Jump to content
SAU Community

YO880

Contributor
  • Posts

    902
  • Joined

  • Last visited

  • Feedback

    100%

Posts posted by YO880

  1. Hi Guys,

    I am having some custom gauges made up to suit an R33 RB26DETT engine, I want to get Yellow and Red permanent warning marks put on the gauges to match the style of the existing gauges.

    I am not quite sure where i would find this information, so putting it out there for the common consensus!

    What would be consistent Warning and Danger levels for the following sensors:

    Water Temperature (degrees Celsius)

    Oil Temperature (degrees Celsius)

    Oil Pressure (PSI)

    Thanks guys, appreciate the feedback

  2. Hi Guys,

    Does anyone know if Power steering reservoirs and hoses to the pump are generally interchangeable?

    I am looking for a Power steering reservoir to match an R33 RB26DETT pump.. I don't have any standard mountings in the car at the moment, so if possible i would prefer to get a nicer looking steering reservoir (like the 350Z one perhaps?), the R33 one is kind of ugly :)

    Could i get an R34 GTR or a 350/370Z reservoir and hoses and fit them straight to the R33 GTR pump?

    Thanks guys

  3. Hi Guys,

    Does anyone have an old RB26 top radiator hose (probably R32/R33) they no longer need? just looking for a very cheap 2nd hand one to check it fits before buying a silicon kit (the RB26 is going into an old skyline).

    Prefer pickup either around central Sydney or around Hills area on the weekend, but will take a posted one if its all i can get :)

    Thanks guys!

    Kent

    • R32 RB26DETT engine with forged CP pistons and ARP stud kit- professionally built by the previous owner, water pump, timing belt etc. were replaced at the time. Polished cam covers, painted blue centre cover, clear front covers. comes with twin turbo's, throttle bodies, intake manifold, wiring loom, standard computer, coil packs, CAS (though not shown in the photo), knock sensors etc. Also comes with 2x AFM's, comes with modified front aluminimum sump for RWD
    • RB25DET 5 speed gearbox with RB26DETT gear set and short shift kit
    • Nismo RB26DETT single plate clutch and nismo lightened flywheel
    • brand new nissan gearbox/engine mount bolts

    what's missing

    • a couple of bolts (ie. cas mount bolts, ignitor bolts, knock sensor bolts, flywheel bolts)
    • the Air intake temperature and water temp sensor (cheap enough new)
    • Injector dropping resistor

    should drop right into a GTST (previous owner had it fitted to a VL commodore, and ran it for 6 months after building it)

    the photos attached are of the engine, will get photo's of the gearbox etc. on the weekend (but it looks like a gearbox :)). Engine is currently on an engine stand, which will go with the engine

    $5500 pickup only from the hills district (gearbox alone is worth $1500), will not split..

    post-124-0-44758300-1301557069_thumb.jpg

    post-124-0-32206300-1301557076_thumb.jpg

    post-124-0-97786700-1301557080_thumb.jpg

  4. Hi Guys,

    I have an Asus W90VP-A1 laptop for sale.

    It is actually quite an attractive laptop (with leather and brushed aluminimum highlights) and it is practically brand new!, it has only been used a handfull of times. I bought it to replace my ageing 17" HP notebook which i use for work, but unfortunately the ASus is too big to carry around, and i don't really need another PC at home.

    The Laptop is fully spec'd out. and is amazingly quick! perfect for a gaming rig! It is comparable to the Alienware 17x only stylish :)

    Specifications:

    Intel Core 2 Quad core Q9000 (2Ghz, 6MB L2 Cache)

    Intel X38 based desktop chipset

    6GB DDR2-800 SDRAM

    2x320GB 7200RPM SATA HDD's (you can chose to stripe or mirror the disks)

    Blu-Ray Reader / DVD DL writer Combo Drive

    18.4" WUXGA (1920x1080) Color-Shine Glossy screen

    ATI Mobility Radeon HD8740 x2 Dual Graphics 512MB GDDR3 VRAM per card (yes, 2x video cards with crossfire!)

    HDMI output, full 1080p support as well as RGB output

    Built in 5.1 channel Altec Lansing speakers (including sub)

    S/PDIF output port, microphone and headphone ports

    firewire, e-sata, 4x USB 2.0 ports

    Full Size 88 key keyboard with MS keys and multi-media keys

    trackpad

    webcam and microphone

    56K modem, Bluetooth, 1Gbps Network, integrated 802.11 a/g/n Wi-Fi

    Expresscard slot

    8 in 1 memory card reader

    12 cell battery

    Windows Vista Home premium 64bit (drivers for Windows 7 available)

    It comes with an extended global warranty until the 22/5/2012

    Dimensions: 17.7" x 13.2" x 2.5" (W x D x H)

    Weight: 11.5lbs with 12-cell battery (8800mAh)

    Comes with included Asus backpack, and gaming mouse, all documentation, warranty card, recovery CD's, reciepts, original box (everything it came with) etc.

    The included backpack has a small scratch on the front of it (just from moving the thing around in the cupboard), but everything else is as new!

    Some reviews:

    http://hothardware.com/Reviews/Asus-W90Vp-...luation/?page=1

    http://www.hardwareheaven.com/reviews/810/...troduction.html

    http://www.laptopmag.com/review/laptops/asus-w90.aspx?page=3

    Will put up some pictures if requested, but it looks exactly like the one in the reviews/website above

    Looking for $2000, pickup from Sydney or i can arrange a courier at buyers expense.

    to compare, there is currently a dual core version of this notebook on ebay in the states for $2350, so this is a bargain!

    post-124-1283393543_thumb.jpg

  5. Hi Mate,

    is the clutch a nismo too? or just the flywheel?

    How many km's on it? any chance you can ship to sydney?

    thanks

    Kent

    I am selling my nismo lightened flywheel and single plate clutch kit that came out of my R33 GTR. Absolutely nothing wrong with this clutch, feel very very safe with 250AWKW. i replaced the clucth with a twin plate just as insurance as i did some work to my gtr to make 350KWAW.

    this clutch was great, never slipped, held well. no hot spots on flywheel or clutch cover.

    still plenty of meat left in the clutch.

    awesome cheap upgrade.

    Selling the pair, not splitting.

    $450 for it, will get photo's of it 2mo for ppl who like to look at things.

    any questions just contact me, im a high performance mechanic so i will be able to help with anything you need.

    chris

    0423130616

  6. i am afraid that at this point, i have no idea.. the guy making them won't know either until he makes one. He used to own a fibreglassing business, and supply prices have obviously changed over the years.

    at a guess i would expect a fibreglass bonent to be around $500+ and a full carbon bonnet around $1000+.. no idea for a mixed one.

    as a comparison, a carbon/fibreglass bonnet from restored in Japan is around $1200

×
×
  • Create New...