Jump to content
SAU Community

zelda

Members
  • Posts

    84
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by zelda

  1. Softer springs will help with the flutter, but it will open more at idle and cruise with vac behind it. If the flutter isn't bad just leave it, otherwise ring Turbosmart and get them to ship you the next softest spring.

    Mine doesn't flutter at all, on the evo or the Stagea.

    Plus your on over 30psi :D bet it's pretty quick
  2. Nah plenum isn't painted, just gave it a hit with a scale remover and autosol haha..

    Bov pipe is a 3" straight alloy, I picked up a couple of nipples and gave to the welder with the original pipe so he could re create the same angles etc came out really good imo.

    However i do get a bit of flutter at lower boost with the kompact if I drop the throttle.. Anyone tried softer springs with success?

    • Like 1
  3. Thanks for that, i had replaced the vac hose with the restrictor in it but changed it back shortly after, gauge started reading a little better once i did, but this is what leads me to think it may be a boost leak... or just dodge boost gauge in general.

    For a bung in the intake could i remove the bleed hose on the bov pipe (not the boost sensor one) and block it off and dump 25psi down the nipple ( with tight commections etc

    obviously)

    We can get e85 over here but not at any pump, just by the barrel

  4. Hey all

    just like to say brilliant information you guys have all dug up on m35s for the past few years

    Have been reading these forums for quite some time but have a few questions in regards to my project

    03 vq25det, 170k on clock. has hdi kit, bc golds and 18x9.5 wolfs 245/45/18s.

    Scottys dump on its way and dales suction pipe on its way also, followed by cat back and hks fcon ( i have the harness already-score!) ss1 turbo injectors etc.

    1. once the intake pipe and dump are put on will i be having issues with injectors? i dont want to run lean and blow engines

    2. what is the best way to give these a boost leak test? after doing fmic and some vac hoses my boost gauge only reads half bar when it used to boost to just shy of one.. i dont want to upset the throttle body etc so info would be marvelous

    3. hks fcon. do i have to buy one with a base tune installed or can my hks dealer reprog a 2nd hand one for me? im in NZ and suichi from ST Hi Tec will be doing the tune as he has done reprieves m35 previously.

    Not looking for crazy kws but a nice street tune that will leave 20/25 det owners scratching their heads. say around 250atw

    thanks a bunch. i think its great stagea owners out their have shared their knowledge its been so helpfull thus far. Zach

×
×
  • Create New...