sidemount one but yet to fit on. All up was $440 delivered.
-
I had a similar noise to this and it turned out to be the timing belt.
R33 GTST steering wheel
in Wanted to Buy
Posted · Edited by mickr33
Spelling
Hi guys. I'm after either buying or loaning with money a series one standard steering wheel please. Doesn't need to be a1 condition or anything. It's for a vehicle inspection. Thanks