phat25t
-
Posts
192 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by phat25t
-
Mate I've had a few people giving me some advice to get this going so unless you got something helpful to say don't waste your time
-
Because I didn't do the job I had someone do it for me who is away on holidays
-
Cas plug is on, mate I wouldn't know where to start with checking the cam timing??
-
I'm completely lost now spent all morning checking it over, the vacuum line is connected to the fuel reg line and yeh I just made sure it's connected properly.
-
Thanks guys, Ive got tomorrow and the weekend off so I'll have a look tomorrow and let you know how I go. Cheers, steve
-
your point?
-
I'm in leeming, Its definitely sparking, just had a look. Fuel pump cranks up when put into accessories, and started to smell fuel when I tried to start it.
-
My Gtr32 won't start since I replaced my radiator water pump and fitted a profec b ii. Now that i've reassembled everything the engine turns over but will not fire. My car is stuck in my garage so if anyone has any advice or has the time to have a look at it for a carton lol it would be a great help!
-
Hey guys, Replaced water pump and radiator on my car and installed a greddy profec b ii. Now that i've put it all back together the car won't start. It's turning over but it won't fire. It started fine prior to me doing the work on the car. Anyone got any advice? Cheers
-
bump!
-
Does anyone know how to do this? can explain which hoses I need to put where or have any photos? Cheers, Steve
-
Thanks mate, I;ve got the manual. I'm not that cluey with this stuff, just hoping if someones know exactly which hoses go where.
-
Hey guys, Anyone know how to install a greddy profec b II boost controller on an r32 gtr. A photo of the installed solenoid or diagram of which wires need to go where from the standard solenoid would be good. Cheers, Steve
-
Hahahaha I know, most of the time was wasted due to me working away and...my laziness lol. Now the fun part, putting it allll back together
-
Some good news, I removed the air con condenser etc to make room for my rattle gun and came straight out, now that I have changed the waterpump and thermostat its a matter of putting everthing back in, fun times!!
-
I have a rattle gun, the problem I'm having though is it doesnt fit in the space between the pulley and the air con condenser, its an inch too deep.
-
Hey guys, I still have not been able to get this off due to time and this thing being f%$king tight. How did you guys fit an impact gun in the engine bay?? I have the radiator out but theres not enough room to get my air impact gun behind the pulley. Cheers, Steve
-
I bought a breaker bar and smashed it as hard as I could but no go, not sure what to do with it now?
-
sounds like the switch (knob thing) on the dash, same happened to mine, changed the switch and all good now
-
Hey I'm trying to remove the nut in the centre of the harmonic balancer with a power bar, I just want to make sure it needs to be turned anticlockwise because I know I've removed one on another car that was backwards(it needed to be turned clockwise to loosen. Cheers , Steve
-
Hey Guys, As above, I removed my boost restrictor from the line near the driver side strut tower the other day, took it for a drive yesterday and now the boost gauge on my blitz turbo timer is reading right up to 1.20bar, I thought it was only supposed to go to 1bar? Any advice would be greatly appreciated. Cheers, Steve
-
Hey Guys, As above, I removed my boost restrictor from the line near the driver side strut tower the other day, took it for a drive yesterday and now the boost gauge on my blitz turbo timer is reading right up to 1.20bar, I thought it was only supposed to go to 1bar? Any advice would be greatly appreciated. Cheers, Steve
-
I found it! It plugs into a nipple on the rear of the balance tube, which is the tube with the black plastic cover on it above the plenum near the injectors. Cheers
-
Hey mate thanks a lot for that, its all sorted now.
-
Yeh I know that end is right, its the other end I need to know.
